McMaster-Carr logo
    Filter by
    Shaft Diameter
    Attribute Image
    System of Measurement
    Plain Bearing Type
    For Housing ID
    Attribute Image
    ID
    Attribute Image
    Shaft Mount Type
    Flange OD
    Attribute Image
    Lubrication
    Bearing Type
    Flange Thickness
    Shaft Type
    Lubrication Method
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    53 Products

    Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Oil-Embedded Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    162012590 lb. @ 60 rpmSynthetic Oil-35 to 3006658K74700000
    162016790 lb. @ 60 rpmSynthetic Oil-35 to 3006658K320000
    162020990 lb. @ 60 rpmSynthetic Oil-35 to 3006658K330000
    1620251,200 lb. @ 60 rpmSynthetic Oil-35 to 3006658K1870000
    1620301,450 lb. @ 60 rpmSynthetic Oil-35 to 3006658K1880000
    1620321,550 lb. @ 60 rpmSynthetic Oil-35 to 3006658K1890000
    162212590 lb. @ 60 rpmSynthetic Oil-35 to 3006658K1910000
    162216790 lb. @ 60 rpmSynthetic Oil-35 to 3006658K340000
    162220990 lb. @ 60 rpmSynthetic Oil-35 to 3006658K350000
    1622251,200 lb. @ 60 rpmSynthetic Oil-35 to 3006658K1920000
    1622301,450 lb. @ 60 rpmSynthetic Oil-35 to 3006658K1930000
    1622351,700 lb. @ 60 rpmSynthetic Oil-35 to 3006658K1940000
     
    High-Strength 863 Iron Copper
    1620121,050 lb. @ 60 rpmSynthetic Oil-15 to 3002868T3580000
    1620161,400 lb. @ 60 rpmSynthetic Oil-15 to 3002868T3590000
    1620201,750 lb. @ 60 rpmSynthetic Oil-15 to 3002868T3610000
    1622161,400 lb. @ 60 rpmSynthetic Oil-15 to 3002868T3620000
    1622201,750 lb. @ 60 rpmSynthetic Oil-15 to 3002868T3630000
     

    Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Mineral Oil Base—Mineral oil consistently lubricates at most temperatures but doesn’t last as long as synthetic oil.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    162012242590 lb. @ 60 rpm770 lb. @ 60 rpmSynthetic Oil-35 to 3006659K68600000
    162016242790 lb. @ 60 rpm770 lb. @ 60 rpmSynthetic Oil-35 to 3006659K320000
    162020242990 lb. @ 60 rpm770 lb. @ 60 rpmSynthetic Oil-35 to 3006659K330000
    162212283590 lb. @ 60 rpm1,250 lb. @ 60 rpmMineral Oil10 to 2206659K1270000
    162216283790 lb. @ 60 rpm1,250 lb. @ 60 rpmSynthetic Oil-35 to 3006659K340000
    162220283990 lb. @ 60 rpm1,250 lb. @ 60 rpmSynthetic Oil-35 to 3006659K350000
    1622252831,200 lb. @ 60 rpm1,250 lb. @ 60 rpmMineral Oil10 to 2206659K1280000
     
    High-Strength 863 Iron Copper
    1620122421,050 lb. @ 60 rpm910 lb. @ 60 rpmSynthetic Oil-15 to 3002938T7870000
    1620162421,400 lb. @ 60 rpm910 lb. @ 60 rpmSynthetic Oil-15 to 3002938T7880000
    1620202421,750 lb. @ 60 rpm910 lb. @ 60 rpmSynthetic Oil-15 to 3002938T7890000
    1622162831,400 lb. @ 60 rpm1,250 lb. @ 60 rpmSynthetic Oil-15 to 3002938T790000
    1622202831,750 lb. @ 60 rpm1,250 lb. @ 60 rpmSynthetic Oil-15 to 3002938T7910000
     

    Ultra-Low-Friction Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Ultra-Low-Friction Oil-Embedded Sleeve Bearings.
    Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Specs.
    Met
    Each
    841 Bearing Bronze
    162012590 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 300ASTM B4381688K16800000
    162016790 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 300ASTM B4381688K1690000
    162020990 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 300ASTM B4381688K1710000
     
    High-Strength 863 Iron Copper
    1620121,050 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 3007460N1680000
    1620161,400 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 3007460N1690000
    1620201,750 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 3007460N1710000
    1622161,400 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 3007460N1720000
    1622201,750 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 3007460N1730000
     

    Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings.
    Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Specs.
    Met
    Each
    841 Bearing Bronze
    162012242590 lb. @ 60 rpm770 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 300ASTM B4381677K25500000
    162216283790 lb. @ 60 rpm1,250 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 300ASTM B4381677K2580000
    162220283990 lb. @ 60 rpm1,250 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 300ASTM B4381677K2590000
     
    High-Strength 863 Iron Copper
    1620122421,050 lb. @ 60 rpm910 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 3007119N1540000
    1620162421,400 lb. @ 60 rpm910 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 3007119N1550000
    1620202421,750 lb. @ 60 rpm910 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 3007119N1560000
    1622162831,400 lb. @ 60 rpm1,250 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 3007119N1570000
    1622202831,750 lb. @ 60 rpm1,250 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 3007119N1580000
     

    Vibration-Damping Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Vibration-Damping Oil-Embedded Sleeve Bearings.
    These bearings quiet equipment by absorbing vibration. The rubber layer on the inside of these bearings flexes to align the shaft and reduce rattling. The bronze core is made from porous metal and saturated with oil to reduce maintenance and downtime. They’re used in compressors, engine mounts, and other vibrating equipment that suddenly starts and stops.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze with 304 Stainless Steel Shell—The choice for most wet locations. These bearings won't corrode after washdowns and can stand up to most detergents and oil.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Cushion
    Material
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze with 304 Stainless Steel Shell
    162825245 lb. @ 60 rpmSilicone Rubber
    Synthetic Oil-35 to 3006364K520000000
     

    Oil-Embedded Flanged Sleeve Bearings for Food and Beverage

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings for Food and Beverage.
    These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for incidental contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for direct contact with food, consider dry-running flanged sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Specs. Met
    Each
    841 Bearing Bronze
    162012242590 lb. @ 60 rpm770 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35703746K8500000
    162016242790 lb. @ 60 rpm770 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35703746K860000
    162216283790 lb. @ 60 rpm1,250 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35703746K880000
    162220283990 lb. @ 60 rpm1,250 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35703746K890000
     

    Oil-Embedded Sleeve Bearings for Food and Beverage

    Image of Product. Front orientation. Sleeve Bearings. Oil-Embedded Sleeve Bearings for Food and Beverage.
    These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for unintended contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for contact with food, consider dry-running sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Specs. Met
    Each
    841 Bearing Bronze
    162016790 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35707095K16900000
     
    High-Strength 863 Iron Copper
    1622161,400 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.3570, ASTM B4397407N1720000
    1622201,750 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.3570, ASTM B4397407N1730000
     
    back to top