A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.

Use these bearings where high speed and precision are not required.

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Bearings are 440C stainless steel.

These 316 stainless steel bearings are more corrosion resistant than our other stainless steel bearings, but they have a lower load capacity.

With two rows of balls, these lightweight bearings have greater durability and load capacity—and a wider profile—than single-row plastic bearings.

These PEEK bearings operate in temperatures almost twice as high as our other plastic ball bearings.

Install these acetal bearings in caustic environments and where lubrication can’t be used. They have good all-around corrosion and chemical resistance.

Quickly secure these bearings onto shafts with the clamp-on collar for a concentric, mar-free hold.

A metal shell adds strength.

Use where high loads and speeds are not required.

Permanently and securely install these self-clinching bearings into panels, with no need for precision-bored holes or machined mounts.

A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

These leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

Made of 863 iron-copper and embedded with NSF registered H1 oil, these bearings can tackle high-load applications in food plants, such as bottling and filling lines.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

These leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads.

Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together.

Adapt high-precision needle-roller bearings to use on unhardened, unground shafts.

Designed with a thin, compact housing, these bearings are good for space-constrained applications.

Also known as tapped-base bearings, these ball bearings mount to surfaces from the bottom through threaded holes. Because of their narrow profile, they’re commonly used in tight-clearance spaces, including systems where multiple shafts are mounted close together.

The lubricant in these mounted ball bearings is suitable for incidental contact with food.

Use these bearings in corrosive environments and under water.

Use these UHMW bearings in wet, corrosive environments.

With a flexible layer of neoprene sandwiched between an oil-embedded bronze bearing and rigid steel shell, these bearings reduce wear and machinery noise.

Roller bearings have a thinner profile and larger contact area than ball bearings, making them stronger and more space-efficient than ball bearings.

Designed with a thin, compact housing, these bearings are good for space-constrained applications.

Use these bearings in corrosive environments and under water.