3 5/16" Housing ID Bearings | McMaster-Carr

Filter by

System of Measurement

Shaft Diameter

Bearing Seal Type

Ball Bearing Profile

OD

ID

For Load Direction

Shaft Mount Type

Width

Inner Ring Type

Bearing Construction

Bearing Type

Ball Material

Lubrication

Dynamic Radial Load Capacity

Less than 10,000 lb.

Maximum Rotation Speed

Cage Material

Bearing Trade Number

For Housing ID

0.3124" to 0.3130"

0.3749" to 0.3755"

0.3750" to 0.3755"

0.3755" to 0.3764"

0.3760" to 0.3770"

0.4999" to 0.5005"

0.5000" to 0.5005"

0.5000" to 0.5007"

0.5000" to 0.5010"

0.5006" to 0.5017"

0.6250" to 0.6255"

0.6250" to 0.6257"

0.6256" to 0.6267"

0.8740" to 0.8760"

0.8750" to 0.8755"

0.8750" to 0.8758"

0.8758" to 0.8771"

1.1250" to 1.1255"

1.1250" to 1.1258"

1.1258" to 1.1271"

1.2490" to 1.2510"

1.2500" to 1.2505"

1.2500" to 1.2510"

1.2510" to 1.2525"

1.5615" to 1.5635"

1.5625" to 1.5630"

1.5625" to 1.5635"

1.5635" to 1.5650"

2.0000" to 2.0008"

2.0000" to 2.0010"

2.0000" to 2.0012"

2.0012" to 2.0030"

2.3750" to 2.3760"

2.3750" to 2.3762"

2.3762" to 2.3780"

3.0000" to 3.0010"

3.0000" to 3.0012"

3.0012" to 3.0030"

3.7500" to 3.7510"

7.000 mm to 7.015 mm

8.000 mm to 8.015 mm

10.000 mm to 10.018 mm

12.000 mm to 12.018 mm

12.016 mm to 12.043 mm

15.000 mm to 15.018 mm

16.000 mm to 16.015 mm

16.000 mm to 16.018 mm

16.000 mm to 16.035 mm

16.016 mm to 16.043 mm

17.000 mm to 17.018 mm

19.000 mm to 19.021 mm

21.000 mm to 21.021 mm

22.000 mm to 22.021 mm

22.000 mm to 22.018 mm

22.000 mm to 22.026 mm

22.020 mm to 22.053 mm

23.000 mm to 23.021 mm

24.000 mm to 24.021 mm

26.000 mm to 26.021 mm

26.000 mm to 26.018 mm

26.000 mm to 26.026 mm

26.003 mm to 26.033 mm

26.020 mm to 26.053 mm

28.000 mm to 28.021 mm

32.000 mm to 32.025 mm

32.000 mm to 32.030 mm

32.004 mm to 32.037 mm

32.025 mm to 32.064 mm

35.000 mm to 35.025 mm

40.000 mm to 40.025 mm

40.000 mm to 40.021 mm

40.000 mm to 40.030 mm

40.004 mm to 40.037 mm

40.025 mm to 40.064 mm

45.000 mm to 45.025 mm

47.000 mm to 47.021 mm

47.000 mm to 47.025 mm

47.000 mm to 47.030 mm

47.004 mm to 47.037 mm

47.025 mm to 47.064 mm

52.000 mm to 52.030 mm

60.000 mm to 60.030 mm

62.000 mm to 62.023 mm

62.000 mm to 62.025 mm

62.000 mm to 62.030 mm

62.005 mm to 62.044 mm

75.000 mm to 75.030 mm

90.000 mm to 90.035 mm

Shaft Type

DFARS Specialty Metals

Material

841 Bearing Bronze

Lubricant

Export Control Classification Number (ECCN)

REACH

RoHS

How can we improve?

7 Products

Light Duty Ball Bearings

Image of Product. Front orientation. Ball Bearings. Light Duty Ball Bearings, Open.

Open

Image of Product. Front orientation. Ball Bearings. Light Duty Ball Bearings, Shielded.

Shielded

Image of Product. Front orientation. Ball Bearings. Light Duty Ball Bearings, Sealed.

Sealed

Reduce friction between rotating parts that don’t require high speed or precision, such as the shafts in hand cranks and casters.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Shielded—The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

							Temp. Range, ° F
	For Shaft Dia.	For Housing ID	Wd.	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	Inner Ring Type	Bearing Trade No.		Each
Open







				Steel

				1 1/2"	3 5/16"	13/16"	Not Rated	6,189	5,000	-20	250	Standard	1660	0000000	000000


				1 3/4"	3 5/16"	13/16"	Not Rated	6,189	5,000	-20	250	Standard	1662	0000000	00000


				Shielded







								Steel

								1 1/2"	3 5/16"	13/16"	Not Rated	6,189	5,000	-20	250	Standard	1660-2Z	0000000	00000


								1 3/4"	3 5/16"	13/16"	Not Rated	6,189	5,000	-20	250	Standard	1662-2Z	0000000	00000


								Sealed







												Steel

												1 1/2"	3 5/16"	13/16"	Not Rated	6,189	5,000	-20	250	Standard	1660-2RS	0000000	00000


												1 3/4"	3 5/16"	13/16"	Not Rated	6,189	5,000	-20	250	Standard	1662-2RS	0000000	00000

Oil-Embedded Sleeve Bearings

Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.

	For Shaft Dia.	For Housing ID	Lg.	Dynamic Radial Load Cap. @ Speed	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



		2 15/16"	3 5/16"	3"	17,600 lb. @ 30 rpm	Synthetic Oil	-35 to 300	00000000	000000

back to top

The quick brown fox jumped over the lazy dog. Pedestal (35" Ht. x 4" Wd. x 4" Dp.)