A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.

With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.

For use on tapered shafts and round shafts with adapter sleeves, these ball-bearings have a spherical raceway to compensate for shaft misalignment.

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Bearings are 440C stainless steel.

Slip these bearings onto a shaft and secure with the included set screws, no special tools required.

Designed to stand up to frequent washdowns, you can quickly secure these ball bearings onto shafts with the clamp-on collar in food, beverage, pharmaceutical, and chemical plants. The collar centers your shafts and secures them better than set screw ball bearings, which reduces vibration and noise.

These bearings have twice as many contact points as angular-contact ball bearings.

Steel balls and washers allow these bearings to handle higher loads than bearings with stainless steel components.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

Use these bearings for frequent starts and stops in high-load applications.

Graphite provides a layer of dry lubrication that can operate in high-temperature environments.

These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.

A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications.

Graphite provides a layer of dry lubrication that operates in high-temperature environments.

An aluminum shell adds strength.

These leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads.

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

With a considerably larger ID than our Face-Mount Crossed-Roller Bearings, use these to run hydraulic lines, electrical wiring, and other components through the inside of the bearing.

A built-in thrust ball bearing reduces wear from adjacent shaft components, while the needle-roller bearing supports radial loads.

Thinner rollers allow these bearings to fit in tighter spaces than tapered-roller thrust bearings.

Also known as tapped-base bearings, these ball bearings mount to surfaces from the bottom through threaded holes. Because of their narrow profile, they’re commonly used in tight-clearance spaces, including systems where multiple shafts are mounted close together.

Roller bearings have a thinner profile and larger contact area than ball bearings, making them stronger and more space-efficient than ball bearings.

A bolt in each corner makes for a secure, even hold.

The tapered rollers in these bearings support large shafts at high static loads.

Swap out worn inserts instead of replacing the entire mounted unit.

The choice for low-friction motion in high-temperature environments.

Because they usually do not require lubrication, linear sleeve bearings outperform linear ball bearings in dirty environments.

A ceramic coating makes high speeds as well as rapid acceleration and deceleration possible.

When clearance is a concern, choose these ultra-thin sleeve bearings.

Ball bearings create less friction than sleeve bearings, so they require less force to operate.

The choice for low-friction motion in high-temperature environments.

Made of FDA-listed materials for use in food applications, these bearings also have excellent chemical and corrosion resistance.

With a grooved inner diameter, these bearings are designed to work with splined shafts. Together, they transmit rotary power while allowing the bearing to move freely along the length of the shaft. All are for use where shaft misalignment is unlikely.

Choose ball bearings for debris-free environments and when speed is a necessity. They operate with less friction than sleeve bearings, so you can run them at higher speeds.

Use the adjustment screw in the housing to tighten or loosen the snugness (also known as preload) of the bearing to your shaft.

A ceramic coating makes high speeds as well as rapid acceleration and deceleration possible.

With two bearings mounted in a single housing, these bearings have load capacities more than 10 times as high as standard mounted linear sleeve bearings. A ceramic liner helps them achieve high speeds as well as rapid acceleration and deceleration.

Designed to handle heavy loads, these bearings have higher load capacities than comparable standard mounted linear ball bearings for support rail shafts.

Virtually maintenance free, these bearings have slippery, chemical-resistant liners that don't require added lubrication.

With two bearings mounted in one housing, these sleeve bearings withstand heavy loads. Use them on round support rail shafts for applications that require maximum rigidity.

A flanged housing with mounting holes connects these bearings directly to your system. They have a grooved inner diameter that's designed to work with spline shafts. Together, they transmit rotary power while allowing the bearing to move freely along the length of the shaft.