These steel ball bearings handle higher loads than stainless steel and plastic bearings.

Wider than our standard ball bearings, these rugged bearings are good for handling heavy loads at low speeds.

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Bearings are 440C stainless steel.

These 316 stainless steel bearings are more corrosion resistant than our other stainless steel bearings, but they have a lower load capacity.

Slip these bearings onto a shaft and secure with the included set screws, no special tools required.

In addition to handling higher loads than three-piece ball bearings, one-piece bearings are easier to handle. They have an outer band that holds the bearing together and acts as a shield against dust and other contaminants.

A combination of stainless steel and nylon components provide increased corrosion resistance over standard thrust ball bearings.

Also known as Oilite® bearings.

Unlike other sleeve bearings, these do not need to be fully inserted into a housing. Their unique shape creates a permanent, secure hold in thin panels.

Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

Good for underwater applications, these bearings won’t swell or warp when wet.

These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.

Grooves on the inside of the bearing provide a flow path for lubricant, distributing it evenly along the bearing’s surface.

Also known as Oilite® bearings.

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

A slit running along the length of these bearings allows you to quickly slip them into a housing—no tools required.

Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings.

Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.

Also known as Oilite® bearings.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together.

Adapt high-precision needle-roller bearings to use on unhardened, unground shafts.

Thinner rollers allow these bearings to fit in tighter spaces than tapered-roller thrust bearings.

Ball bearings operate with less friction than other bearings, so they can run at higher speeds.

These bearings have the highest speed ratings of any mounted ball bearing that we offer.

Use these UHMW bearings in wet, corrosive environments.

A strong steel housing allows these bearings to handle higher speeds than standard oil-embedded mounted sleeve bearings.

Ball bearings operate with less friction than other bearings, so you can run them at higher speeds.

Use these bearings in corrosive environments and under water.

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface.

With all three mounting holes on one side, you can position the bearing above or below the mounting surface.

The screw connections on these bushings easily mate to compatible quick-disconnect sprockets and pulleys.

The tapered barrel on these bushings is split on both sides, allowing them to contract more tightly around the shaft than quick-disconnect and taper-lock bushings.