These steel ball bearings handle higher loads than stainless steel and plastic bearings.

For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.

Good for use in electric motors and power generators, these bearings have ceramic balls that insulate against stray current to prevent damage to the bearing.

For use on tapered shafts and round shafts with adapter sleeves, these ball-bearings have a spherical raceway to compensate for shaft misalignment.

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Bearings are 440C stainless steel.

These 316 stainless steel bearings are more corrosion resistant than our other stainless steel bearings, but they have a lower load capacity.

With two rows of balls, these lightweight bearings have greater durability and load capacity—and a wider profile—than single-row plastic bearings.

Slip these bearings onto a shaft and secure with the included set screws, no special tools required.

Install these bearings for use with combined radial and thrust loads. They are often used in spindle applications and can be combined with cylindrical roller bearings to better handle radial loads.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

Graphite provides a layer of dry lubrication that can operate in high-temperature environments.

A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface.

With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

These leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads.

Also known as Oilite® bearings.

The oil in these bearings is suitable for incidental contact with food.

Made of 863 bearing bronze and embedded with NSF registered H1 oil, these bearings can tackle high-load applications in food plants, such as bottling and filling lines.

These leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads.

Found anywhere from machine tool spindles to conveyor rollers, these bearings have a two-piece design that allows for adjustment.

Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings.

Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together.

With cylindrical rollers to distribute load over a large surface area, these bearings are often used to support heavy loads at high speeds in applications such as power generation and metal recycling.

Ball bearings operate with less friction than other bearings, so they can run at higher speeds.

Meeting IP69K for washdown environments, these mounted ball bearings are used in food, beverage, pharmaceutical, and chemical plants.

Ball bearings operate with less friction than other bearings, so you can run them at higher speeds.

Permanently lubricated and IP69K certified for washdown environments, these mounted ball bearings are useful for hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants. Mount them using their two-bolt flange.

Made to withstand frequent washdowns, these bearings are permanently lubricated, which means you’ll never have to add lubricant. Use them in hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants.