Clear All
System of Measurement System of Measurement |
|---|
|
Ball Bearing Type Ball Bearing Type |
|---|
 | Flanged |
Ring Material Ring Material |
|---|
|
For Housing ID For Housing ID |
|---|
|
Bearing Type Bearing Type |
|---|
 | Ball |
OD OD | Show |
|---|
|
OD OD | Hide |
|---|
Inner Ring Type Inner Ring Type |
|---|
 | Standard |
Ball Material Ball Material |
|---|
|
For Load Direction For Load Direction |
|---|
 | Radial |
For Shaft Type For Shaft Type |
|---|
 | Round |
Maximum Speed Maximum Speed |
|---|
|
Misalignment Capability Misalignment Capability |
|---|
|
ABEC Rating ABEC Rating |
|---|
|
Lubrication Lubrication |
|---|
|
Shaft Mount Type Shaft Mount Type |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
About Ball and Roller Bearings
More
Self-Aligning Flanged Ball Bearings
Open
Shielded
Sealed
No need to worry about precisely aligning these bearings—they swivel to compensate for up to 5° of shaft misalignment. The flange ensures proper positioning inside a tube or housing.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
Stainless steel bearings are more corrosion resistant than steel bearings.
For technical drawings and 3-D models, click on a part number.
Flange | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Dynamic | Static | Max. Speed, rpm | Lubrication | Misalignment Capability | Temp. Range, °F | ABEC Rating | Each | |
Open | |||||||||||||
Steel | |||||||||||||
| 3/16" | 21/32" | 9/32" | 0.69" | 0.03" | 65 | 25 | 40,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 00000000 | 000000 |
| 1/4" | 21/32" | 9/32" | 0.69" | 0.03" | 65 | 25 | 40,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 00000000 | 00000 |
| 5/16" | 21/32" | 9/32" | 0.69" | 0.03" | 65 | 25 | 40,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 00000000 | 00000 |
440C Stainless Steel | |||||||||||||
| 1/4" | 21/32" | 9/32" | 0.69" | 0.03" | 55 | 20 | 40,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 00000000 | 00000 |
| 5/16" | 21/32" | 9/32" | 0.69" | 0.03" | 55 | 20 | 40,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 00000000 | 00000 |
Shielded | |||||||||||||
Steel | |||||||||||||
| 3/16" | 21/32" | 9/32" | 0.69" | 0.03" | 120 | 60 | 40,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 000000 | 00000 |
| 1/4" | 21/32" | 9/32" | 0.69" | 0.03" | 120 | 60 | 40,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 000000 | 00000 |
| 5/16" | 21/32" | 9/32" | 0.69" | 0.03" | 120 | 60 | 40,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 000000 | 00000 |
440C Stainless Steel | |||||||||||||
| 1/4" | 21/32" | 9/32" | 0.69" | 0.03" | 55 | 20 | 40,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 00000000 | 00000 |
| 5/16" | 21/32" | 9/32" | 0.69" | 0.03" | 55 | 20 | 40,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 00000000 | 00000 |
Sealed | |||||||||||||
Steel | |||||||||||||
| 1/8" | 21/32" | 9/32" | 0.69" | 0.03" | 65 | 25 | 20,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 00000000 | 00000 |
| 3/16" | 21/32" | 9/32" | 0.69" | 0.03" | 65 | 25 | 20,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 00000000 | 00000 |
| 1/4" | 21/32" | 9/32" | 0.69" | 0.03" | 65 | 25 | 20,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 00000000 | 00000 |
| 5/16" | 21/32" | 9/32" | 0.69" | 0.03" | 65 | 25 | 20,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 00000000 | 00000 |
440C Stainless Steel | |||||||||||||
| 1/4" | 21/32" | 9/32" | 0.69" | 0.03" | 55 | 20 | 20,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 00000000 | 00000 |
| 5/16" | 21/32" | 9/32" | 0.69" | 0.03" | 55 | 20 | 20,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 00000000 | 00000 |