System of Measurement System of Measurement |
|---|
|
ID ID | Show |
|---|
|
ID ID | Hide |
|---|
For Shaft Diameter For Shaft Diameter |
|---|
|
For Load Direction For Load Direction |
|---|
 | Radial |
 | Combined Radial and Thrust |
 | Thrust |
Dynamic Radial Load Capacity Dynamic Radial Load Capacity |
|---|
|
Capacity Capacity |
|---|
|
Lubrication Lubrication |
|---|
|
Turntable Style Turntable Style |
|---|
|
For Shaft Type For Shaft Type |
|---|
 | Round |
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Static Radial Load Capacity Static Radial Load Capacity |
|---|
|
|
Maximum Temperature Maximum Temperature |
|---|
|
Power Source Power Source |
|---|
|
Shape Shape |
|---|
 |  |
| Round | Ring |
 | |
| Round Tube |
About Plain Bearings
More
About Ball and Roller Bearings
More
About Plastic
More
Set Screw Collar Ball Bearings
Slip these bearings onto a shaft and secure with the included set screws, no special tools required. All have an extended inner ring for additional shaft support.
Bearings with a black-oxide steel ring have some corrosion resistance.
Sealed bearings block out dust and other contaminants better than shielded bearings.
Bearings with a retaining ring have a removable retaining ring that holds the bearing inside a housing.
Flanged bearings have a flange that ensures proper positioning inside a tube or housing.
For technical drawings and 3-D models, click on a part number.
Inner Ring | Retaining Ring | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Wd. | OD | Thick. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | ABEC Rating | Each | |
Sealed (Lubricated) | ||||||||||||||
Black-Oxide Steel—With Retaining Ring | ||||||||||||||
| ER26 | 1 5/8" | 3.347" | 1 3/32" | 2.2969" | 1.9375" | 3 19/32" | 0.0625" | 7,900 | 5,100 | 3,800 | -20° to 220° | ABEC-1 | 0000000 | 0000000 |
Steel—Flanged | ||||||||||||||
| GYA110RRB | 1 5/8" | 3.3465" | 0.866" | 2.2813" | 1.6555" | __ | __ | 8,150 | 4,500 | 4,200 | -65° to 250° | ABEC-1 | 0000000 | 00000 |
Clamp-On Collar Ball Bearings
Quickly secure these bearings onto shafts with the clamp-on collar for a concentric, mar-free hold. Tighten the single screw on the locking collar around its inner ring on your shaft to center and secure the shaft in the bearing bore. The collar’s firm grip reduces vibration and noise in your system. The steel rings on these bearings have a black-oxide finish for some corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Inner Ring | Retaining Ring | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Wd. | OD | Thick. | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Sealed | |||||||||||||||
Black-Oxide Steel Ring | |||||||||||||||
| ER26 | 1 5/8" | 3 11/32" | 1 3/32" | 2.3125" | 1.938" | 3.594" | 0.063" | 7,900 | 5,100 | 5,300 | Lubricated | -20° to 220° | ABEC-1 | 0000000 | 0000000 |
Oil-Embedded Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1 5/8" Shaft Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 2" | 1 1/2" | 4,850 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 000000 |
| 2" | 2" | 6,500 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
| 2" | 3" | 9,400 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
Oil-Embedded Flanged Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bearing Bronze Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 1 5/8" Shaft Dia. | ||||||||||
| 2" | 2" | 2 1/4" | 3/16" | 6,500 lbs. @ 30 rpm | 3,800 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 000000 |
Multipurpose Flanged Sleeve Bearings
These leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 932 bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
660 Leaded Bronze Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 1 5/8" Shaft Dia. | |||||||||
| 2" | 2" | 2 1/4" | 3/16" | 13,000 lbs. @ 30 rpm | 7,600 lbs. @ 30 rpm | Required | -350° to 450° | 00000000 | 000000 |
Needle-Roller Bearings
Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together. Bearings take on the shape of their housing and may be oblong prior to installation.
Open bearings dissipate heat more efficiently than sealed bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | For Shaft Surface Smoothness (Ra), microinch | Temp. Range, °F | Specifications Met | Each | |
Open | ||||||||||||
| 1 5/8" | 2" | 5/8" | Steel | 5,700 | 8,900 | 6,800 | Required | 8 | -40° to 280° | __ | 00000000 | 000000 |
| 1 5/8" | 2" | 1 1/4" | Steel | 11,400 | 21,800 | 6,000 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 00000 |
Tapered-Roller Thrust Bearings
Thick, tapered rollers stand up to extremely high thrust loads.
Open bearings dissipate heat more efficiently than sealed bearings.
For technical drawings and 3-D models, click on a part number.
Thrust Load Cap., lbs. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | Each | |
Open | ||||||||||
| 1 5/8" | 2.869" | 0.8438" | Steel | 20,500 | 62,500 | 10 | Required | 0° to 150° | 00000000 | 000000 |
Compact-Base Mounted Ball Bearings
Also known as tapped-base bearings, these ball bearings mount to surfaces from the bottom through threaded holes. Because of their narrow profile, they’re commonly used in tight-clearance spaces, including systems where multiple shafts are mounted close together.
Set screw shaft-mount bearings secure to shafts when you tighten the set screw, with no need for an additional collar. Set screws cause some amount of marring on shafts.
Concentric lock shaft-mount bearings have a locking collar that centers and secures the shaft in the bearing bore. To install these bearings, tighten the single screw on the locking collar around its inner ring on your shaft. Their firm grip on shafts reduces vibration for quieter operation.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting Hole | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Thread Size | Dp. | Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Sealed Steel Bearings with Cast Iron Housing | |||||||||||||||
Shaft Mount Type: Set Screw | |||||||||||||||
| 1 5/8" | 2 1/8" | 4 1/4" | 5" | 2" | 1/2"-13 | 0.75" | 3 3/4" | 7,900 | 5,130 | 3,800 | -20° to 220° | Self Aligning | Lubricated | 00000000 | 0000000 |
Shaft Mount Type: Concentric Lock | |||||||||||||||
| 1 5/8" | 2 1/8" | 4 1/4" | 5" | 2" | 1/2"-13 | 0.75" | 3 3/4" | 7,900 | 5,130 | 5,300 | -20° to 220° | Self Aligning | Lubricated | 00000000 | 000000 |
Mounted Roller Bearings
Roller bearings have a thinner profile and larger contact area than ball bearings, making them stronger and more space-efficient than ball bearings.
Sealed bearings block out dust and contaminants.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | Radial Load Cap., lbs. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Hole Lg. | Hole Wd. | Hole Ctr.-to-Ctr. | Dynamic | Static | Dynamic Thrust Load Cap., lbs. | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Steel Bearings with Cast Iron Housing—Shaft Mount Type: Set Screw | ||||||||||||||||
| 1 5/8" | 2 1/8" | 4 1/4" | 7 7/8" | 3 3/8" | 3/4" | 5/8" | 6 1/4" | 7,850 | 33,000 | 2,550 | 3,300 | -60° to 250° | Fixed Alignment | Lubricated | 0000000 | 0000000 |
Wide-Rim Ring Shims
Also known as machinery bushings, these shims have an oversized OD to create a larger bearing surface for reduced wear between moving parts. Use them to precisely align, level, and adjust spacing on shafts and machinery.
Carbon steel shims have excellent strength and can be welded.
For technical drawings and 3-D models, click on a part number.
| ID | ID Tolerance | OD | OD Tolerance | Material | Min. Hardness | Magnetic Properties | Pkg. Qty. | Pkg. | |
0.075" Thick. (-0.007" to 0.007" Tolerance) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1 5/8" | -0.01" to 0.025" | 2 3/8" | -0.01" to 0.01" | 1008-1010 Carbon Steel | Rockwell B20 | Magnetic | 10 | 000000000 | 00000 |
0.134" Thick. (-0.008" to 0.008" Tolerance) | |||||||||
| 1 5/8" | -0.01" to 0.025" | 2 3/8" | -0.01" to 0.01" | 1008-1010 Carbon Steel | Rockwell B20 | Magnetic | 10 | 000000000 | 00000 |
Positioning Turntables
Simplify tasks such as spray painting, repair work, and inspection with these turntables that rotate to expose every side of an object while working.
For technical drawings and 3-D models, click on a part number.
Bearing | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Style | Capacity, lbs. | OD | ID | Overall Ht. | Material | Type | Material | Color | Each | |
Lubrication Not Required | ||||||||||
| A | 50 | 4 1/4" | 1 5/8" | 9/16" | Plastic | Ball | Steel | Clear | 0000000 | 00000 |
Press-Fit Drill Bushings
Mount flush with jig plates for precise drilling. These bushings can also be used as spacers, shims, and machinery bushings.
Don't see the size you need? Additional sizes are available.
For technical drawings and 3-D models, click on a part number.
Tolerance | Each | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OD | Lg. | For Drill Bit Size | ID | OD | Lg. | Drill Bushing Type | Material | Hardness | 1-5 | 6-11 | 12-Up | |
1.625" ID | ||||||||||||
| 2 1/4" | 1" | 1 5/8" | 0.0003" to 0.0007" | 0.0021" to 0.0025" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 000000 | 000000 | 000000 |
| 2 1/4" | 1 3/8" | 1 5/8" | 0.0003" to 0.0007" | 0.0021" to 0.0025" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
| 2 1/4" | 1 1/2" | 1 5/8" | 0.0003" to 0.0007" | 0.0021" to 0.0025" | -0.015" to 0.015" | P | Steel | Rockwell C61 | 00000000 | 00000 | 00000 | 00000 |
| 2 1/4" | 1 3/4" | 1 5/8" | 0.0003" to 0.0007" | 0.0021" to 0.0025" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
| 2 1/4" | 2 1/8" | 1 5/8" | 0.0003" to 0.0007" | 0.0021" to 0.0025" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
| 2 1/4" | 2 1/2" | 1 5/8" | 0.0003" to 0.0007" | 0.0021" to 0.0025" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
| 2 1/4" | 3" | 1 5/8" | 0.0003" to 0.0007" | 0.0021" to 0.0025" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 000000000 | 00000 | 00000 | 00000 |
Press-Fit Drill Bushings with Head
The head prevents these bushings from being pushed through the jig when drilling pressure is extreme. The head sits above the jig plate or can be mounted flush by installing in a counterbored hole. Drill bushings can also be used as spacers, shims, and machinery bushings.
Don't see the size you need? Additional sizes are available.
For technical drawings and 3-D models, click on a part number.
Head | Tolerance | Each | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OD | Lg. | For Drill Bit Size | OD | Thick. | ID | OD | Lg. | Drill Bushing Type | Material | Hardness | 1-5 | 6-11 | 12-Up | |
1.625" ID | ||||||||||||||
| 2 1/4" | 1 3/8" | 1 5/8" | 2 31/64" | 3/8" | 0.0003" to 0.0007" | 0.0021" to 0.0025" | -0.015" to 0.015" | H | Steel | Rockwell C61 | 00000000 | 000000 | 000000 | 000000 |
Clear Impact-Resistant Polycarbonate Tubes
- Color: Clear
- Temperature Range: -40° to 200° F
- Tensile Strength: 8,900-9,500 psi (Good)
- Impact Strength: 12-18 ft.-lbs./in. (Excellent)
- Hardness: Rockwell R118 (Hard)
- For Use Outdoors: No
Comparable to Lexan, Hyzod, Tuffak, and Makrolon, these polycarbonate tubes are half the weight of glass and maintain excellent impact resistance across a wide temperature range. Use them to make instrument gauge covers and display racks.
For technical drawings and 3-D models, click on a part number.
