2 3/8" Housing ID Bearings

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

841 Bronze Bearings

For 2" Shaft Dia.
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
2 3/8"	1 1/8"	4,500 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	000000
2 3/8"	1 1/2"	6,000 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000
2 3/8"	1 3/4"	7,000 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000
2 3/8"	2"	8,000 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000
2 3/8"	2 1/2"	9,700 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000
2 3/8"	2 3/4"	10,500 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000
2 3/8"	3"	12,000 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000
2 3/8"	4"	16,000 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000
For 2 3/16" Shaft Dia.
2 3/8"	1 1/2"	6,500 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000

High-Load Oil-Embedded Sleeve Bearings

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

863 Iron-Copper Bearings

For 2" Shaft Dia.
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
2 3/8"	1 1/8"	5,000 lbs. @ 30 rpm	Lubricated	SAE 90 Oil	-15° to 300°	00000000	000000
2 3/8"	1 1/2"	6,650 lbs. @ 30 rpm	Lubricated	SAE 90 Oil	-15° to 300°	00000000	00000
2 3/8"	2"	8,900 lbs. @ 30 rpm	Lubricated	SAE 90 Oil	-15° to 300°	00000000	00000
2 3/8"	3"	13,350 lbs. @ 30 rpm	Lubricated	SAE 90 Oil	-15° to 300°	00000000	00000

High-Temperature Dry-Running Sleeve Bearings

Graphite provides a layer of dry lubrication that operates in high-temperature environments.

841 bronze bearings are porous and embedded with graphite for continuous lubrication.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Embedded

841 Bronze Bearings
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication Method	Temperature Range, °F		Each
For 2" Shaft Dia.
2 3/8"	1 1/8"	3,600 lbs. @ 30 rpm	Embedded	-50° to 700°	00000000	000000
2 3/8"	1 1/2"	4,800 lbs. @ 30 rpm	Embedded	-50° to 700°	00000000	00000
2 3/8"	2"	6,400 lbs. @ 30 rpm	Embedded	-50° to 700°	00000000	00000
2 3/8"	3"	9,600 lbs. @ 30 rpm	Embedded	-50° to 700°	00000000	00000
2 3/8"	4"	12,800 lbs. @ 30 rpm	Embedded	-50° to 700°	00000000	00000

Multipurpose Sleeve Bearings

These 660 leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 932 bronze bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

660 Leaded Bronze Bearings
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Temperature Range, °F		Each
For 2" Shaft Dia.
2 3/8"	1 1/8"	9,000 lbs. @ 30 rpm	Required	-350° to 450°	00000000	000000
2 3/8"	1 1/2"	12,000 lbs. @ 30 rpm	Required	-350° to 450°	00000000	00000
2 3/8"	2"	16,000 lbs. @ 30 rpm	Required	-350° to 450°	00000000	00000
2 3/8"	3"	24,000 lbs. @ 30 rpm	Required	-350° to 450°	00000000	00000
2 3/8"	4"	32,000 lbs. @ 30 rpm	Required	-350° to 450°	00000000	00000

Multipurpose Sleeve Bearings with Groove

A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface. Bearings are cast bronze, making them strong, wear resistant, and excellent at handling shock loads. 660 leaded bronze is sometimes called 932 bronze.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

660 Leaded Bronze Bearings
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Temperature Range, °F		Each
For 2" Shaft Dia.
2 3/8"	3"	21,000 lbs. @ 30 rpm	Required	-350° to 450°	0000000	000000

Needle-Roller Bearings

Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together. Bearings take on the shape of their housing and may be oblong prior to installation.

Open bearings dissipate heat more efficiently than sealed bearings.

For technical drawings and 3-D models, click on a part number.

				Radial Load Cap., lbs.
For Shaft Dia.	For Housing ID	Wd.	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	For Shaft Surface Smoothness (Ra), microinch	Temp. Range, °F		Each
Open
2"	2 3/8"	1/2"	Steel	4,900	7,900	5,500	Required	8	-40° to 280°	00000000	00000