A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.

Use these bearings where high speed and precision are not required.

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Bearings are 440C stainless steel.

These 316 stainless steel bearings are more corrosion resistant than our other stainless steel bearings, but they have a lower load capacity.

With two rows of balls, these lightweight bearings have greater durability and load capacity—and a wider profile—than single-row plastic bearings.

These PEEK bearings operate in temperatures almost twice as high as our other plastic ball bearings.

Install these acetal bearings in caustic environments and where lubrication can’t be used. They have good all-around corrosion and chemical resistance.

A combination of stainless steel and nylon components provide increased corrosion resistance over standard thrust ball bearings.

Use these bearings as miniature high-precision turntables. They have a unique design that allows your shaft to sit on top of the bearing rather than being inserted through it.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

With a flexible layer of rubber sandwiched between an oil-embedded bronze bearing and rigid metal shell, these bearings reduce wear and machinery noise.

The oil in these bearings is suitable for incidental contact with food.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

Graphite provides a layer of dry lubrication that can operate in high-temperature environments.

These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.

Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings.

Even in the presence of harsh chemicals and extreme temperatures, these bearings operate under heavy loads and at high speeds.

A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface.

Grooves on the inside of the bearing provide a flow path for lubricant, distributing it evenly along the bearing’s surface.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

The oil in these bearings is suitable for incidental contact with food.

These bearings come with a traceable lot number and material test report. They are also known as Oilite® bearings.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.

An aluminum shell adds strength.

Good for underwater applications, these bearings won’t swell or warp when wet.

Compensating for minor shaft misalignment and not requiring lubrication, these sleeve bearings swivel to self-align and are dry running. They don’t need a housing and you can install and replace them without any tools because they’re slip fit.

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

The oil in these bearings is suitable for incidental contact with food.

Use where high loads and speeds are not required.

Graphite provides a layer of dry lubrication that operates in high-temperature environments.

Good for underwater applications, these bearings won’t swell or warp when wet.

These leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads.

Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together.

The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed. Also known as drawn-cup roller clutches.

Adapt needle-roller thrust bearings to use on unhardened, unground surfaces.

Designed with a thin, compact housing, these bearings are good for space-constrained applications.

Use these bearings in corrosive environments and under water.

Made from slippery materials, these bearings reduce friction without the oily mess.

Capable of handling temperatures from -400° to 750° F, these graphalloy bearings withstand the widest temperature range of any of our mounted bearings.

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface.

With a flexible layer of neoprene sandwiched between an oil-embedded bronze bearing and rigid steel shell, these bearings reduce wear and machinery noise.

Roller bearings have a thinner profile and larger contact area than ball bearings, making them stronger and more space-efficient than ball bearings.

Designed with a thin, compact housing, these bearings are good for space-constrained applications.

Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with two-bolt flange.

Use these nylon or acetal bearings for light loads. The closed backing blocks out dust and other contaminants.

Handling speeds twice as fast as standard mounted sleeve bearings while limiting wear on your system, these bearings are made of PTFE-filled acetal.

These roller bearings handle extremely high speeds for their small size.

With no moving parts, sleeve bearings are better for dirty environments than ball and roller bearings.

The choice for low-friction motion in high-temperature environments.

Designed to handle heavy loads, these bearings have higher load capacities than comparable standard linear ball bearings.

Ridges on the inside of these bearings wipe away dust and debris as the bearing travels on a shaft.

Made of FDA-listed materials for use in food applications, these bearings also have excellent chemical and corrosion resistance.

Ball bearings create less friction than sleeve bearings, so they require less force to operate.

The choice for low-friction motion in high-temperature environments.

Made of FDA-listed materials for use in food applications, these bearings also have excellent chemical and corrosion resistance.

The shell, housing, and balls of these bearings are stainless steel for excellent corrosion resistance.

The Frelon liner on these bearings allows them to stand up to a wider range of chemicals than other flange-mounted linear sleeve bearings.

Designed to handle heavy loads, these bearings have the highest load capacities of any mounted linear ball bearings we offer.

Use the adjustment screw in the housing to tighten or loosen the snugness (also known as preload) of the bearing to your shaft.

Made from a single piece of slippery UHMW plastic, these bearings have no cracks or crevices so they’re easy to clean.

Float bearings on air for precise, frictionless movement. Unlike traditional bearings that can wear your shaft down, these bearings are suspended using pressurized air for linear and rotary motion.

Designed to handle heavy loads, these bearings have higher load capacities than comparable standard mounted linear ball bearings for support rail shafts.

Virtually maintenance free, these bearings have slippery, chemical-resistant liners that don't require added lubrication.

With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any shaft-mount track roller we offer.

The outer ring is built to handle higher speeds than standard shaft-mount track rollers.

Be prepared with shims in a variety of thicknesses. Also known as arbor spacers, these shims are notched to fit over keyed shafts.

Be prepared with shims in a variety of thicknesses. These shims are shaped to fit over D-profile shafts. Use them to precisely align, level, and adjust spacing.