System of Measurement System of Measurement |
|---|
|
For Housing ID For Housing ID |
|---|
|
Material Material |
|---|
|
OD OD | Show |
|---|
|
OD OD | Hide |
|---|
Bearing Type Bearing Type |
|---|
 | Plain |
Lubrication Lubrication |
|---|
|
For Load Direction For Load Direction |
|---|
 |  |
| Radial | Combined Radial and Thrust |
Flange Thickness Flange Thickness |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Shaft Mount Type Shaft Mount Type |
|---|
| Slip Fit |
Dynamic Radial Load Capacity Dynamic Radial Load Capacity |
|---|
|
For Shaft Type For Shaft Type |
|---|
 | Round |
Lubricant Lubricant |
|---|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Dynamic Thrust Load Capacity Dynamic Thrust Load Capacity |
|---|
|
About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1/4" Shaft Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 3/8" | 7/16" | 215 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 00000 |
| 3/8" | 9/16" | 280 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
| 3/8" | 1 1/8" | 560 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
| 3/8" | 1 1/4" | 620 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
For 5/16" Shaft Dia. | |||||||
| 3/8" | 5/16" | 195 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
Ultra-Low-Friction Oil-Embedded Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1/4" Shaft Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 3/8" | 1/4" | 125 lbs. @ 120 rpm | Lubricated | SAE 80 Oil with PTFE | -40° to 300° | 000000 | 00000 |
| 3/8" | 3/8" | 185 lbs. @ 120 rpm | Lubricated | SAE 80 Oil with PTFE | -40° to 300° | 000000 | 000 |
| 3/8" | 1/2" | 250 lbs. @ 120 rpm | Lubricated | SAE 80 Oil with PTFE | -40° to 300° | 000000 | 000 |
| 3/8" | 1" | 500 lbs. @ 120 rpm | Lubricated | SAE 80 Oil with PTFE | -40° to 300° | 000000 | 0000 |
High-Temperature Dry-Running Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
841 bronze bearings are porous and embedded with graphite for continuous lubrication.
660 leaded bronze bearings are cast, making them strong, wear resistant, and excellent at handling shock loads. They are sometimes called 932 bronze bearings.
Grooved bearings have a graphite-filled groove on the inside of the bearing that distributes lubricant evenly along the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication Method | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||
|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | ||||||
| 3/8" | 1/4" | 100 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 00000 |
| 3/8" | 3/8" | 150 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 000 |
| 3/8" | 1/2" | 200 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 3/8" | 5/8" | 250 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
| 3/8" | 7/8" | 350 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 3/8" | 1" | 400 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 0000 |
For 5/16" Shaft Dia. | ||||||
| 3/8" | 1/4" | 125 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 000 |
| 3/8" | 3/8" | 185 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 000 |
| 3/8" | 1/2" | 250 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 000 |
| 3/8" | 5/8" | 310 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 000 |
| 3/8" | 3/4" | 370 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 000 |
| 3/8" | 1" | 500 lbs. @ 120 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
660 Leaded Bronze Bearings | ||||||
For 1/4" Shaft Dia. | ||||||
| 3/8" | 1/2" | 430 lbs. @ 120 rpm | Grooved | -350° to 450° | 00000000 | 00000 |
| 3/8" | 3/4" | 650 lbs. @ 120 rpm | Grooved | -350° to 450° | 00000000 | 00000 |
Multipurpose Sleeve Bearings
These 660 leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 932 bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
660 Leaded Bronze Bearings | ||||||
|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | ||||||
| 3/8" | 1/4" | 250 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
| 3/8" | 3/8" | 370 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
| 3/8" | 1/2" | 500 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
| 3/8" | 5/8" | 620 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
| 3/8" | 7/8" | 870 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
| 3/8" | 1" | 1,000 lbs. @ 120 rpm | Required | -350° to 450° | 0000000 | 0000 |
For 5/16" Shaft Dia. | ||||||
| 3/8" | 1/4" | 310 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
| 3/8" | 3/8" | 460 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
| 3/8" | 1/2" | 620 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
| 3/8" | 5/8" | 780 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
| 3/8" | 3/4" | 930 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 0000 |
| 3/8" | 1" | 1,250 lbs. @ 120 rpm | Required | -350° to 450° | 0000000 | 0000 |
Oil-Embedded Flanged Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bearing Bronze Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | ||||||||||
| 3/8" | 1/4" | 1/2" | 1/16" | 125 lbs. @ 120 rpm | 290 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
| 3/8" | 3/8" | 1/2" | 1/16" | 185 lbs. @ 120 rpm | 290 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 000 |
| 3/8" | 1/2" | 1/2" | 1/16" | 250 lbs. @ 120 rpm | 290 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 000 |
| 3/8" | 3/4" | 1/2" | 1/16" | 370 lbs. @ 120 rpm | 290 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | ||||||||||
| 3/8" | 3/16" | 1/2" | 1/16" | 90 lbs. @ 120 rpm | 290 lbs. @ 120 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 00000 |
| 3/8" | 1/4" | 1/2" | 1/16" | 125 lbs. @ 120 rpm | 290 lbs. @ 120 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 000000 | 000 |
| 3/8" | 3/8" | 1/2" | 1/16" | 185 lbs. @ 120 rpm | 290 lbs. @ 120 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 000000 | 0000 |
| 3/8" | 7/16" | 1/2" | 1/16" | 215 lbs. @ 120 rpm | 290 lbs. @ 120 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 0000 |
| 3/8" | 1/2" | 1/2" | 1/16" | 250 lbs. @ 120 rpm | 290 lbs. @ 120 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 000000 | 0000 |
| 3/8" | 5/8" | 1/2" | 1/16" | 310 lbs. @ 120 rpm | 290 lbs. @ 120 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 0000 |
| 3/8" | 3/4" | 1/2" | 1/16" | 370 lbs. @ 120 rpm | 290 lbs. @ 120 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 0000 |
Food Industry Oil-Embedded Flanged Sleeve Bearings
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
841 Bronze Bearings | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | |||||||||||
| 3/8" | 1/4" | 1/2" | 1/16" | 125 lbs. @ 120 rpm | 290 lbs. @ 120 rpm | Lubricated | ISO 100 Oil | -75° to 300° | NSF Registered H1 | 000000 | 00000 |
| 3/8" | 3/8" | 1/2" | 1/16" | 185 lbs. @ 120 rpm | 290 lbs. @ 120 rpm | Lubricated | ISO 100 Oil | -75° to 300° | NSF Registered H1 | 000000 | 0000 |
| 3/8" | 1/2" | 1/2" | 1/16" | 250 lbs. @ 120 rpm | 290 lbs. @ 120 rpm | Lubricated | ISO 100 Oil | -75° to 300° | NSF Registered H1 | 000000 | 0000 |
| 3/8" | 3/4" | 1/2" | 1/16" | 370 lbs. @ 120 rpm | 290 lbs. @ 120 rpm | Lubricated | ISO 100 Oil | -75° to 300° | NSF Registered H1 | 000000 | 0000 |
Oil-Embedded Flanged Sleeve Bearings with Certification
These bearings come with a traceable lot number and material test report. They are also known as Oilite® bearings; startup friction causes them to release a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bearing Bronze Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | ||||||||||
| 3/8" | 1/4" | 1/2" | 1/16" | 125 lbs. @ 120 rpm | 290 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 00000 |
| 3/8" | 3/8" | 1/2" | 1/16" | 185 lbs. @ 120 rpm | 290 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
| 3/8" | 1/2" | 1/2" | 1/16" | 250 lbs. @ 120 rpm | 290 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
High-Temperature Dry-Running Flanged Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
841 bronze bearings are porous and embedded with graphite for continuous lubrication. They handle higher temperatures than 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||||
|---|---|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | ||||||||
| 3/8" | 1/4" | 1/2" | 1/16" | 100 lbs. @ 120 rpm | 235 lbs. @ 120 rpm | -50° to 700° | 0000000 | 00000 |
| 3/8" | 3/8" | 1/2" | 1/16" | 150 lbs. @ 120 rpm | 235 lbs. @ 120 rpm | -50° to 700° | 0000000 | 0000 |
| 3/8" | 1/2" | 1/2" | 1/16" | 200 lbs. @ 120 rpm | 235 lbs. @ 120 rpm | -50° to 700° | 0000000 | 0000 |
| 3/8" | 3/4" | 1/2" | 1/16" | 300 lbs. @ 120 rpm | 235 lbs. @ 120 rpm | -50° to 700° | 0000000 | 0000 |
Multipurpose Flanged Sleeve Bearings
These leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 932 bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | PV Max. | Each | |
660 Leaded Bronze Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 5/32" Shaft Dia. | ||||||||||
| 3/8" | 3/8" | 7/16" | 1/16" | 230 lbs. @ 120 rpm | 520 lbs. @ 120 rpm | Required | -350° to 450° | __ | 00000000 | 00000 |
For 1/4" Shaft Dia. | ||||||||||
| 3/8" | 1/4" | 1/2" | 1/16" | 250 lbs. @ 120 rpm | 580 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 0000000 | 0000 |
| 3/8" | 3/8" | 1/2" | 1/16" | 370 lbs. @ 120 rpm | 580 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 0000000 | 0000 |
| 3/8" | 1/2" | 1/2" | 1/16" | 500 lbs. @ 120 rpm | 580 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 0000000 | 0000 |
| 3/8" | 3/4" | 1/2" | 1/16" | 750 lbs. @ 120 rpm | 580 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 0000000 | 0000 |
Corrosion-Resistant Flanged Sleeve Bearings
The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
954 Aluminum-Bronze Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | |||||||||
| 3/8" | 1/4" | 1/2" | 1/16" | 280 lbs. @ 120 rpm | 660 lbs. @ 120 rpm | Required | -350° to 500° | 000000 | 00000 |
| 3/8" | 3/8" | 1/2" | 1/16" | 420 lbs. @ 120 rpm | 660 lbs. @ 120 rpm | Required | -350° to 500° | 000000 | 0000 |
| 3/8" | 1/2" | 1/2" | 1/16" | 560 lbs. @ 120 rpm | 660 lbs. @ 120 rpm | Required | -350° to 500° | 000000 | 0000 |
| 3/8" | 3/4" | 1/2" | 1/16" | 840 lbs. @ 120 rpm | 660 lbs. @ 120 rpm | Required | -350° to 500° | 0000000 | 0000 |
Multipurpose Flanged Sleeve Bearings with Certification
Furnished with a traceable lot number and material test report, these leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 932 bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
660 Leaded Bronze Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | |||||||||
| 3/8" | 1/4" | 1/2" | 1/16" | 250 lbs. @ 120 rpm | 580 lbs. @ 120 rpm | Required | -70° to 450° | 000000000 | 00000 |
| 3/8" | 3/8" | 1/2" | 1/16" | 370 lbs. @ 120 rpm | 580 lbs. @ 120 rpm | Required | -70° to 450° | 000000000 | 0000 |
| 3/8" | 1/2" | 1/2" | 1/16" | 500 lbs. @ 120 rpm | 580 lbs. @ 120 rpm | Required | -70° to 450° | 000000000 | 00000 |