About Ball and Roller Bearings
More
Washdown Set Screw Collar Ball Bearings
Secure these bearings in washdown areas, such as food, beverage, pharmaceutical, and chemical plants, by tightening the set screw onto a shaft—no additional collar needed. Similar to 304 stainless steel, the nickel-coated steel rings on these bearings won’t break down from water. The extended inner ring increases shaft support. All of these bearings have NSF registered H1 lubrication, which is certified for incidental contact with food.
For technical drawings and 3-D models, click on a part number.
Inner Ring | Retaining Ring | Radial Load Cap., lbs. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | For Housing ID | Wd. | OD | Wd. | OD | Thick. | Seal Type | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Environmental Rating | Each | |
Nickel-Coated Steel Ring | ||||||||||||||||
| 1" | 2.047" | 3/4" | 1.85938" | 1.375" | 2.26563" | 0.04688" | Sealed | 2,800 | 1,650 | 2,700 | Lubricated | -20 to 220 | ABEC-1 | IP69K | 0000000 | 0000000 |
Washdown Clamp-On Collar Ball Bearings
Designed to stand up to frequent washdowns, you can quickly secure these ball bearings onto shafts with the clamp-on collar in food, beverage, pharmaceutical, and chemical plants. The collar centers your shafts and secures them better than set screw ball bearings, which reduces vibration and noise. To install these bearings, tighten the single screw on the collar around its inner ring on your shaft for a mar-free hold.
Coated with nickel, the steel rings on these bearings won’t corrode from water and harsh cleaners, similar to 304 stainless steel. The inner ring is extended for added shaft support. All of these bearings have NSF registered H1 lubrication, which is certified for incidental contact with food and is suitable for food and beverage applications.
For technical drawings and 3-D models, click on a part number.
Inner Ring | Retaining Ring | Radial Load Capacity, lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | For Housing ID | Wd. | OD | OD Tolerance | Wd. | OD | Thick. | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Sealed | |||||||||||||||
Nickel-Coated Steel Ring | |||||||||||||||
| 1" | 2.047" | 3/4" | 1.21875" | Not Rated | 1.4375" | 2.26563" | 0.04688" | 2,800 | 1,650 | 2,700 | Lubricated | -20° to 220° | ABEC-1 | 0000000 | 0000000 |