Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 841 Bearing Bronze Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 45mm Shaft Dia.
51mm	25mm	57mm	3mm	3,450 lbs. @ 30 rpm	2,950 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	000000
51mm	32mm	57mm	3mm	4,450 lbs. @ 30 rpm	2,950 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000

High-Load Oil-Embedded Flanged Sleeve Bearings

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

863 Bearing Bronze Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 45mm Shaft Dia.
51mm	25mm	57mm	3mm	4,350 lbs. @ 30 rpm	2,950 lbs. @ 30 rpm	Lubricated	ISO 460 Oil	-15° to 300°	00000000	000000
51mm	32mm	57mm	3mm	5,600 lbs. @ 30 rpm	2,950 lbs. @ 30 rpm	Lubricated	ISO 460 Oil	-15° to 300°	00000000	00000

Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

841 Bronze Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 45mm Shaft Dia.
51mm	25mm	57mm	3mm	3,450 lbs. @ 30 rpm	2,950 lbs. @ 30 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	00000000	000000
51mm	32mm	57mm	3mm	4,450 lbs. @ 30 rpm	2,950 lbs. @ 30 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	00000000	00000

High-Load Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications. They withstand greater weight and shock loads than standard bearings, but operate at lower speeds.

For technical drawings and 3-D models, click on a part number.

863 Bearing Bronze Bearings
For Housing ID, mm	Length, mm	Flange OD, mm	Flange Thickness, mm	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
45 mm Shaft Dia.
51	25	57	3	4,350 lbs. @ 30 rpm	2,950 lbs. @ 30 rpm	Lubricated	ISO 460 Oil	-60° to 300°	00000000	000000
51	32	57	3	5,600 lbs. @ 30 rpm	2,950 lbs. @ 30 rpm	Lubricated	ISO 460 Oil	-60° to 300°	00000000	00000

High-Temperature Dry-Running Flanged Sleeve Bearings

SAE 660 Leaded Bronze

Graphite provides a layer of dry lubrication that operates in high-temperature environments.

660 leaded bronze bearings are cast, making them strong, wear resistant, and excellent at handling shock loads. They are sometimes called 932 bronze bearings. A filled groove on the inside of the bearing distributes the graphite evenly along the bearing’s surface.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

660 Leaded Bronze Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Temperature Range, °F		Each
For 45mm Shaft Dia.
51mm	32mm	57mm	3mm	Not Rated	Not Rated	-350° to 450°	00000000	000000

Water-Resistant Dry-Running Flanged Sleeve Bearings

Good for underwater applications, these bearings won’t swell or warp when wet.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric Rulon LR Plastic Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Color	Temperature Range, °F		Each
For 45mm Shaft Dia.
51mm	25mm	57mm	3mm	620 lbs. @ 60 rpm	420 lbs. @ 60 rpm	Maroon	-400° to 500°	00000000	000000
51mm	32mm	57mm	3mm	1,600 lbs. @ 30 rpm	840 lbs. @ 30 rpm	Maroon	-400° to 500°	00000000	00000

Chemical-Resistant Dry-Running Flanged Sleeve Bearings

These bearings stand up to a wider range of chemicals than other dry-running flanged sleeve bearings. They are lightweight and strong.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

PEEK Plastic Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Color	Temperature Range, °F		Each
For 45 mm Shaft Dia.
51mm	25mm	57mm	3mm	1,750 lbs. @ 30 rpm	1,150 lbs. @ 30 rpm	Beige	-20° to 450°	00000000	000000
51mm	32mm	57mm	3mm	2,200 lbs. @ 30 rpm	1,150 lbs. @ 30 rpm	Beige	-20° to 450°	00000000	00000

Multipurpose Flanged Sleeve Bearings

These leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 932 bronze bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 660 Leaded Bronze Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Temperature Range, °F	PV Max.		Each
For 45mm Shaft Dia.
51mm	25mm	57mm	3mm	6,950 lbs. @ 30 rpm	5,950 lbs. @ 30 rpm	Required	-350° to 450°	75,000	00000000	000000
51mm	28mm	57mm	3mm	7,800 lbs. @ 30 rpm	5,950 lbs. @ 30 rpm	Required	-350° to 450°	__	00000000	00000
51mm	32mm	57mm	3mm	8,900 lbs. @ 30 rpm	5,950 lbs. @ 30 rpm	Required	-350° to 450°	75,000	0000000	00000
51mm	45mm	57mm	3mm	12,250 lbs. @ 30 rpm	5,950 lbs. @ 30 rpm	Required	-350° to 450°	__	00000000	00000

Crossed-Roller Bearings

With a considerably larger ID than our Face-Mount Crossed-Roller Bearings, use these to run hydraulic lines, electrical wiring, and other components through the inside of the bearing. The rollers face in alternating directions to allow for rigid, accurate motion under any combination of radial, thrust, and moment (twisting) loads. Use in applications where highly accurate motion is necessary, such as machine tools and industrial robots.

Open bearings dissipate heat more efficiently than sealed bearings.

For technical drawings and 3-D models, click on a part number.

				Combined Load Cap., lbs.
For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	Temp. Range, °F		Each
Open
40	51	5	Steel	440	560	1,600	Required	0° to 230°	0000000	0000000