About Ball and Roller Bearings
More
Hex-Bore Ball Bearings
Mount these bearings onto a hex shaft. All have an extended inner ring for additional shaft support. Seals keep out dust and contaminants.
For technical drawings and 3-D models, click on a part number.
Inner Ring | Radial Load Cap., lbs. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number  | For Shaft Wd. | Hex Wd. | For Housing ID | Wd. | OD | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Sealed | |||||||||||||||
| HPC011GP | 11/16" | 0.695" | 1.8504" | 0.551" | 1.166" | 0.827" | Steel | 2,850 | 1,500 | 6,000 | Not Required | -40° to 250° | ABEC-1 | 000000 | 000000 |
Set Screw Collar Ball Bearings
Slip these bearings onto a shaft and secure with the included set screws, no special tools required. All have an extended inner ring for additional shaft support.
Bearings with a black-oxide steel ring have some corrosion resistance.
Shielded bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust and other contaminants better than shielded bearings.
Bearings with a retaining ring have a removable retaining ring that holds the bearing inside a housing.
Flanged bearings have a flange that ensures proper positioning inside a tube or housing.
For technical drawings and 3-D models, click on a part number.
Inner Ring | Retaining Ring | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Wd. | OD | Thick. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | ABEC Rating | Each | |
Shielded (Lubricated) | ||||||||||||||
Black-Oxide Steel—With Retaining Ring | ||||||||||||||
| ER8 | 1/2" | 1.8504" | 5/8" | 1.109" | 1.219" | 2.063" | 0.047" | 3,200 | 1,400 | 9,200 | -40° to 250° | ABEC-1 | 0000000 | 000000 |
Sealed (Lubricated) | ||||||||||||||
Black-Oxide Steel—With Retaining Ring | ||||||||||||||
| ER10 | 5/8" | 1.8504" | 5/8" | 1.115" | 1.219" | 2.063" | 0.047" | 2,850 | 1,450 | 5,000 | -20° to 250° | Not Rated | 0000000 | 00000 |
| ER12 | 3/4" | 1.8504" | 5/8" | 1.115" | 1.219" | 2.063" | 0.047" | 2,850 | 1,450 | 5,000 | -20° to 250° | Not Rated | 0000000 | 00000 |
Steel—Flanged | ||||||||||||||
| GYA012RRB | 3/4" | 1.8504" | 0.551" | 1.1406" | 1.063" | __ | __ | 3,200 | 1,400 | 9,100 | -65° to 250° | ABEC-1 | 0000000 | 00000 |