Filter by
For Load Direction
DFARS Compliance
Enclosure Rating
Food Industry Standard
About Ball and Roller Bearings
More
Washdown Set Screw Collar Ball Bearings
With Retaining Ring
Secure these bearings in washdown areas, such as food, beverage, pharmaceutical, and chemical plants, by tightening the set screw onto a shaft—no additional collar needed. Similar to 304 stainless steel, the nickel-coated steel rings on these bearings won’t break down from water. The extended inner ring increases shaft support. All of these bearings have NSF registered H1 lubrication, which is certified for incidental contact with food.
For technical drawings and 3-D models, click on a part number.
Inner Ring | Retaining Ring | Radial Load Cap., lbs. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | For Housing ID | Wd. | OD | Wd. | OD | Thick. | Seal Type | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Environmental Rating | Each | |
Nickel-Coated Steel Ring | ||||||||||||||||
| 1 1/2" | 3.15" | 1 3/32" | 2.82813" | 1.9375" | 3.40625" | 0.0625" | Sealed | 7,300 | 4,450 | 1,750 | Lubricated | -20 to 220 | ABEC-1 | IP69K | 0000000 | 0000000 |