System of Measurement System of Measurement |
|---|
|
For Shaft Diameter For Shaft Diameter |
|---|
|
For Housing ID For Housing ID |
|---|
|
ID ID | Show |
|---|
|
ID ID | Hide |
|---|
Cage Material Cage Material |
|---|
|
Maximum Speed Maximum Speed |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Specifications Met Specifications Met |
|---|
Plain Bearing Type Plain Bearing Type |
|---|
 | Sleeve |
Roller Bearing Type Roller Bearing Type |
|---|
|
Lubrication Lubrication |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
For Shaft Type For Shaft Type |
|---|
 | Round |
For Shaft Surface Smoothness (Ra) For Shaft SurfaceSmoothness (Ra) |
|---|
|
Roller Material Roller Material |
|---|
|
Material Material |
|---|
|
Static Thrust Load Capacity Static Thrust Load Capacity |
|---|
|
Dynamic Thrust Load Capacity Dynamic ThrustLoad Capacity |
|---|
|
About Plain Bearings
More
About Ball and Roller Bearings
More
Food Industry Dry-Running Sleeve Bearings
Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.
Acetal bearings are FDA compliant for direct contact with food. They’re also bright blue, making them easy to spot if they fall into your line.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
Metric Acetal Plastic Bearings | |||||||
|---|---|---|---|---|---|---|---|
For 5mm Shaft Dia. | |||||||
| 7mm | 10mm | 10 lbs. @ 120 rpm | Blue | -50° to 190° | FDA Compliant 21 CFR 177.1550 | 00000000 | 00000 |
Needle-Roller Thrust Bearings
Thinner rollers allow these bearings to fit in tighter spaces than tapered-roller thrust bearings. Because of the large contact area between the rollers and washers (not included), these bearings are great for medium to heavy duty, low-friction jobs. For use on hardened and ground surfaces.
For technical drawings and 3-D models, click on a part number.
Thrust Load Cap., lbs. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | OD | Thick. | Dynamic | Static | Max. Speed, rpm | Lubrication | For Shaft Surface Smoothness (Ra), microns | Temp. Range, °F | Specifications Met | Each | |
Steel Rollers | |||||||||||
Open | |||||||||||
| 5mm | 15mm | 2mm | 1,050 | 2,050 | 21,000 | Required | 0.2 | 0° to 240° | DIN 5405-2 | 000000 | 00000 |
| For Shaft Dia. | OD | Thick. | Washer Material | Specifications Met | Each | |
| 5mm | 15mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 00000 |
Washers for Needle-Roller Thrust Bearings
Adapt needle-roller thrust bearings to use on unhardened, unground surfaces.
For technical drawings and 3-D models, click on a part number.
| For Shaft Dia. | OD | Thick. | Washer Material | Specifications Met | Each | |
| 5mm | 15mm | 1mm | Steel | DIN 5405-3, ISO 303 | 00000000 | 00000 |