A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.

With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.

Internal locking elements (sprags) lock to transmit torque in one direction while turning freely in the other direction.

Bearings are 440C stainless steel for good corrosion resistance.

Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and race that eliminates the need for additional lubrication.

Quickly secure these bearings onto shafts with the clamp-on collar for a concentric, mar-free hold.

Install these bearings for use with combined radial and thrust loads. They are often used in spindle applications and can be combined with cylindrical roller bearings to better handle radial loads.

Steel balls and washers allow these bearings to handle higher loads than bearings with stainless steel components.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

Use where high loads and speeds are not required.

Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.

A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

Use where high loads and speeds are not required.

Graphite provides a layer of dry lubrication that operates in high-temperature environments.

These leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads.

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

The oil in these bearings is suitable for incidental contact with food.

Use where high loads and speeds are not required.

With a considerably larger ID than our Face-Mount Crossed-Roller Bearings, use these to run hydraulic lines, electrical wiring, and other components through the inside of the bearing.

A built-in thrust ball bearing reduces wear from adjacent shaft components, while the needle-roller bearing supports radial loads.

With cylindrical rollers to distribute load over a large surface area, these bearings are often used to support heavy loads at high speeds in applications such as power generation and metal recycling.

Adapt needle-roller thrust bearings to use on unhardened, unground surfaces.

Meeting IP69K for washdown environments, these mounted ball bearings are used in food, beverage, pharmaceutical, and chemical plants.

Ball bearings operate with less friction than other bearings, so you can run them at higher speeds.

The tapered rollers in these bearings support large shafts at high static loads.

Combine with threaded pipe to mount these bearings in a variety of positions without the need for a flat mounting surface.

The choice for low-friction motion in high-temperature environments.

Designed to handle heavy loads, these bearings have higher load capacities than comparable standard linear ball bearings.

Designed to handle heavy loads, these bearings have higher load capacities than comparable standard linear ball bearings for support rail shafts.

The flanged housing makes these bearings a good solution for vertical linear motion applications.

Choose ball bearings for debris-free environments and when speed is a necessity. They operate with less friction than sleeve bearings, so you can run them at higher speeds.

Virtually maintenance free, these bearings have slippery, chemical-resistant liners that don't require added lubrication.

Ready to mount on your linear motion spline shaft, these bearings come installed in a housing and have grooves that match up with the splines on your shaft.

With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any shaft-mount track roller we offer.