System of Measurement System of Measurement |
---|
|
Bearing Trade Number Bearing Trade Number |
---|

For Housing ID For Housing ID | Show |
---|
|
For Housing ID For Housing ID | Hide |
---|
Ball Bearing Type Ball Bearing Type |
---|
![]() | ![]() | ![]() |
Standard | Flanged | With Retaining Ring |
Ring Material Ring Material |
---|
|
For Load Direction For Load Direction |
---|
![]() | Radial |
![]() | Combined Radial and Thrust |
Maximum Speed Maximum Speed |
---|
Cage Material Cage Material |
---|
|
Construction Construction |
---|
|
Lubrication Lubrication |
---|
|
Inner Ring Type Inner Ring Type |
---|
![]() | Standard |
For Shaft Type For Shaft Type |
---|
![]() | Round |
Ball Material Ball Material |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
About Plain Bearings
More
About Ball and Roller Bearings
More
Ball Bearings
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
Bearings with retaining ring have a removable retaining ring that holds the bearing inside a housing.
For technical drawings and 3-D models, click on a part number.

Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
6003 | 17mm | 35mm | 10mm | Steel | 1,300 | 730 | 28,000 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 00000 |
6202 | 15mm | 35mm | 11mm | Steel | 1,750 | 840 | 26,000 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 0000 |

Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
6003-2Z | 17mm | 35mm | 10mm | Steel | 1,300 | 730 | 22,000 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 00000 |
6202-2Z | 15mm | 35mm | 11mm | Steel | 1,750 | 840 | 20,000 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 0000 |
6300-2Z | 10mm | 35mm | 11mm | Steel | 1,900 | 760 | 26,000 | Lubricated | -20° to 230° | ABEC-3 | __ | 0000000 | 00000 |
16003-2Z | 17mm | 35mm | 8mm | Steel | 1,400 | 730 | 31,000 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 00000 |


Retaining
Ring
Retaining Ring, mm | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
6202-2Z | 15mm | 35mm | 11mm | 39.7 | 1.12 | Steel | 1,800 | 840 | 22,000 | Lubricated | -20° to 230° | ABEC-1 | 0000000 | 000000 |

Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
6003-2RS | 17mm | 35mm | 10mm | Steel | 1,300 | 730 | 11,800 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 0000000 | 000000 |
6202-2RS | 15mm | 35mm | 11mm | Steel | 1,750 | 840 | 12,700 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 0000 |
62202-2RS | 15mm | 35mm | 14mm | Steel | 1,800 | 840 | 14,000 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 00000 |
6300-2RS | 10mm | 35mm | 11mm | Steel | 1,900 | 760 | 15,000 | Lubricated | -20° to 210° | ABEC-3 | __ | 00000000 | 00000 |


Retaining
Ring
Retaining Ring, mm | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
6003-2RS | 17mm | 35mm | 10mm | 39.7 | 1.12 | Steel | 1,400 | 730 | 13,000 | Lubricated | -40° to 210° | ABEC-1 | 0000000 | 000000 |
6202-2RS | 15mm | 35mm | 11mm | 39.7 | 1.12 | Steel | 1,800 | 840 | 13,000 | Lubricated | -40° to 210° | ABEC-1 | 0000000 | 00000 |
Permanently Lubricated Ball Bearings

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
6003 | 17mm | 35mm | 10mm | Steel | 1,100 | 590 | 11,500 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 000000 |
6202 | 15mm | 35mm | 11mm | Steel | 1,450 | 770 | 12,000 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 00000 |
Sealed | ||||||||||||
6003-2RS | 17mm | 35mm | 10mm | Steel | 1,100 | 590 | 11,500 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 00000 |
6202-2RS | 15mm | 35mm | 11mm | Steel | 1,450 | 770 | 12,000 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 00000 |
6300-2RS | 10mm | 35mm | 11mm | Steel | 1,400 | 820 | 13,000 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 00000 |
Precision Ball Bearings


For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.
Shielded bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust and other contaminants better than shielded bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Shielded | ||||||||||||
6003-2Z | 17 | 35 | 10 | Steel | 1,400 | 730 | 22,000 | Lubricated | -30° to 240° | ABEC-3 | 0000000 | 000000 |
6202-2Z | 15 | 35 | 11 | Steel | 1,800 | 840 | 22,000 | Lubricated | -30° to 240° | ABEC-3 | 0000000 | 00000 |
Sealed | ||||||||||||
6003-2RS | 17 | 35 | 10 | Steel | 1,400 | 730 | 13,000 | Lubricated | -30° to 210° | ABEC-3 | 0000000 | 00000 |
6202-2RS | 15 | 35 | 11 | Steel | 1,800 | 840 | 13,000 | Lubricated | -30° to 210° | ABEC-3 | 00000000 | 00000 |
Self-Aligning Ball Bearings


With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.
Open bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust and other contaminants better than open bearings, but retain more heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Misalignment Capability | Temp. Range, °F | ABEC Rating | Each | |
Open | |||||||||||||
1202 | 15 | 35 | 11 | Steel | 1,700 | 390 | 18,000 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 000000 |
2202 | 15 | 35 | 14 | Steel | 1,950 | 450 | 26,000 | Lubricated | 2.5° | -30° to 210° | ABEC-1 | 0000000 | 00000 |
2300 | 10 | 35 | 17 | Steel | 2,050 | 450 | 18,000 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 00000 |
Sealed | |||||||||||||
2202-2RS | 15 | 35 | 14 | Steel | 1,650 | 390 | 14,000 | Lubricated | 1.5° | -30° to 210° | ABEC-1 | 0000000 | 000000 |
One-Way Locking Ball Bearing Clutches


Internal locking elements (sprags) lock to transmit torque in one direction while turning freely in the other direction. Use them in applications where precision movement is required, such as pick-and-place and automated indexing conveyor systems. Shields keep out dust and contaminants.
Shielded bearings dissipate heat better than sealed bearings, but don’t keep out as much dust.
For dirty or dusty environments, sealed bearings are the best choice, since they block out contaminants better than shielded bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Max. Torque, ft.-lbs. | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Shielded | |||||||||||||
FZ 6202 | 15 | 35 | 11 | Steel | 1,160 | 540 | 9,400 | 15 | Lubricated | -40° to 170° | ABEC-1 | 0000000 | 0000000 |
Sealed | |||||||||||||
FZ 6202 2RS | 15 | 35 | 16 | Steel | 1,160 | 540 | 8,400 | 15 | Lubricated | -40° to 170° | ABEC-1 | 0000000 | 000000 |
Stainless Steel Ball Bearings
Bearings are 440C stainless steel for good corrosion resistance.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.

Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
6202 | 15mm | 35mm | 11mm | 440C Stainless Steel | 1,150 | 770 | 20,000 | Lubricated | -40° to 240° | ABEC-1 | 00000000 | 000000 |
6003 | 17mm | 35mm | 10mm | 440C Stainless Steel | 1,100 | 580 | 24,000 | Lubricated | -40° to 240° | ABEC-1 | 00000000 | 00000 |

Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
6202-2Z | 15mm | 35mm | 11mm | 440C Stainless Steel | 1,150 | 770 | 20,000 | Lubricated | -40° to 240° | ABEC-1 | 0000000 | 000000 |
6003-2Z | 17mm | 35mm | 10mm | 440C Stainless Steel | 1,100 | 580 | 20,000 | Lubricated | -40° to 240° | ABEC-1 | 00000000 | 00000 |
6300-2Z | 10mm | 35mm | 11mm | 440C Stainless Steel | 1,500 | 610 | 23,000 | Lubricated | -40° to 240° | ABEC-1 | 00000000 | 00000 |

Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
6202-2RS | 15mm | 35mm | 11mm | 440C Stainless Steel | 1,450 | 770 | 20,000 | Lubricated | -40° to 240° | ABEC-1 | 0000000 | 000000 |
Permanently Lubricated Stainless Steel Ball Bearings

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. The solid lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
6003 | 17 | 35 | 10 | 440C Stainless Steel | 1,180 | 680 | 11,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 000000 |
6202 | 15 | 35 | 11 | 440C Stainless Steel | 1,300 | 770 | 12,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
6300 | 10 | 35 | 11 | 440C Stainless Steel | 1,400 | 820 | 13,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
Sealed | ||||||||||||
6003-2RS | 17 | 35 | 10 | 440C Stainless Steel | 1,150 | 680 | 11,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
6202-2RS | 15 | 35 | 11 | 440C Stainless Steel | 1,300 | 770 | 12,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
6300-2RS | 10 | 35 | 11 | 440C Stainless Steel | 1,400 | 820 | 13,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
Food Industry Permanently Lubricated Stainless Steel Ball Bearings

Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and ring that eliminates the need for additional lubrication. The solid lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
Sealed | |||||||||||||
6003-2RS | 17 | 35 | 10 | 440C Stainless Steel | 1,100 | 580 | 11,000 | Lubricated | -40° to 200° | ABEC-1 | FDA Compliant 21 CFR 178.3570 | 00000000 | 000000 |
6202-2RS | 15 | 35 | 11 | 440C Stainless Steel | 1,450 | 670 | 12,000 | Lubricated | -40° to 200° | ABEC-1 | FDA Compliant 21 CFR 178.3570 | 00000000 | 00000 |
6300-2RS | 10 | 35 | 11 | 440C Stainless Steel | 1,500 | 610 | 13,000 | Lubricated | -40° to 200° | ABEC-1 | FDA Compliant 21 CFR 178.3570 | 00000000 | 00000 |
Ultra-Corrosion-Resistant Stainless Steel Ball Bearings

These 316 stainless steel bearings are more corrosion resistant than our other stainless steel bearings, but they have a lower load capacity.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
6003 | 17mm | 35mm | 10mm | 316 Stainless Steel | 200 | 130 | 1,000 | Required | -40° to 140° | Not Rated | 0000000 | 000000 |
6202 | 15mm | 35mm | 11mm | 316 Stainless Steel | 200 | 160 | 1,000 | Required | -40° to 140° | Not Rated | 0000000 | 00000 |
Plastic Ball Bearings

These acetal bearings have good all-around corrosion and chemical resistance.
316 stainless steel balls have excellent corrosion resistance.
Glass balls have even more corrosion resistance than stainless steel balls.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
316 Stainless Steel Ball | ||||||||||||
Open | ||||||||||||
6003 | 17mm | 35mm | 10mm | Acetal Plastic | 69 | 46 | 1,069 | Not Required | -40° to 180° | Not Rated | 00000000 | 00000 |
6202 | 15mm | 35mm | 11mm | Acetal Plastic | 65 | 45 | 1,000 | Not Required | -40° to 180° | Not Rated | 0000000 | 00000 |
16003 | 17mm | 35mm | 8mm | Acetal Plastic | 69 | 46 | 1,069 | Not Required | -40° to 180° | Not Rated | 00000000 | 00000 |
Glass Ball | ||||||||||||
Open | ||||||||||||
6202 | 15mm | 35mm | 11mm | Acetal Plastic | 69 | 46 | 1,069 | Not Required | -40° to 180° | Not Rated | 00000000 | 00000 |
High-Load Plastic Ball Bearings

With two rows of balls, these lightweight bearings have greater durability and load capacity—and a wider profile—than single-row plastic bearings. They’re commonly used in bottle-filling machines and other food-processing applications. The acetal body doesn’t absorb water, so it can operate in liquids or be washed down without losing strength. The balls are made of either glass or 316 stainless steel—both materials are corrosion resistant. Since there’s no metal-on-metal contact between the balls and the body, these bearings don’t require lubrication.
For technical drawings and 3-D models, click on a part number.
Radial Load Capacity, lbs. | 316 Stainless Steel Balls | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Diameter | For Housing ID | Width | Ring Material | Dynamic | Static | Maximum Speed, rpm | Lubrication | Temperature Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
A5202-6 | 15mm | 35mm | 16mm | Acetal Plastic | 85 | 65 | 800 | Not Required | -40° to 180° | Not Rated | 00000000 | 000000 |
Lubrication-Free Plastic Flanged Ball Bearings


Install these acetal bearings in caustic environments and where lubrication can’t be used. They have good all-around corrosion and chemical resistance. The flange ensures proper positioning inside a tube or housing.
For technical drawings and 3-D models, click on a part number.
Flange | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Shielded | ||||||||||||||
6000 | 10mm | 35mm | 9mm | 38mm | 2mm | Acetal Plastic | 25 | 20 | 1,900 | Not Required | -40° to 175° | Not Rated | 00000000 | 000000 |
6001 | 12mm | 35mm | 9mm | 38mm | 2mm | Acetal Plastic | 30 | 25 | 1,700 | Not Required | -40° to 175° | Not Rated | 00000000 | 00000 |
Angular-Contact Thrust Ball Bearings



Install these bearings for use with combined radial and thrust loads. They are often used in spindle applications and can be combined with cylindrical roller bearings to better handle radial loads.
Single-row bearings handle thrust loads on one side. For applications with thrust loads on both sides, mount them in pairs.
Double-row bearings handle thrust loads in both directions.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Combined Load Cap., lbs. | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Contact Angle | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
Single Row | ||||||||||||||
Open | ||||||||||||||
7003 | 17 | 35 | 10 | Steel | 1,500 | 710 | 50,000 | Required | 15° | -30° to 140° | ABEC-7 | __ | 0000000 | 0000000 |
7202 | 15 | 35 | 11 | Steel | 1,850 | 980 | 24,000 | Required | 40° | -20° to 230° | ABEC-3 | __ | 0000000 | 00000 |
Sealed | ||||||||||||||
7202-2RS | 15 | 35 | 11 | Steel | 1,850 | 1,000 | 24,000 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
Double Row | ||||||||||||||
Open | ||||||||||||||
3202 | 15 | 35 | 15.9 | Steel | 2,500 | 1,500 | 17,000 | Required | 30° | -20° to 230° | ABEC-1 | __ | 00000000 | 00000 |
Shielded | ||||||||||||||
3202-2Z | 15 | 35 | 15.9 | Steel | 2,500 | 1,500 | 18,000 | Lubricated | 30° | -20° to 230° | ABEC-1 | __ | 00000000 | 00000 |
Sealed | ||||||||||||||
3202-2RS | 15 | 35 | 15.9 | Steel | 2,500 | 1,500 | 14,000 | Lubricated | 30° | -20° to 230° | ABEC-1 | __ | 00000000 | 00000 |
Oil-Embedded Sleeve Bearings

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 25 mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
35 | 25 | 1,900 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 000000 |
35 | 30 | 2,300 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
35 | 35 | 2,700 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
35 | 50 | 3,750 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
For 30 mm Shaft Dia. | |||||||
35 | 25 | 2,300 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
35 | 30 | 2,700 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
High-Load Oil-Embedded Sleeve Bearings

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 25mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
35mm | 25mm | 2,150 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 000000 |
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 25mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
35mm | 25mm | 4,650 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 510° | 00000000 | 000000 |
High-Load Food Industry Oil-Embedded Sleeve Bearings

Embedded with oil that is safe for incidental contact with food, these bearings are suitable for use in high-load applications such as bottling and filling lines in food processing plants. They are also known as Super Oilite® bearings. Startup friction releases the embedded oil onto their surface in a thin layer. Bearings are made of 863 iron-copper, which makes these bearings strong and resistant to shock loads.
Bearings with NSF H1 registered lubrication comply with NSF standards for incidental contact with food.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Length | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
863 Iron-Copper | ||||||||
---|---|---|---|---|---|---|---|---|
For 25mm Shaft Dia. | ||||||||
35mm | 35mm | 3,050 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | ASTM B439, NSF Registered H1 | 00000000 | 000000 |
High-Load Dry-Running Sleeve Bearings

Bearings with
6061 Aluminum Shell
A metal shell adds strength.
Frelon bearings with 6061 aluminum shell reduce vibration and are chemically inert.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Light Duty Dry-Running Sleeve Bearings

Use where high loads and speeds are not required.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Metric Nylon Bearings | ||||||
---|---|---|---|---|---|---|
For 25mm Shaft Dia. | ||||||
35mm | 30mm | 185 lbs. @ 60 rpm | Off-White | -10° to 220° | 00000000 | 000000 |
For 30mm Shaft Dia. | ||||||
35mm | 25mm | 310 lbs. @ 30 rpm | Off-White | -10° to 220° | 00000000 | 00000 |
35mm | 30mm | 370 lbs. @ 30 rpm | Off-White | -10° to 220° | 00000000 | 00000 |
High-Temperature Dry-Running Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
660 leaded bronze bearings are cast, making them strong, wear resistant, and excellent at handling shock loads. They are sometimes called 932 bronze bearings.
Grooved bearings have a graphite-filled groove on the inside of the bearing that distributes lubricant evenly along the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.

For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication Method | Temperature Range, °F | Each | |
Metric 660 Leaded Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 25mm Shaft Dia. | ||||||
35mm | 50mm | 6,750 lbs. @ 60 rpm | Grooved | -350° to 450° | 00000000 | 000000 |
Multipurpose Sleeve Bearings

These 660 leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 932 bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
Metric 660 Leaded Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 25mm Shaft Dia. | ||||||
35mm | 25mm | 3,850 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 000000 |
35mm | 40mm | 6,200 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 00000 |
35mm | 100mm | 1,550 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 00000 |
For 28mm Shaft Dia. | ||||||
35mm | 25mm | 4,300 lbs. @ 30 rpm | Required | -350° to 450° | 00000000 | 00000 |
35mm | 40mm | 6,900 lbs. @ 30 rpm | Required | -350° to 450° | 00000000 | 00000 |
Multipurpose Sleeve Bearings with Groove

A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface. Bearings are cast bronze, making them strong, wear resistant, and excellent at handling shock loads. 660 leaded bronze is sometimes called 932 bronze.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Corrosion-Resistant Sleeve Bearings

The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
Metric 954 Aluminum-Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 28mm Shaft Dia. | ||||||
35mm | 100mm | 62,650 lbs. @ 30 rpm | Required | -350° to 500° | 00000000 | 000000 |
Needle-Roller Bearings

Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together. Bearings take on the shape of their housing and may be oblong prior to installation.
Open bearings dissipate heat more efficiently than sealed bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | For Shaft Surface Smoothness (Ra), microinch | Temp. Range, °F | Specifications Met | Each | |
Open | ||||||||||||
28mm | 35mm | 16mm | Steel | 3,650 | 5,950 | 9,200 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 0000000 | 000000 |
28mm | 35mm | 20mm | Steel | 4,650 | 8,050 | 9,200 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |