A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.

Use these bearings where high speed and precision are not required.

Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and race that eliminates the need for additional lubrication.

Made of slippery plastic, these bearings do not require lubrication and have excellent corrosion and chemical resistance.

Slip these bearings onto a shaft and secure with the included set screws, no special tools required.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

Use where high loads and speeds are not required.

These leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads.

Use where high loads and speeds are not required.

These leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads.

Use where high loads and speeds are not required.

Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together.

Adapt high-precision needle-roller bearings to use on unhardened, unground shafts.

Designed with a thin, compact housing, these bearings are good for space-constrained applications.

Use these UHMW bearings in wet, corrosive environments.

Ball bearings operate with less friction than other bearings, so you can run them at higher speeds.

Use these bearings in corrosive environments and under water.

With all three mounting holes on one side, you can position the bearing above or below the mounting surface.

Quickly mount bearings in these precision-flanged housings, no machining required.

Slide up to two linear ball or sleeve bearings into these housings and secure them with the included internal retaining rings.

A PTFE-embedded insert or PTFE liner reduces wear, handles shock loads, and eliminates the need for lubrication.

Made of cadmium-plated steel, these externally threaded rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends.

These externally threaded steel rod ends handle loads that are at least 25% higher than other comparably sized rod ends.

Without changing the ID, these inserts handle some misalignment on rod ends.

A slippery PTFE liner reduces wear and eliminates the need for lubrication.

Stronger than plastic models, these stainless steel swivel joints are also more corrosion resistant than steel joints.

A unique design allows these joints to support heavy one-direction thrust loads as well as combined radial/thrust loads.

Good for general purpose applications where corrosion and high strength aren’t a concern, these rod end bolts are made of carbon steel.

Create pivoting connections in applications that require high shear strength—the partially threaded shank of these rod end bolts withstands more side force than a fully threaded shank.

Powdered bronze is pressed and then impregnated with SAE 30 oil to make this material self-lubricating.

The head prevents these bushings from being pushed through the jig when drilling pressure is extreme. The head sits above the jig plate or can be mounted flush by installing in a counterbored hole.

Be prepared with ring shims in a variety of thicknesses. These shims fit around fasteners and shafts to precisely align, level, and adjust spacing.

These shims are made of layers of metal bonded with adhesive. Remove layers with a utility knife until you get the thickness you need.

Precisely shaped to fit snugly on keyed shafts, these shims align, level, and space components. Because of their tight fit, they also help components rotate in unison with the shaft.