Secure these bearings in washdown areas, such as food, beverage, pharmaceutical, and chemical plants, by tightening the set screw onto a shaft—no additional collar needed.

Found anywhere from machine tool spindles to conveyor rollers, these bearings have a two-piece design that allows for adjustment.

Adapt needle-roller thrust bearings to use on unhardened, unground surfaces.

A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface.

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

Also known as Oilite® bearings.

Use where high loads and speeds are not required.

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication.

Also known as tapped-base bearings, these ball bearings mount to surfaces from the bottom through threaded holes. Because of their narrow profile, they’re commonly used in tight-clearance spaces, including systems where multiple shafts are mounted close together.

A reliable classic—these babbitt bearings are strong and corrosion resistant.

A bolt in each corner makes for a secure, even hold.

Ball bearings operate with less friction than other bearings, so you can run them at higher speeds.

Combine with threaded pipe to mount these bearings in a variety of positions without the need for a flat mounting surface.

A toothed slot lets these bushings contract for insertion into the bore of your sprocket or pulley and then expand for a snug fit.

The tapered barrel on these bushings is split on both sides, allowing them to contract more tightly around the shaft than quick-disconnect and taper-lock bushings.

954 bronze contains a minimum of 10% aluminum for strength and weldability. It is also known as aluminum bronze. It's widely used for bearings, bushings, valve bodies, and worm gears. The strength of this material increases with heat treating.

An easier-to-machine alternative to 932 bronze, 936 also has better corrosion resistance. It's also called modified SAE 64.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

A good choice for making sprockets and pulleys, these cast nylon 6 tubes withstand higher temperatures and are easier to machine than standard nylon 6/6 tubes.

A unique design allows these joints to support heavy one-direction thrust loads as well as combined radial/thrust loads.