These steel ball bearings handle higher loads than stainless steel and plastic bearings.

Slip these bearings onto a shaft and secure with the included set screws, no special tools required.

Also known as Oilite® bearings.

Graphite provides a layer of dry lubrication that can operate in high-temperature environments.

Also known as Oilite® bearings.

Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings.

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

Found anywhere from machine tool spindles to conveyor rollers, these bearings have a two-piece design that allows for adjustment.

These bearings have higher radial load capacity, speed, and accuracy than standard needle-roller bearings.

Adapt needle-roller thrust bearings to use on unhardened, unground surfaces.

Ball bearings operate with less friction than other bearings, so they can run at higher speeds.

These bearings have the highest speed ratings of any mounted ball bearing that we offer.

A strong steel housing allows these bearings to handle higher speeds than standard oil-embedded mounted sleeve bearings.

Ball bearings operate with less friction than other bearings, so you can run them at higher speeds.

Used in food, beverage, pharmaceutical, and chemical plants, these mounted ball bearings are IP69K certified for washdown environments and have a two-bolt flange for mounting.

Permanently lubricated and IP69K certified for washdown environments, these mounted ball bearings are useful for hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants. Mount them using their two-bolt flange.

Made to withstand frequent washdowns, these bearings are permanently lubricated, which means you’ll never have to add lubricant. Use them in hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants.

With all three mounting holes on one side, you can position the bearing above or below the mounting surface.

Insert these bushings into the bore of your sprocket for flush or recessed mounting.

A toothed slot lets these bushings contract for insertion into the bore of your sprocket or pulley and then expand for a snug fit.

Mount these hubless bushings flush into your sprocket or pulley for a slim profile with no protruding screws.