Steel balls and washers allow these bearings to handle higher loads than bearings with stainless steel components. With an open design, they dissipate heat more efficiently than one-piece thrust ball bearings.

Bearings with steel cage and with bronze cage handle higher loads and speeds than bearings with a plastic cage.

For technical drawings and 3-D models, click on a part number.

Found anywhere from machine tool spindles to conveyor rollers, these bearings have a two-piece design that allows for adjustment.

For technical drawings and 3-D models, click on a part number.

Mounting holes on the inner and outer rings allow for fastening onto hollow joints and shafts. The rollers face in alternating directions to allow for rigid, accurate motion under any combination of radial, thrust, and moment (twisting) loads. Use in applications where highly accurate motion is necessary, such as machine tools and industrial robots.

Open bearings dissipate heat more efficiently than sealed bearings.

Sealed bearings block out dust and other contaminants better than open bearings, but retain more heat.

For technical drawings and 3-D models, click on a part number.

With a considerably larger ID than our Face-Mount Crossed-Roller Bearings, use these to run hydraulic lines, electrical wiring, and other components through the inside of the bearing. The rollers face in alternating directions to allow for rigid, accurate motion under any combination of radial, thrust, and moment (twisting) loads. Use in applications where highly accurate motion is necessary, such as machine tools and industrial robots.

Open bearings dissipate heat more efficiently than sealed bearings.

Sealed bearings block out dust and other contaminants better than open bearings, but retain more heat.

For technical drawings and 3-D models, click on a part number.

Roller bearings have a thinner profile and larger contact area than ball bearings, making them stronger and more space-efficient than ball bearings.

Sealed bearings block out dust and contaminants.

For technical drawings and 3-D models, click on a part number.

The tapered rollers in these bearings support large shafts at high static loads. Seals block out dust and contaminants.

For technical drawings and 3-D models, click on a part number.

Also known as jig bushings, these metric drill bushings fit inside fixture plate holes to guide drill bits, counterbores, reamers, and other cutting tools. They improve accuracy so that your drilled holes and cuts are consistent from part to part. Known for their versatility, drill bushings are also used as spacers, shims, and machinery bushings. These bushings are made of hardened, ground steel that holds its shape and resists wear, so they last for many cycles without needing to be replaced.

All bushings have a chamfer on the outside that centers the bushing as you place it into the hole. Press into place with a manual or hydraulic press. They also have internal chamfers, so it's easier to insert bits, pins, and punches into the bushing. Don't see the size you need? Additional sizes are available.

For technical drawings and 3-D models, click on a part number.