These steel ball bearings handle higher loads than stainless steel and plastic bearings.

For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.

Good for use in electric motors and power generators, these bearings have ceramic balls that insulate against stray current to prevent damage to the bearing.

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Bearings are 440C stainless steel.

Install these bearings for use with combined radial and thrust loads. They are often used in spindle applications and can be combined with cylindrical roller bearings to better handle radial loads.

Use where high loads and speeds are not required.

These leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads.

With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications.

These leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads.

Found anywhere from machine tool spindles to conveyor rollers, these bearings have a two-piece design that allows for adjustment.

Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings.

Ball bearings operate with less friction than other bearings, so they can run at higher speeds.

Permanently lubricated and IP69K certified for washdown environments, these mounted ball bearings are useful for hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants. Mount them using their two-bolt flange.

Made to withstand frequent washdowns, these bearings are permanently lubricated, which means you’ll never have to add lubricant. Use them in hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants.

Swap out worn inserts instead of replacing the entire mounted unit.

Use ball bearings in debris-free environments and when speed is a necessity. They operate with less friction than sleeve bearings, so you can run them at higher speeds.

Ball bearings create less friction than sleeve bearings, so they require less force to operate.