A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.

These 316 stainless steel bearings are more corrosion resistant than our other stainless steel bearings, but they have a lower load capacity.

A metal shell adds strength.

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

Found anywhere from machine tool spindles to conveyor rollers, these bearings have a two-piece design that allows for adjustment.

These bearings have higher radial load capacity, speed, and accuracy than standard needle-roller bearings.

Designed with a thin, compact housing, these bearings are good for space-constrained applications.

These bearings have the highest speed ratings of any mounted ball bearing that we offer.

With a flexible layer of neoprene sandwiched between an oil-embedded bronze bearing and rigid steel shell, these bearings reduce wear and machinery noise.

Designed with a thin, compact housing, these bearings are good for space-constrained applications.

With all three mounting holes on one side, you can position the bearing above or below the mounting surface.

Quickly mount bearings in these precision-flanged housings, no machining required.

Slide up to two linear ball or sleeve bearings into these housings and secure them with the included internal retaining rings.

This extruded acrylic offers similar performance as cast acrylic at a lower cost.

The head prevents these bushings from being pushed through the jig when drilling pressure is extreme. The head sits above the jig plate or can be mounted flush by installing in a counterbored hole.

Be prepared with ring shims in a variety of thicknesses. These shims fit around fasteners and shafts to precisely align, level, and adjust spacing.

Be prepared with shims in a variety of thicknesses. Also known as arbor spacers, these shims are notched to fit over keyed shafts.