29mm Housing ID Bearings

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 841 Bronze Bearings

For 22 mm Shaft Dia.
For Housing ID, mm	Lg., mm	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
29	18	1,200 lbs. @ 60 rpm	Lubricated	SAE 30 Oil	-35° to 300°	0000000	00000
29	22	1,500 lbs. @ 60 rpm	Lubricated	SAE 30 Oil	-35° to 300°	0000000	0000
29	35	2,350 lbs. @ 60 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	0000

High-Load Oil-Embedded Sleeve Bearings

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

863 Iron-Copper Bearings

For 22mm Shaft Dia.
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
29mm	18mm	1,550 lbs. @ 60 rpm	Lubricated	SAE 90 Oil	-15° to 300°	00000000	00000
29mm	22mm	1,900 lbs. @ 60 rpm	Lubricated	SAE 90 Oil	-15° to 300°	00000000	0000

Ultra-Low-Friction Oil-Embedded Sleeve Bearings

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 841 Bronze Bearings

For 22mm Shaft Dia.
For Housing ID, mm	Lg., mm	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
29	18	1,200 lbs. @ 60 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	00000000	00000
29	22	1,450 lbs. @ 60 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	00000000	0000

Food Industry Oil-Embedded Sleeve Bearings

The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

841 Bronze Bearings

For 22mm Shaft Dia.
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
29mm	18mm	1,200 lbs. @ 60 rpm	Lubricated	SAE 20 Oil	-75° to 300°	00000000	00000
29mm	22mm	1,500 lbs. @ 60 rpm	Lubricated	SAE 20 Oil	-75° to 300°	00000000	0000

High-Load Food Industry Oil-Embedded Sleeve Bearings

Embedded with oil that is safe for incidental contact with food, these bearings are suitable for use in high-load applications such as bottling and filling lines in food processing plants. They are also known as Super Oilite® bearings. Startup friction releases the embedded oil onto their surface in a thin layer. Bearings are made of 863 iron-copper, which makes these bearings strong and resistant to shock loads.

Bearings with NSF H1 registered lubrication comply with NSF standards for incidental contact with food.

For technical drawings and 3-D models, click on a part number.

863 Iron-Copper
For Housing ID	Length	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F	Specifications Met		Each
For 22mm Shaft Dia.
29mm	18mm	1,550 lbs. @ 60 rpm	Lubricated	SAE 20 Oil	-75° to 300°	ASTM B439, NSF Registered H1	00000000	000000
29mm	22mm	1,900 lbs. @ 60 rpm	Lubricated	SAE 20 Oil	-75° to 300°	ASTM B439, NSF Registered H1	00000000	00000

High-Load Ultra-Low-Friction Oil-Embedded Sleeve Bearings

Use these bearings for frequent starts and stops in high-load applications. Startup friction causes these bearings to release a thin layer of oil that contains PTFE to lubricate the bearing’s surface. All have more iron content than standard oil-embedded bearings to handle heavier loads and higher shock loads, but operate at lower speeds.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

863 Bearing Bronze
For Housing ID, mm	Length, mm	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 22 mm Shaft Dia.
29	18	1,550 lbs. @ 60 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	00000000	00000
29	22	1,900 lbs. @ 60 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	00000000	0000

Light Duty Dry-Running Sleeve Bearings

Use where high loads and speeds are not required.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric Nylon Bearings
For Housing ID	Lg.	Dynamic Radial Load Capacity	Color	Temperature Range, °F		Each
For 22mm Shaft Dia.
29mm	18mm	110 lbs. @ 60 rpm	Off-White	-10° to 220°	0000000	000000
29mm	22mm	135 lbs. @ 60 rpm	Off-White	-10° to 220°	00000000	00000
29mm	35mm	215 lbs. @ 60 rpm	Off-White	-10° to 220°	00000000	00000

Multipurpose Sleeve Bearings

These 660 leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 932 bronze bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 660 Leaded Bronze Bearings
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Temperature Range, °F		Each
For 22mm Shaft Dia.
29mm	22mm	3,000 lbs. @ 60 rpm	Required	-350° to 450°	0000000	00000

Oil-Embedded Flanged Sleeve Bearings

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 841 Bearing Bronze Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 22mm Shaft Dia.
29mm	22mm	36mm	3.5mm	1,500 lbs. @ 60 rpm	1,950 lbs. @ 60 rpm	Lubricated	SAE 30 Oil	-35° to 300°	0000000	00000

High-Load Oil-Embedded Flanged Sleeve Bearings

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

863 Bronze Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 22mm Shaft Dia.
29mm	18mm	36mm	3.5mm	1,550 lbs. @ 60 rpm	1,550 lbs. @ 60 rpm	Lubricated	ISO 460 Oil	-15° to 300°	00000000	00000
29mm	22mm	36mm	3.5mm	1,900 lbs. @ 60 rpm	1,550 lbs. @ 60 rpm	Lubricated	ISO 460 Oil	-15° to 300°	00000000	00000

Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

841 Bronze Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 22mm Shaft Dia.
29mm	18mm	36mm	3.5mm	1,200 lbs. @ 60 rpm	1,950 lbs. @ 60 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	00000000	00000
29mm	22mm	36mm	3.5mm	1,450 lbs. @ 60 rpm	1,950 lbs. @ 60 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	00000000	00000

Food Industry Oil-Embedded Flanged Sleeve Bearings

The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

841 Bronze Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F	Specifications Met		Each
For 22mm Shaft Dia.
29mm	18mm	36mm	3.5mm	1,200 lbs. @ 60 rpm	1,950 lbs. @ 60 rpm	Lubricated	SAE 20 Oil	-75° to 300°	FDA Compliant 21 CFR 178.3570	00000000	000000
29mm	22mm	36mm	3.5mm	1,500 lbs. @ 60 rpm	1,950 lbs. @ 60 rpm	Lubricated	SAE 20 Oil	-75° to 300°	FDA Compliant 21 CFR 178.3570	00000000	00000

High-Load Food Industry Oil-Embedded Flanged Sleeve Bearings

Embedded with lubricant that’s FDA compliant for incidental food contact, these bearings are good for high-load applications such as bottling and filling lines in food plants. They’re also known as Super Oilite® bearings. The lubricant releases in a thin layer on the surface of these bearings when they encounter friction.

841 bearing bronze sleeve bearings handle higher speeds than 863 bearing bronze sleeve bearings.

For technical drawings and 3-D models, click on a part number.

841 Bearing Bronze Bearings
For Housing ID	Length	Flange OD	Flange Thickness	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F	Specifications Met		Each
For 22mm Shaft Dia.
29mm	18mm	36mm	3.5mm	1,200 lbs. @ 60 rpm	1,950 lbs. @ 60 rpm	Lubricated	SAE 20 Oil	-75° to 300°	FDA Compliant 21 CFR 178.3570	00000000	000000
29mm	22mm	36mm	3.5mm	1,500 lbs. @ 60 rpm	1,950 lbs. @ 60 rpm	Lubricated	SAE 20 Oil	-75° to 300°	FDA Compliant 21 CFR 178.3570	00000000	00000

High-Load Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications. They withstand greater weight and shock loads than standard bearings, but operate at lower speeds.

For technical drawings and 3-D models, click on a part number.

863 Bearing Bronze Bearings
For Housing ID, mm	Length, mm	Flange OD, mm	Flange Thickness, mm	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
22 mm Shaft Dia.
29	18	36	3.5	1,550 lbs. @ 60 rpm	1,550 lbs. @ 60 rpm	Lubricated	ISO 460 Oil	-60° to 300°	00000000	000000
29	22	36	3.5	1,900 lbs. @ 60 rpm	1,550 lbs. @ 60 rpm	Lubricated	ISO 460 Oil	-60° to 300°	00000000	00000

Ultra-Low-Friction Dry-Running Flanged Sleeve Bearings

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

PTFE bearings have good chemical resistance.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

PTFE Plastic Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Color	Temperature Range, °F	Specifications Met		Each
For 22 mm Shaft Dia.
29mm	22mm	36mm	3.5mm	55 lbs. @ 60 rpm	44 lbs. @ 60 rpm	White	-200° to 450°	FDA Compliant 21 CFR 177.1550	00000000	000000

Water-Resistant Dry-Running Flanged Sleeve Bearings

Good for underwater applications, these bearings won’t swell or warp when wet.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric Rulon LR Plastic Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Color	Temperature Range, °F		Each
For 22mm Shaft Dia.
29mm	22mm	36mm	3.5mm	550 lbs. @ 60 rpm	440 lbs. @ 60 rpm	Maroon	-400° to 500°	00000000	000000

Multipurpose Flanged Sleeve Bearings

These leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 932 bronze bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 660 Leaded Bronze Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Temperature Range, °F	PV Max.		Each
For 22mm Shaft Dia.
29mm	18mm	36mm	3mm	2,450 lbs. @ 60 rpm	3,300 lbs. @ 60 rpm	Required	-350° to 450°	__	00000000	000000
29mm	22mm	36mm	3.5mm	3,000 lbs. @ 60 rpm	3,300 lbs. @ 60 rpm	Required	-350° to 450°	75,000	00000000	00000
29mm	25mm	36mm	3mm	3,400 lbs. @ 60 rpm	3,300 lbs. @ 60 rpm	Required	-350° to 450°	__	00000000	00000