Made to tight tolerances, these 440C stainless steel bearings combine speed and accuracy with corrosion resistance.

Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and race that eliminates the need for additional lubrication.

These steel ball bearings handle higher loads than stainless steel and plastic bearings.

Made of slippery plastic, these bearings do not require lubrication and have excellent corrosion and chemical resistance.

These PEEK bearings operate in temperatures almost twice as high as our other plastic ball bearings.

No need to worry about precisely aligning these bearings—they swivel to compensate for up to 5° of shaft misalignment.

Install these acetal bearings in caustic environments and where lubrication can’t be used. They have good all-around corrosion and chemical resistance.

A combination of stainless steel and nylon components provide increased corrosion resistance over standard thrust ball bearings.

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

Unlike other sleeve bearings, these do not need to be fully inserted into a housing. Their unique shape creates a permanent, secure hold in thin panels.

Use where high loads and speeds are not required.

Graphite provides a layer of dry lubrication that can operate in high-temperature environments.

Good for underwater applications, these bearings won’t swell or warp when wet.

These bronze bearings are strong, wear resistant, and excellent at handling shock loads.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

These bronze bearings are strong, wear resistant, and excellent at handling shock loads.

The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed. Also known as drawn-cup roller clutches.

Use these nylon or acetal bearings for light loads. The closed backing blocks out dust and other contaminants.

These roller bearings handle extremely high speeds for their small size.