Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 841 Bronze Bearings

For 32 mm Shaft Dia.
For Housing ID, mm	Lg., mm	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
38	20	1,950 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	000000
38	25	2,400 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000
40	20	1,950 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	0000
40	25	2,400 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	0000
40	30	2,900 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	0000
40	32	3,150 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	0000
40	40	3,900 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000

High-Load Oil-Embedded Sleeve Bearings

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

863 Iron-Copper Bearings

For 32mm Shaft Dia.
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
40mm	32mm	5,600 lbs. @ 30 rpm	Lubricated	SAE 90 Oil	-15° to 300°	00000000	000000

Ultra-Low-Friction Oil-Embedded Sleeve Bearings

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 841 Bronze Bearings

For 32mm Shaft Dia.
For Housing ID, mm	Lg., mm	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
40	32	3,150 lbs. @ 30 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	00000000	000000

Food Industry Oil-Embedded Sleeve Bearings

The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

841 Bronze Bearings

For 32mm Shaft Dia.
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
40mm	32mm	3,150 lbs. @ 30 rpm	Lubricated	SAE 20 Oil	-75° to 300°	00000000	000000

High-Load Ultra-Low-Friction Oil-Embedded Sleeve Bearings

Use these bearings for frequent starts and stops in high-load applications. Startup friction causes these bearings to release a thin layer of oil that contains PTFE to lubricate the bearing’s surface. All have more iron content than standard oil-embedded bearings to handle heavier loads and higher shock loads, but operate at lower speeds.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

863 Bearing Bronze
For Housing ID, mm	Length, mm	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 32 mm Shaft Dia.
40	32	5,600 lbs. @ 30 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	00000000	000000

Oil-Embedded Flanged Sleeve Bearings

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 841 Bearing Bronze Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 32mm Shaft Dia.
38mm	32mm	46mm	4mm	3,150 lbs. @ 30 rpm	2,650 lbs. @ 30 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	000000

High-Load Oil-Embedded Flanged Sleeve Bearings

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

863 Bearing Bronze Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 32mm Shaft Dia.
38mm	32mm	46mm	4mm	5,600 lbs. @ 30 rpm	3,250 lbs. @ 30 rpm	Lubricated	ISO 460 Oil	-15° to 300°	00000000	000000

Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

841 Bronze Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 32mm Shaft Dia.
38mm	32mm	46mm	4mm	3,150 lbs. @ 30 rpm	2,650 lbs. @ 30 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	00000000	000000