McMaster-Carr logo
    Filter by
    Shaft Diameter
    Attribute Image
    System of Measurement
    Plain Bearing Type
    ID
    Attribute Image
    For Housing ID
    Attribute Image
    Shaft Mount Type
    Lubrication
    Bearing Type
    Flange OD
    Attribute Image
    Shaft Type
    Lubrication Method
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Minimum Temperature
    Maximum Temperature
    Dynamic Thrust Load Capacity @ Speed
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    21 Products

    Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Oil-Embedded Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    3541252,700 lb. @ 30 rpmSynthetic Oil-35 to 3006658K277000000
    3541353,750 lb. @ 30 rpmSynthetic Oil-35 to 3006658K27800000
    3544283,000 lb. @ 30 rpmSynthetic Oil-35 to 3006658K28100000
    3544353,750 lb. @ 30 rpmSynthetic Oil-35 to 3006658K28200000
    3545252,700 lb. @ 30 rpmSynthetic Oil-35 to 3006658K76500000
    3545303,250 lb. @ 30 rpmSynthetic Oil-35 to 3006658K28300000
    3545353,750 lb. @ 30 rpmSynthetic Oil-35 to 3006658K7200000
    3545404,300 lb. @ 30 rpmSynthetic Oil-35 to 3006658K28400000
    3545505,400 lb. @ 30 rpmSynthetic Oil-35 to 3006658K76600000
     
    High-Strength 863 Iron Copper
    3545356,100 lb. @ 30 rpmSynthetic Oil-15 to 3002868T40400000
    3545508,750 lb. @ 30 rpmSynthetic Oil-15 to 3002868T40500000
     

    Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings.
    Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Specs.
    Met
    Each
    841 Bearing Bronze
    354025452.52,700 lb. @ 30 rpm1,900 lb. @ 30 rpmSynthetic OilPTFE
    -60 to 300ASTM B4381677K289000000
     
    High-Strength 863 Iron Copper
    354032452.55,600 lb. @ 30 rpm2,400 lb. @ 30 rpmSynthetic OilPTFE
    -60 to 3007119N18900000
     

    Ultra-Low-Friction Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Ultra-Low-Friction Oil-Embedded Sleeve Bearings.
    Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Specs.
    Met
    Each
    841 Bearing Bronze
    3545353,750 lb. @ 30 rpmSynthetic OilPTFE
    -60 to 300ASTM B4381688K214000000
     
    High-Strength 863 Iron Copper
    3545356,100 lb. @ 30 rpmSynthetic OilPTFE
    -60 to 3007460N22400000
    3545508,750 lb. @ 30 rpmSynthetic OilPTFE
    -60 to 3007460N22500000
     

    Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    354025452.52,700 lb. @ 30 rpm1,900 lb. @ 30 rpmSynthetic Oil-35 to 3006659K717000000
    354032452.53,450 lb. @ 30 rpm1,900 lb. @ 30 rpmSynthetic Oil-35 to 3006659K71800000
     
    High-Strength 863 Iron Copper
    354025452.54,350 lb. @ 30 rpm2,400 lb. @ 30 rpmSynthetic Oil-15 to 3002938T81900000
    354032452.55,600 lb. @ 30 rpm2,400 lb. @ 30 rpmSynthetic Oil-15 to 3002938T8200000
     

    Oil-Embedded Sleeve Bearings for Food and Beverage

    Image of Product. Front orientation. Sleeve Bearings. Oil-Embedded Sleeve Bearings for Food and Beverage.
    These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for unintended contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for contact with food, consider dry-running sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Specs. Met
    Each
    841 Bearing Bronze
    3545505,400 lb. @ 30 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35707095K225000000
     
    back to top