Filter by
For Load Direction
Bearing Type
DFARS Compliance
About Ball and Roller Bearings
More
Set Screw Collar Ball Bearings
With Retaining Ring
Slip these bearings onto a shaft and secure with the included set screws, no special tools required. All have an extended inner ring for additional shaft support.
Sealed bearings block out dust and other contaminants better than shielded bearings.
Bearings with a retaining ring have a removable retaining ring that holds the bearing inside a housing.
For technical drawings and 3-D models, click on a part number.
Inner Ring | Retaining Ring | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number  | For Shaft Dia. | For Housing ID | Wd. | OD | Wd. | OD | Thick. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | ABEC Rating | Each | |
Sealed (Lubricated) | ||||||||||||||
Steel—With Retaining Ring | ||||||||||||||
| 7618-2RS | 1 1/8" | 2 9/16" | 3/4" | 1.672" | 1.417" | 2.766" | 0.065" | 5,350 | 2,600 | 5,000 | -20° to 250° | Not Rated | 0000000 | 000000 |