McMaster-Carr logo
    Filter by
    Shaft Diameter
    Attribute Image
    System of Measurement
    Plain Bearing Type
    ID
    Attribute Image
    For Housing ID
    Attribute Image
    Lubrication
    Shaft Mount Type
    Shaft Type
    Bearing Type
    Flange Thickness
    Maximum Temperature
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Lubrication Method
    Minimum Temperature
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    30 Products

    Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Oil-Embedded Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    2227151,000 lb. @ 60 rpmSynthetic Oil-35 to 3006658K23500000
    2227181,200 lb. @ 60 rpmSynthetic Oil-35 to 3006658K490000
    2227201,350 lb. @ 60 rpmSynthetic Oil-35 to 3006658K2360000
    2227221,500 lb. @ 60 rpmSynthetic Oil-35 to 3006658K510000
    2227302,000 lb. @ 60 rpmSynthetic Oil-35 to 3006658K23800000
    2227352,350 lb. @ 60 rpmSynthetic Oil-35 to 3006658K23900000
    2228181,200 lb. @ 60 rpmSynthetic Oil-35 to 3006658K520000
    2228201,350 lb. @ 60 rpmSynthetic Oil-35 to 3006658K2420000
    2228221,500 lb. @ 60 rpmSynthetic Oil-35 to 3006658K530000
    2228251,700 lb. @ 60 rpmSynthetic Oil-35 to 3006658K2430000
    2228302,000 lb. @ 60 rpmSynthetic Oil-35 to 3006658K2440000
    2229181,200 lb. @ 60 rpmSynthetic Oil-35 to 3006658K540000
    2229221,500 lb. @ 60 rpmSynthetic Oil-35 to 3006658K550000
    2229352,350 lb. @ 60 rpmSynthetic Oil-35 to 3006658K24500000
     
    High-Strength 863 Iron Copper
    2227221,900 lb. @ 60 rpmSynthetic Oil-15 to 3002868T37900000
     

    Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    222718322.51,200 lb. @ 60 rpm1,300 lb. @ 60 rpmSynthetic Oil-35 to 3006659K45000000
    222722322.51,500 lb. @ 60 rpm1,300 lb. @ 60 rpmSynthetic Oil-35 to 3006659K4600000
    2228153431,000 lb. @ 60 rpm1,600 lb. @ 60 rpmSynthetic Oil-35 to 3006659K470000
    2228203431,350 lb. @ 60 rpm1,600 lb. @ 60 rpmSynthetic Oil-35 to 3006659K480000
    222922363.51,500 lb. @ 60 rpm1,950 lb. @ 60 rpmSynthetic Oil-35 to 3006659K5200000
     

    Ultra-Low-Friction Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Ultra-Low-Friction Oil-Embedded Sleeve Bearings.
    Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Specs.
    Met
    Each
    841 Bearing Bronze
    2227181,200 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 300ASTM B4381688K18800000
     
    High-Strength 863 Iron Copper
    2227181,550 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 3007460N1880000
    2227221,900 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 3007460N18900000
     

    Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings.
    Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Specs.
    Met
    Each
    841 Bearing Bronze
    222722322.51,450 lb. @ 60 rpm1,300 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 300ASTM B4381677K274000000
    222922363.51,450 lb. @ 60 rpm1,950 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 300ASTM B4381677K27800000
     
    High-Strength 863 Iron Copper
    222722322.51,900 lb. @ 60 rpm1,150 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 3007119N17300000
    2228203431,750 lb. @ 60 rpm1,350 lb. @ 60 rpmSynthetic OilPTFE
    -60 to 3007119N17500000
     

    Oil-Embedded Flanged Sleeve Bearings for Food and Beverage

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings for Food and Beverage.
    These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for incidental contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for direct contact with food, consider dry-running flanged sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Specs. Met
    Each
    841 Bearing Bronze
    2228203431,350 lb. @ 60 rpm1,600 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35703746K106000000
     

    Oil-Embedded Sleeve Bearings for Food and Beverage

    Image of Product. Front orientation. Sleeve Bearings. Oil-Embedded Sleeve Bearings for Food and Beverage.
    These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for unintended contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for contact with food, consider dry-running sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Specs. Met
    Each
    841 Bearing Bronze
    2228181,200 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35707095K191000000
    2228221,500 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35707095K19200000
     
    back to top