System of Measurement System of Measurement |
|---|
|
For Housing ID For Housing ID | Show |
|---|
|
For Housing ID For Housing ID | Hide |
|---|
Ring Material Ring Material |
|---|
|
Ball Bearing Type Ball Bearing Type |
|---|
 | Standard |
Cage Material Cage Material |
|---|
|
Dynamic Radial Load Capacity Dynamic Radial Load Capacity |
|---|
|
Ball Material Ball Material |
|---|
|
For Load Direction For Load Direction |
|---|
 | Radial |
 | Combined Radial and Thrust |
For Shaft Type For Shaft Type |
|---|
 | Round |
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
About Plain Bearings
More
About Ball and Roller Bearings
More
Permanently Lubricated Stainless Steel Ball Bearings
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. The solid lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number  | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
| 6707 | 35 | 44 | 5 | 440C Stainless Steel | 410 | 360 | 7,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 000000 |
Sealed | ||||||||||||
| 6707-2RS | 35 | 44 | 5 | 440C Stainless Steel | 410 | 360 | 7,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
Ultra-Thin Ball Bearings
These bearings have twice as many contact points as angular-contact ball bearings. Fit onto large-diameter hollow shafts to run air and hydraulic lines, electrical wiring, and other components through moving parts in assemblies such as index and rotary tables, packaging equipment, and robotics.
440 stainless steel bearings are more corrosion resistant than steel bearings.
Open bearings dissipate heat more efficiently than shielded bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | Thrust Load Cap., lbs. | Moment Load Cap., ft.-lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | For Housing ID | Wd. | Dynamic | Static | Dynamic | Static | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Steel Ring | ||||||||||||||
Open | ||||||||||||||
| 35mm | 44mm | 5mm | 410 | 360 | Not Rated | Not Rated | Not Rated | Not Rated | 6,000 | Lubricated | -50° to 130° | ABEC-1 | 00000000 | 000000 |
440 Stainless Steel Ring | ||||||||||||||
Open | ||||||||||||||
| 35mm | 44mm | 5mm | 410 | 360 | Not Rated | Not Rated | Not Rated | Not Rated | 6,000 | Lubricated | -50° to 130° | ABEC-1 | 00000000 | 00000 |
Oil-Embedded Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Food Industry Dry-Running Sleeve Bearings
Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.
Acetal bearings are FDA compliant for direct contact with food. They’re also bright blue, making them easy to spot if they fall into your line.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
Metric Acetal Plastic Bearings | |||||||
|---|---|---|---|---|---|---|---|
For 40mm Shaft Dia. | |||||||
| 44mm | 20mm | 16 lbs. @ 30 rpm | Blue | -50° to 190° | FDA Compliant 21 CFR 177.1550 | 00000000 | 00000 |
Light Duty Dry-Running Flanged Sleeve Bearings
Use where high loads and speeds are not required.
Thermoplastic-blend bearings have low moisture absorption and create very low friction in applications with light loads, and frequent starts and stops.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Thermoplastic-Blend Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 40mm Shaft Dia. | |||||||||
| 44mm | 20mm | 52mm | 2mm | 970 lbs. @ 30 rpm | 810 lbs. @ 30 rpm | Yellow | -50° to 190° | 00000000 | 000000 |
| 44mm | 40mm | 52mm | 2mm | 1,900 lbs. @ 30 rpm | 810 lbs. @ 30 rpm | Yellow | -50° to 190° | 00000000 | 00000 |
Food Industry Dry-Running Flanged Sleeve Bearings
Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.
Acetal bearings are FDA compliant for direct contact with food. They’re commonly used on machines in food plants and manufacturing plants for packaging and healthcare equipment. These bearings are bright blue, so they’re easy to spot in your line in case of breakage.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
Acetal Plastic Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 40mm Shaft Dia. | ||||||||||
| 44mm | 30mm | 52mm | 2mm | 1,300 lbs. @ 30 rpm | 1,500 lbs. @ 30 rpm | Blue | -50° to 190° | FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297 | 000000000 | 00000 |
| 44mm | 40mm | 52mm | 2mm | 1,750 lbs. @ 30 rpm | 1,500 lbs. @ 30 rpm | Blue | -50° to 190° | FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297 | 000000000 | 0000 |