A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.

With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.

Bearings are 440C stainless steel for good corrosion resistance.

Made to tight tolerances, these 440C stainless steel bearings combine speed and accuracy with corrosion resistance.

These 316 stainless steel bearings are more corrosion resistant than our other stainless steel bearings, but they have a lower load capacity.

The flange ensures proper positioning inside a tube or housing.

No need to worry about precisely aligning these bearings—they swivel to compensate for up to 5° of shaft misalignment.

A combination of stainless steel and nylon components provide increased corrosion resistance over standard thrust ball bearings.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

Unlike other sleeve bearings, these do not need to be fully inserted into a housing. Their unique shape creates a permanent, secure hold in thin panels.

The oil in these bearings is suitable for incidental contact with food.

A metal shell adds strength.

Use where high loads and speeds are not required.

These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.

Permanently and securely install these self-clinching bearings into panels, with no need for precision-bored holes or machined mounts.

A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications.

Support heavy loads that are often found in bottling and filling lines in food plants—these bearings contain extra iron and FDA-compliant oil. They’re flanged, so they handle loads both parallel and perpendicular to the shaft.

A slit running along the length of these bearings allows you to quickly slip them into a housing—no tools required.

Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.

Compensating for minor shaft misalignment and not requiring lubrication, these sleeve bearings swivel to self-align and are dry running. They don’t need a housing and you can install and replace them without any tools because they’re slip fit.

Good for underwater applications, these bearings won’t swell or warp when wet.

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

The oil in these bearings is suitable for incidental contact with food.

Made of 863 iron-copper and embedded with NSF registered H1 oil, these bearings can tackle high-load applications in food plants, such as bottling and filling lines.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

Good for underwater applications, these bearings won’t swell or warp when wet.

These bearings have higher radial load capacity, speed, and accuracy than standard needle-roller bearings.

Thinner rollers allow these bearings to fit in tighter spaces than tapered-roller thrust bearings.

Made from slippery materials, these bearings reduce friction without the oily mess.

Made of acetal blended with PTFE, these bearings handle speeds twice as fast as standard sleeve bearings.

Roller bearings have a thinner profile and larger contact area than ball bearings, making them stronger and more space-efficient than ball bearings.

Use these nylon or acetal bearings for light loads. The closed backing blocks out dust and other contaminants.

Handling speeds twice as fast as standard mounted sleeve bearings while limiting wear on your system, these bearings are made of PTFE-filled acetal.

These roller bearings handle extremely high speeds for their small size.

The choice for low-friction motion in high-temperature environments.

Designed to handle heavy loads, these bearings have higher load capacities than comparable standard linear ball bearings.

Ridges on the inside of these bearings wipe away dust and debris as the bearing travels on a shaft.

Thinner than standard linear sleeve bearings, these bearings fit where clearance is a concern.

Grooved on the inside, these bearings rotate with your spline shaft as they move loads up and down its length.

The shell, housing, and balls of these bearings are stainless steel for excellent corrosion resistance.

Outdoor as well as mild chemical environments are no problem for these bearings. They have stainless steel balls for corrosion resistance.