FZ 6207 2RS Bearings | McMaster-Carr

Prevent shafts from reversing direction. These bearings have internal components (sprags) that lock against the outer ring to transmit torque one way but spin freely in the other. They're often found in backstopping, indexing, and overrunning applications. For example, they're used to prevent conveyors from reversing.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

ABEC Rating—Bearings with an ABEC rating meet industry tolerance standards established by the Annular Bearing Engineers Committee (ABEC). They're rated on a scale from 1 to 9. The higher the rating, the tighter the tolerance. Bearings rated ABEC 1 or 3 are precise enough for most applications. If your application consistently runs at high speeds or requires high accuracy, consider bearings rated ABEC 5 or higher, since they generate less friction and heat.

								Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Max. Torque, ft·lbf	Min.	Max.	Inner Ring Type	Bearing Trade No.		Each
Sealed







				Steel

				35	72	22	1	1,830	3,600	240	-40	170	Standard	FZ 6207 2RS	0000000	0000000
				One-Way-Locking Ball Bearing, Sealed, Trade No. Fz 6207 2RS, for 35 mm Shaft Diameter Product Detail QuantityEachDelivers Tuesday Solidworks 2022 and Parasolid files now available. Parasolid files now available.