A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.

Bearings are 440C stainless steel for good corrosion resistance.

Made to tight tolerances, these 440C stainless steel bearings combine speed and accuracy with corrosion resistance.

These 316 stainless steel bearings are more corrosion resistant than our other stainless steel bearings, but they have a lower load capacity.

The flange ensures proper positioning inside a tube or housing.

Unlike other ball bearings, these do not need to be fully inserted into a housing. A spline around the outside of the bearing creates a permanent, secure hold in thin panels.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

With extra iron and filled with oil containing slippery PTFE, these bearings support heavy loads that frequently start and stop along shafts. They’re sleeve bearings, so they handle loads parallel to the shaft.

Embedded with oil that is safe for incidental contact with food, these bearings are suitable for use in high-load applications such as bottling and filling lines in food processing plants. They are also known as Super Oilite® bearings.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.

These leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications.

Support heavy loads that are often found in bottling and filling lines in food plants—these bearings contain extra iron and FDA-compliant oil. They’re flanged, so they handle loads both parallel and perpendicular to the shaft.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

These bearings stand up to a wider range of chemicals than other dry-running flanged sleeve bearings.

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

The oil in these bearings is suitable for incidental contact with food.

Made of 863 iron-copper and embedded with NSF registered H1 oil, these bearings can tackle high-load applications in food plants, such as bottling and filling lines.

These leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads.

The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed. Also known as drawn-cup roller clutches.

These nylon bearings swivel inside their housing to compensate for over 20° of shaft misalignment.

Roller bearings have a thinner profile and larger contact area than ball bearings, making them stronger and more space-efficient than ball bearings.

These roller bearings handle extremely high speeds for their small size.

The choice for low-friction motion in high-temperature environments.

The shell, housing, and balls of these bearings are stainless steel for excellent corrosion resistance.

Ready to mount on your linear motion spline shaft, these bearings come installed in a housing and have grooves that match up with the splines on your shaft.

These internally threaded rod ends have an eyelet and a ball that swivels to support angular misalignment. Also known as rod-end bearings.

A PTFE-embedded insert or PTFE liner reduces wear, handles shock loads, and eliminates the need for lubrication.

Made of stainless steel, these externally threaded rod ends provide excellent corrosion resistance.

Made of impact-resistant nylon, these internally threaded rod ends withstand corrosion as well as fuels, lyes, and weak acids. They do not require lubrication and are 80% lighter than steel rod ends.

These internally threaded steel rod ends handle loads that are at least 25% higher than other comparably sized rod ends.

An innovative body design keeps the ball from being pushed out when supporting thrust loads.

Along with internal threads, these rod ends have a double row of precision ball bearings that allows high speeds and smooth operation.

Keep dirt out and lubrication in to extend the life of your rod ends.

A slippery PTFE liner reduces wear and eliminates the need for lubrication.