Track Roller Carriages And Guide Rails

Filter by

Rail Width

Dynamic Load Capacity

Less than 1,000 lb.

1,000 lb. to 9,999 lb.

Track Roller Type

Carriage Width

Carriage Length

Bearing Type

Carriage Material

Roller Material

Static Load Capacity

Overall Height

Bearing Material

Mounting Hole Thread Size

Maximum Temperature

Roller Diameter

Carriage and Guide Rail Type

Lubrication

Number of Track Rollers

Rail Type

Curved

Double

Single

Track Roller Adjustability

Mounting Hole Depth

Number of Mounting Holes

REACH

Compliant

Not Compliant

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

RoHS

Compliant

Compliant with Exemptions

Lubricant

94 Products

Side-Mount Track Roller Carriages and Guide Rails

Carriage

Carriage with Wipers

Guide Rail

Mount along a wall or other vertical surface.

Carriages with adjustable rollers can be adjusted for a snug or loose fit on the rail (also known as preload).

Carriages with wipers sweep away dust and other contaminants.

Carriages with Fixed Rollers									Guide Rails
For Rail Wd.	Dynamic Load Cap., lbs.	O'all Ht.	Carriage Wd.	Carriage Lg.	Roller Dia.	Max. Temp., °F		Each	Rail Lengths		Per Inch
Aluminum Carriages with Steel Rollers
1.328"	330	0.938"	1.25"	3.25"	0.711"	175°	0000000	0000000	12"; 24"; 36"; 72"	0000000	00000
1.921"	840	1.125"	1.5"	4.5"	1.21"	175°	0000000	000000	12"; 24"; 36"; 72"	0000000	0000
Aluminum Carriages with Plastic Wipers and Steel Rollers
1.328"	340	0.938"	1.25"	4.125"	0.771"	175°	00000000	000000	12"; 24"; 36"; 72"	0000000	0000
1.921"	850	1.125"	1.5"	5.375"	1.21"	175°	00000000	000000	12"; 24"; 36"; 72"	0000000	0000

Carriages with Adjustable Rollers									Guide Rails
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Roller Dia., mm	Max. Temp., °F		Each	Rail Lengths, mm		Per mm
Zinc-Plated Steel Carriages with Steel Rollers
19.2	70	17.8	10	60	14	245°	000000	0000000	320; 640; 1,280; 1,840	0000000	00000
Aluminum Carriages with Plastic Wipers and Steel Rollers
30	220	28	25	87	16	175°	00000000	000000	480; 720; 960; 1,440	0000000	000
30	220	28	25	112	16	175°	00000000	000000	480; 720; 960; 1,440	0000000	000
30	330	28	25	137	16	175°	00000000	000000	480; 720; 960; 1,440	0000000	000
45	590	33	38	117	24	175°	00000000	000000	480; 720; 960; 1,440	0000000	000
45	590	33	38	152	24	175°	00000000	000000	480; 720; 960; 1,440	0000000	000
45	890	33	38	190	24	175°	00000000	000000	480; 720; 960; 1,440	0000000	000
65	1,300	42	51	162	35	175°	00000000	000000	480; 720; 960; 1,440	0000000	000
65	1,300	42	51	215	35	175°	00000000	000000	480; 720; 960; 1,440	0000000	000
65	2,000	42	51	269	35	175°	00000000	000000	480; 720; 960; 1,440	0000000	000

Self-Aligning Side-Mount Track Roller Carriages and Guide Rails

Fixed-Alignment Carriage

Self-Aligning Carriage

Self-Aligning Rail

Fixed-Alignment Rail

Create a self-aligning carriage and guide rail system to compensate for mounting surfaces that aren't parallel. The floating bearing in these carriages adjusts to correct misalignment between rails, so your carriages still move in tandem. A complete system includes a fixed-alignment carriage and rail on one side and a self-aligning carriage and rail on the other. All components are sold separately.

Carriages can be adjusted for a snug or loose fit on the rail (also known as preload). They have permanently lubricated rollers to save maintenance time and effort.

Fixed-alignment rails have a C-shaped profile that ensures the system travels in a straight line.

Self-aligning rails have a rectangular profile that allows the carriage to move freely from side to side to compensate for misalignment.

18 mm Carriage Wd.—80 mm Carriage Lg.

Aluminum Carriages with Plastic Wipers and Adjustable Acetal Plastic Rollers								Aluminum Guide Rails
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Roller Dia., mm	Axial Misalignment Capability, mm	Max. Temp., °F		Each	Rail Lengths, mm		Per mm
Fixed Alignment
20	12	22	14.83	__	245°	00000000	0000000	320; 640; 1,280; 1,840	0000000	00000
Self Aligning
20	12	23.09	14.83	1.09	245°	00000000	000000	320; 640; 1,280; 1,840	0000000	000

20 mm Carriage Wd.—80 mm Carriage Lg.

Zinc-Plated Steel Carriages with Adjustable Steel Rollers								Zinc-Plated Steel Guide Rails
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Roller Dia., mm	Axial Misalignment Capability, mm	Max. Temp., °F		Each	Rail Lengths, mm		Per mm
Fixed Alignment
29.5	190	26.5	22.8	__	245°	000000	0000000	320; 640; 1,280; 1,840	0000000	00000
Self Aligning
31.8	190	28	23.2	2	245°	000000	000000	320; 640; 1,280; 1,840	0000000	000

25 mm Carriage Wd.—120 mm Carriage Lg.

Zinc-Plated Steel Carriages with Adjustable Steel Rollers
				Misalignment Capability					Zinc-Plated Steel Guide Rails
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Roller Dia., mm	Axial, mm	Parallel, mm	Max. Temp., °F		Each	Rail Lengths, mm		Per mm
Fixed Alignment
45	390	38	35.6	__	3.5	245°	00000000	0000000	320; 640; 1,280; 1,840	0000000	00000
Self Aligning
45	390	37.25	35	1.75	3.5	245°	00000000	000000	320; 640; 1,280; 1,840	0000000	000

35 mm Carriage Wd.—135 mm Carriage Lg.

Zinc-Plated Steel Carriages with Adjustable Steel Rollers
				Misalignment Capability					Fixed-Alignment Zinc-Plated Steel Guide Rails			Self-Aligning Zinc-Plated Steel Guide Rails
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Roller Dia., mm	Axial, mm	Parallel, mm	Max. Temp., °F		Each	Rail Lengths, mm		Per mm	Rail Lengths, mm		Per mm
Fixed Alignment/Self Aligning
40	350	28.65	31.5	1.6	3.4	245°	00000000	0000000	320; 640; 1,280; 1,840	0000000	00000	320; 640; 1,280; 1,840	0000000	00000

Light Duty Side-Mount Track Roller Carriages and Guide Rails

Carriage

Use these carriages and guide rails for light loads where precise movement is not required.

							Steel Carriages with Fixed Plastic Rollers
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Roller Dia., mm	Max. Temp., °F		Each
36	5	12	60	70	19	175°	000000	000000

Corrosion-Resistant Side-Mount Track Roller Carriages and Guide Rails

Carriage

Guide Rail

These track roller carriages and guide rails are stainless steel for use in wet, corrosive environments. Carriages can be adjusted for a snug or loose fit on the rail (also known as preload). A wiper on one side of the carriage sweeps away dust and other contaminants.

316 Stainless Steel Carriages with Adjustable 440 Stainless Steel Rollers									316 Stainless Steel Guide Rails
For Rail Wd.	Dynamic Load Cap., lbs.	O'all Ht.	Carriage Wd.	Carriage Lg.	Roller Dia.	Max. Temp., °F		Each	Rail Lengths, ft.		Per Ft.
1.16"	170	0.81"	1.06"	3.15"	0.90"	210°	000000	0000000	1; 2; 3; 4; 5; 6; 7; 8	00000000	000000
1.83"	350	1.22"	1.57"	5.31"	1.40"	210°	000000	000000	1; 2; 4; 5; 6; 8	00000000	00000

Track Roller Carriages and Guide Rails

Carriage

Guide Rail

Support Rail

V-shaped rollers and rails allow these carriages to operate well in dirty environments because the debris won't get trapped on the rail. Wipers sweep away dust and contaminants and distribute lubricant along the rail. Carriages can be adjusted for a snug or loose fit on the rail (also known as preload). Mount in any orientation without affecting load capacity.

0.516" wide guide rails require a support rail (sold separately) for carriage clearance. Order one per guide rail.

Aluminum Carriages with Adjustable Steel Rollers								Aluminum Support Rails			Steel Guide Rails
For Rail Wd.	Dynamic Load Cap., lbs.	O'all Ht.	Carriage Wd.	Carriage Lg.	Max. Temp., °F		Each	Rail Lengths		Per Inch	Rail Lengths		Per Inch
0.516"	110	0.788"	1.75"	2"	245°	000000	0000000	6 1/2"; 12 1/2"; 18 1/2"; 24 1/2"; 30 1/2"; 36 1/2"	000000	00000	6 1/2"; 12 1/2"; 18 1/2"; 24 1/2"; 30 1/2"; 36 1/2"	000000	00000
							Each						Per mm
50mm	220	32mm	80mm	90mm	155°	000000	000000	__	000000	00	200mm; 400mm; 700mm; 1,000mm	0000000	000
72mm	550	43mm	116mm	127mm	155°	000000	000000	__	000000	00	400mm; 800mm; 1,150mm; 1,800mm	0000000	000
102mm	1,450	57mm	165mm	172mm	155°	000000	000000	__	000000	00	500mm; 800mm; 1,100mm; 2,200mm	0000000	000
140mm	3,500	69mm	222mm	242mm	155°	000000	000000	__	000000	00	750mm; 1,100mm; 1,500mm; 2,000mm	0000000	000

High-Temperature Track Roller Carriages and Guide Rails

Carriage

Guide Rail

Support Rail

High-temperature PTFE-thickened grease enables these carriages to operate in temperatures up to 500° F, higher than any other carriage that we offer. Their V-shaped rails allow them to operate well in dirty environments because the debris won’t get trapped on the rail. Wipers sweep away dust and contaminants and distribute lubricant along the rail. Carriages can be adjusted for a snug or loose fit on the rail (also known as preload). Mount in any orientation without affecting load capacity.

Guide rails require a support rail (sold separately) for carriage clearance. Order one per guide rail.

Aluminum Carriages with Adjustable 440 Stainless Steel Rollers								Steel Guide Rails			Aluminum Support Rails
For Rail Wd.	Dynamic Load Cap., lbs.	O'all Ht.	Carriage Wd.	Carriage Lg.	Max. Temp., °F		Each	Rail Lengths		Per Inch	Rail Lengths		Per Inch
0.516"	90	0.788"	1.75"	2"	500°	000000	0000000	6 1/2"; 12 1/2"; 18 1/2"; 24 1/2"; 30 1/2"; 36 1/2"	000000	00000	6 1/2"; 12 1/2"; 18 1/2"; 24 1/2"; 30 1/2"; 36 1/2"	000000	00000

Light Duty Track Roller Carriages and Guide Rails

Carriage

Guide Rail

Support Rail

Nylon rollers provide low-friction movement for light loads and corrosive environments. The V-shaped profile of the rollers and rails prevents debris from becoming trapped on the rail. Wipers sweep away dust and contaminants and distribute lubricant along the rail. Carriages can be adjusted for a snug or loose fit on the rail (also known as preload). Mount in any orientation without affecting load capacity.

Guide rails require a support rail (sold separately) for carriage clearance. Order one per guide rail.

Aluminum Carriages with Adjustable Nylon Plastic Rollers								Steel Guide Rails			Aluminum Support Rails
For Rail Wd.	Dynamic Load Cap., lbs.	O'all Ht.	Carriage Wd.	Carriage Lg.	Max. Temp., °F		Each	Rail Lengths		Per Inch	Rail Lengths		Per Inch
0.516"	10	0.788"	1.75"	2"	245°	000000	0000000	6 1/2"; 12 1/2"; 18 1/2"; 24 1/2"; 30 1/2"; 36 1/2"	000000	00000	6 1/2"; 12 1/2"; 18 1/2"; 24 1/2"; 30 1/2"; 36 1/2"	000000	00000

Locking High-Load Track Roller Carriages and Guide Rails

Carriage

Guide Rail

Replacement Clamp Jaw Kit

Replacement Locking Handle

A handle on the side of the carriage locks the carriage in place. Made with needle-roller bearings, these track roller carriages have higher load capacities than other track roller carriages. Carriages can be adjusted for a snug or loose fit on the rail (also known as preload). Rollers are permanently lubricated to save maintenance time and effort.

Aluminum Carriages with Adjustable Steel Rollers											Anodized Aluminum Guide Rails			Replacement Clamp Jaw Kits		Replacement Locking Handles
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Wd., mm	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Handle Lg., mm	Max. Temp., °F	Max. Clamping Force, lbs.		Each	Rail Lengths, mm		Per mm		Each		Each
15.5	940	80	24	47	88	45	175°	40	0000000	0000000	220; 340; 640; 1,240	0000000	00000	0000000	0000000	0000000	000000
21	1,200	63	30	63	102	45	175°	55	0000000	000000	220; 340; 640; 1,240	0000000	000	0000000	000000	0000000	00000
23	2,000	103	36	70	108	45	175°	55	0000000	000000	220; 340; 640; 1,240	0000000	000	0000000	000000	0000000	00000
32	2,800	142	48	100	145	78	175°	75	0000000	000000	220; 340; 640; 1,240	0000000	000	0000000	000000	0000000	00000
45	4,700	120	60	120	175	78	175°	165	0000000	000000	340; 640; 1,240	0000000	000	0000000	000000	000000	00

High-Load Track Roller Carriages and Guide Rails

Carriage

Guide Rail

Needle-roller bearings give these track roller carriages higher load capacities than other track roller carriages. Carriages can be adjusted for a snug or loose fit on the rail (also known as preload). Mount in any orientation without affecting load capacity. Rollers are permanently lubricated to save maintenance time and effort.

Aluminum Carriages with Adjustable Steel Rollers								Anodized Aluminum Guide Rails
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Max. Temp., °F		Each	Rail Lengths, mm		Per mm
12	620	19	37	74	175°	000000	0000000	220; 340; 640; 1,240	0000000	00000
15.5	940	24	47	88	175°	000000	000000	220; 340; 640; 1,240	0000000	000
23	2,000	36	70	108	175°	000000	000000	220; 340; 640; 1,240	0000000	000
32	2,800	48	100	145	175°	000000	000000	220; 340; 640; 1,240	0000000	000

Side-Mount Track Roller Carriages for T-Slotted Framing

Combine with a T-slotted rail to add linear motion to your assembly.

T-slotted rails can be easily cut to length and drilled for mounting.

View additional T-slot hardware and accessories.

End caps mount on the rails to prevent rollers from overtravel.

Carriages and T-Slot Fasteners

Carriage for Single Rail

Carriage
for
Double Rail

Aluminum Carriages with Nylon Plastic Rollers											T-Slotted Framing Fasteners
For Rail Wd.	Dynamic Load Cap., lbs.	O'all Ht.	Carriage Wd.	Carriage Lg.	Roller Dia.	Bearing Material	Max. Temp., °F	Includes		Each		Pkg.
For Single Rail
1"	25	1 5/16"	3 1/8"	1"	1 1/2"	Bronze	150°	Two Socket Head Screws, Two T-Slot Fasteners	000000	000000	000000000	00000
1 1/2"	25	1 7/8"	4 5/8"	1 1/2"	2"	Bronze	150°	Two Socket Head Screws, Two T-Slot Fasteners	000000	00000	00000000	0000
For Double Rail
2"	25	1 5/16"	4 1/8"	1"	1 1/2"	Bronze	150°	Two Socket Head Screws, Two T-Slot Fasteners	000000	00000	000000000	0000
3"	25	1 7/8"	6 1/8"	1 1/2"	2"	Bronze	150°	Two Socket Head Screws, Two T-Slot Fasteners	000000	00000	00000000	0000

T-Slotted Rails and End Caps

Anodized Aluminum T-Slotted Rails											T-Slotted Framing Caps, Covers, and Seals
Rail Wd.	Rail Ht.		1 ft.	2 ft.	3 ft.	4 ft.	5 ft.	6 ft.	8 ft.	10 ft.		Each
Single Rail
1"	1"	000000000	00000	000000	000000	000000	000000	000000	000000	000000	00000000	00000
1 1/2"	1 1/2"	000000000	00000	00000	00000	00000	00000	00000	00000	00000	00000000	0000
Double Rail
2"	1"	000000000	00000	00000	00000	00000	00	00000	00000	00000	00000000	0000
3"	1 1/2"	000000000	00000	00000	00000	00000	00	000000	000000	000000	00000000	0000

Track Roller Carriages and Guide Rails for Curves

Carriage

90° Angle Rail

Half Round Rail

Round Rail

Create a low-maintenance system with loops and curved paths in assembly stations and other repetitive processes. The track rollers that support these carriages keep contaminants out in dusty environments and prevent debris from getting trapped on the rail. You can adjust the carriages for a snug or loose fit on the rail (also known as preload).

Note: Each carriage can only be used with its corresponding guide rail.

Steel Carriages with Adjustable Steel Rollers										90° Angle Steel Guide Rails			Half-Round Steel Guide Rails			Round Steel Guide Rails
For Rail Bend Radius, mm	For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Roller Dia., mm	Max. Temp., °F		Each	Rail Lg., mm		Each	Rail Lg., mm		Each	Rail Lg., mm		Each
175	25	350	30.5	80	105	25	175°	0000000	0000000	276	0000000	0000000	551	0000000	000000000	1,103	0000000	000000000