Filter by
OD
Plain Bearing Type
System of Measurement
Shaft Mount Type
Lubrication
For Load Direction
Bearing Type
Dynamic Radial Load Capacity @ Speed
Maximum Temperature
Shaft Type
Performance
Minimum Temperature
DFARS Specialty Metals
Export Control Classification Number (ECCN)
RoHS
REACH
Base Oil
Lubrication Method
Oil-Embedded Flanged Sleeve Bearings
![]() |
Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
Certificate | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Lg. | Flange OD | Flange Thk. | Dynamic Radial Load Cap. @ Speed | Dynamic Thrust Load Cap. @ Speed | Base Oil | Temp. Range, ° F | Type | Form | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
841 Bearing Bronze | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 1/2" | 1 1/8" | 1/8" | 620 lb. @ 60 rpm | 1,350 lb. @ 60 rpm | Synthetic Oil | -35 to 300 | — | — | 6338K427 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 5/8" | 1 1/8" | 1/8" | 780 lb. @ 60 rpm | 1,350 lb. @ 60 rpm | Synthetic Oil | -35 to 300 | — | — | 6338K473 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 3/4" | 1 1/8" | 1/8" | 930 lb. @ 60 rpm | 1,350 lb. @ 60 rpm | Synthetic Oil | -35 to 300 | — | — | 6338K428 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 1" | 1 1/8" | 1/8" | 1,250 lb. @ 60 rpm | 1,350 lb. @ 60 rpm | Synthetic Oil | -35 to 300 | — | — | 6338K475 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 1 1/4" | 1 1/8" | 1/8" | 1,550 lb. @ 60 rpm | 1,350 lb. @ 60 rpm | Synthetic Oil | -35 to 300 | — | — | 6338K477 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 1 1/4" | 1 1/4" | 1/8" | 1,550 lb. @ 60 rpm | 1,800 lb. @ 60 rpm | Synthetic Oil | -35 to 300 | — | — | 6338K478 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 7/8" | 1/2" | 1 1/8" | 1/8" | 750 lb. @ 60 rpm | 1,100 lb. @ 60 rpm | Synthetic Oil | -35 to 300 | — | — | 6338K429 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 7/8" | 1/2" | 1 1/8" | 1/8" | 750 lb. @ 60 rpm | 1,100 lb. @ 60 rpm | Synthetic Oil | -35 to 300 | Material Certificate | Paper | 3113K65 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 7/8" | 1/2" | 1 1/4" | 1/8" | 750 lb. @ 60 rpm | 1,550 lb. @ 60 rpm | Synthetic Oil | -35 to 300 | — | — | 6338K467 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 7/8" | 3/4" | 1 1/8" | 1/8" | 1,100 lb. @ 60 rpm | 1,100 lb. @ 60 rpm | Synthetic Oil | -35 to 300 | — | — | 6338K472 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 7/8" | 3/4" | 1 1/4" | 1/8" | 1,100 lb. @ 60 rpm | 1,550 lb. @ 60 rpm | Synthetic Oil | -35 to 300 | — | — | 6338K474 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
High-Strength 863 Iron Copper | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 1/2" | 1 1/8" | 1/8" | 1,100 lb. @ 60 rpm | 1,350 lb. @ 60 rpm | Synthetic Oil | -15 to 300 | — | — | 2938T46 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 5/8" | 1 1/8" | 1/8" | 1,350 lb. @ 60 rpm | 1,350 lb. @ 60 rpm | Synthetic Oil | -15 to 300 | — | — | 2938T47 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 3/4" | 1 1/8" | 1/8" | 1,650 lb. @ 60 rpm | 1,350 lb. @ 60 rpm | Synthetic Oil | -15 to 300 | — | — | 2938T48 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 1" | 1 1/8" | 1/8" | 2,200 lb. @ 60 rpm | 1,350 lb. @ 60 rpm | Synthetic Oil | -15 to 300 | — | — | 2938T49 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 1 1/4" | 1 1/8" | 1/8" | 2,750 lb. @ 60 rpm | 1,350 lb. @ 60 rpm | Synthetic Oil | -15 to 300 | — | — | 2938T51 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 1 1/4" | 1 1/4" | 1/8" | 2,750 lb. @ 60 rpm | 1,600 lb. @ 60 rpm | Synthetic Oil | -15 to 300 | — | — | 2938T52 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 7/8" | 1/2" | 1 1/8" | 1/8" | 1,100 lb. @ 60 rpm | 1,050 lb. @ 60 rpm | Synthetic Oil | -15 to 300 | — | — | 2938T53 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 7/8" | 1/2" | 1 1/4" | 1/8" | 1,100 lb. @ 60 rpm | 1,400 lb. @ 60 rpm | Synthetic Oil | -15 to 300 | — | — | 2938T19 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 7/8" | 3/4" | 1 1/8" | 1/8" | 1,650 lb. @ 60 rpm | 1,050 lb. @ 60 rpm | Synthetic Oil | -15 to 300 | — | — | 2938T54 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 7/8" | 3/4" | 1 1/4" | 1/8" | 1,650 lb. @ 60 rpm | 1,400 lb. @ 60 rpm | Synthetic Oil | -15 to 300 | — | — | 2938T21 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Oil-Embedded Sleeve Bearings
![]() |
Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in
electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t
afford the mess. All are fabricated, lubricated, and inspected in the U.S.
With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
Mineral Oil Base—Mineral oil consistently lubricates at most temperatures but doesn’t last as long as synthetic oil.
Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
For Shaft Dia. | For Housing ID | Lg. | Dynamic Radial Load Cap. @ Speed | Base Oil | Temp. Range, ° F | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
841 Bearing Bronze | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/2" | 7/8" | 1/2" | 500 lb. @ 120 rpm | Synthetic Oil | -35 to 300 | 6391K628 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/2" | 7/8" | 3/4" | 750 lb. @ 120 rpm | Synthetic Oil | -35 to 300 | 6391K745 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/2" | 7/8" | 1" | 1,000 lb. @ 120 rpm | Synthetic Oil | -35 to 300 | 6391K629 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/2" | 7/8" | 1 1/4" | 1,250 lb. @ 120 rpm | Synthetic Oil | -35 to 300 | 6391K744 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/2" | 7/8" | 1 1/2" | 1,500 lb. @ 120 rpm | Synthetic Oil | -35 to 300 | 6391K746 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 1 5/8" | 2,000 lb. @ 60 rpm | Mineral Oil | 10 to 220 | 6391K364 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 2" | 2,500 lb. @ 60 rpm | Mineral Oil | 10 to 220 | 6391K365 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
11/16" | 7/8" | 1 1/8" | 1,500 lb. @ 60 rpm | Mineral Oil | 10 to 220 | 6391K368 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
11/16" | 7/8" | 1 1/4" | 1,700 lb. @ 60 rpm | Mineral Oil | 10 to 220 | 6391K369 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 7/8" | 1 5/8" | 2,400 lb. @ 60 rpm | Mineral Oil | 10 to 220 | 6391K372 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Ultra-Low-Friction Oil-Embedded Sleeve Bearings
![]() |
Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
For Shaft Dia. | For Housing ID | Lg. | Dynamic Radial Load Cap. @ Speed | Base Oil | Lubricant Additive | Temp. Range, ° F | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
841 Bearing Bronze | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/2" | 7/8" | 1/2" | 490 lb. @ 120 rpm | Synthetic Oil | PTFE | -40 to 460 | 1688K343 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 1/2" | 620 lb. @ 60 rpm | Synthetic Oil | PTFE | -40 to 460 | 1688K348 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 3/4" | 930 lb. @ 60 rpm | Synthetic Oil | PTFE | -40 to 460 | 1688K349 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 1" | 1,200 lb. @ 60 rpm | Synthetic Oil | PTFE | -40 to 460 | 1688K351 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 1 1/2" | 1,850 lb. @ 60 rpm | Synthetic Oil | PTFE | -40 to 460 | 1688K352 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 7/8" | 1/2" | 740 lb. @ 60 rpm | Synthetic Oil | PTFE | -40 to 460 | 1688K355 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 7/8" | 3/4" | 1,100 lb. @ 60 rpm | Synthetic Oil | PTFE | -40 to 460 | 1688K356 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 7/8" | 1" | 1,500 lb. @ 60 rpm | Synthetic Oil | PTFE | -40 to 460 | 1688K25 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 7/8" | 1 1/4" | 1,850 lb. @ 60 rpm | Synthetic Oil | PTFE | -40 to 460 | 1688K357 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 7/8" | 1 1/2" | 2,200 lb. @ 60 rpm | Synthetic Oil | PTFE | -40 to 460 | 1688K358 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
![]() |
Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
For Shaft Dia. | For Housing ID | Lg. | Flange OD | Flange Thk. | Dynamic Radial Load Cap. @ Speed | Dynamic Thrust Load Cap. @ Speed | Base Oil | Lubricant Additive | Temp. Range, ° F | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
841 Bearing Bronze | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 1/2" | 1 1/8" | 1/8" | 620 lb. @ 60 rpm | 1,350 lb. @ 60 rpm | Synthetic Oil | PTFE | -140 to 460 | 1677K357 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 5/8" | 1 1/8" | 1/8" | 780 lb. @ 60 rpm | 1,350 lb. @ 60 rpm | Synthetic Oil | PTFE | -140 to 460 | 1677K358 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 3/4" | 1 1/8" | 1/8" | 930 lb. @ 60 rpm | 1,350 lb. @ 60 rpm | Synthetic Oil | PTFE | -140 to 460 | 1677K359 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 1" | 1 1/8" | 1/8" | 1,250 lb. @ 60 rpm | 1,350 lb. @ 60 rpm | Synthetic Oil | PTFE | -140 to 460 | 1677K361 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 1 1/4" | 1 1/8" | 1/8" | 1,550 lb. @ 60 rpm | 1,350 lb. @ 60 rpm | Synthetic Oil | PTFE | -140 to 460 | 1677K362 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 7/8" | 1/2" | 1 1/8" | 1/8" | 750 lb. @ 60 rpm | 1,050 lb. @ 60 rpm | Synthetic Oil | PTFE | -140 to 460 | 1677K15 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 7/8" | 3/4" | 1 1/8" | 1/8" | 1,100 lb. @ 60 rpm | 1,100 lb. @ 60 rpm | Synthetic Oil | PTFE | -140 to 460 | 1677K16 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
High-Temperature Graphite-Lubricated Sleeve Bearings
![]() |
Made of a graphite and metal alloy, these bearings stay slippery at high temperatures where oil burns off and other bearings fail. With no need for refills, they require little to no maintenance. You’ll find them in pumps, propellers, and mixers that spin near steam or inside ovens. However, graphite may eventually flake off, dropping flecks and leaving smudges. If you need a spic-and-span space, consider dry-running bearings made of slippery plastic instead. All are fabricated, lubricated, and inspected in the U.S.
With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
For Shaft Dia. | For Housing ID | Lg. | Dynamic Radial Load Cap. @ Speed | Temp. Range, ° F | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
841 Bearing Bronze | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 5/8" | 620 lb. @ 60 rpm | -50 to 700 | 9368T182 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 3/4" | 750 lb. @ 60 rpm | -50 to 700 | 9368T68 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 1" | 1,000 lb. @ 60 rpm | -50 to 700 | 9368T69 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 1 1/2" | 1,500 lb. @ 60 rpm | -50 to 700 | 9368T183 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 1 3/4" | 1,750 lb. @ 60 rpm | -50 to 700 | 9368T184 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 7/8" | 1/2" | 600 lb. @ 60 rpm | -50 to 700 | 9368T71 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 7/8" | 5/8" | 750 lb. @ 60 rpm | -50 to 700 | 9368T187 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 7/8" | 3/4" | 900 lb. @ 60 rpm | -50 to 700 | 9368T72 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 7/8" | 1" | 1,200 lb. @ 60 rpm | -50 to 700 | 9368T73 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 7/8" | 1 1/4" | 1,500 lb. @ 60 rpm | -50 to 700 | 9368T188 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 7/8" | 1 1/2" | 1,800 lb. @ 60 rpm | -50 to 700 | 9368T189 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
High-Temperature Graphite-Lubricated Flanged Sleeve Bearings
![]() |
Made of a graphite and metal alloy, these bearings stay slippery at high temperatures where oil burns off and other bearings fail. With no need for refills, they require little to no maintenance. You’ll find them in pumps, propellers, and mixers that spin near steam or inside ovens. However, graphite may eventually flake off, dropping flecks and leaving smudges. If you need a spic-and-span space, consider dry-running bearings made of slippery plastic instead. All are fabricated, lubricated, and inspected in the U.S.
Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
For Shaft Dia. | For Housing ID | Lg. | Flange OD | Flange Thk. | Dynamic Radial Load Cap. @ Speed | Dynamic Thrust Load Cap. @ Speed | Temp. Range, ° F | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
841 Bearing Bronze | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 1/2" | 1 1/8" | 1/8" | 500 lb. @ 60 rpm | 1,050 lb. @ 60 rpm | -50 to 700 | 9440T42 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 5/8" | 1 1/8" | 1/8" | 620 lb. @ 60 rpm | 1,050 lb. @ 60 rpm | -50 to 700 | 9440T59 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 3/4" | 1 1/8" | 1/8" | 750 lb. @ 60 rpm | 1,050 lb. @ 60 rpm | -50 to 700 | 9440T43 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 1" | 1 1/8" | 1/8" | 1,000 lb. @ 60 rpm | 1,050 lb. @ 60 rpm | -50 to 700 | 9440T44 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 1 1/4" | 1 1/8" | 1/8" | 1,250 lb. @ 60 rpm | 1,050 lb. @ 60 rpm | -50 to 700 | 9440T64 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 7/8" | 1/2" | 1 1/8" | 1/8" | 600 lb. @ 60 rpm | 880 lb. @ 60 rpm | -50 to 700 | 9440T27 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 7/8" | 3/4" | 1 1/8" | 1/8" | 900 lb. @ 60 rpm | 880 lb. @ 60 rpm | -50 to 700 | 9440T28 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Oil-Embedded Flanged Sleeve Bearings for Food and Beverage
![]() |
These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for incidental contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for direct contact with food, consider dry-running flanged sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.
Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
For Shaft Dia. | For Housing ID | Lg. | Flange OD | Flange Thk. | Dynamic Radial Load Cap. @ Speed | Dynamic Thrust Load Cap. @ Speed | Base Oil | Temp. Range, ° F | Specs. Met | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
841 Bearing Bronze | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 7/8" | 1/2" | 1 1/8" | 1/8" | 750 lb. @ 60 rpm | 1,100 lb. @ 60 rpm | Synthetic Oil | -75 to 300 | FDA Compliant 21 CFR 178.3570 | 3746K24 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
High-Strength 863 Iron Copper | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 7/8" | 1/2" | 1 1/8" | 1/8" | 1,100 lb. @ 60 rpm | 1,050 lb. @ 60 rpm | Synthetic Oil | -75 to 300 | FDA Compliant 21 CFR 178.3570 | 3083K24 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Dry-Running Flanged Sleeve Bearings for Food and Beverage
![]() |
Made of plastics permitted by the US FDA for contact with food, these bearings won’t release harmful, smelly, and distasteful impurities into your food or beverage production line. These self-lubricating plastics eliminate the need for oil, resulting in less maintenance and improved hygiene. You’ll find them inside food-processing equipment such as mixers, conveyors, and fillers.
Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
Ultra-Low-Friction Rulon 641—Get effortless motion with strength surpassing UHMW polyethylene. Rulon 641 bearings can also operate from cryogenic to oven-like temperatures.
For Shaft Dia. | For Housing ID | Lg. | Flange OD | Flange Thk. | Dynamic Radial Load Cap. @ Speed | Dynamic Thrust Load Cap. @ Speed | Color | Temp. Range, ° F | Specs. Met | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Ultra-Low-Friction Rulon 641 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5/8" | 7/8" | 3/4" | 1" | 1/8" | 460 lb. @ 60 rpm | 300 lb. @ 60 rpm | White | -400 to 550 | FDA Compliant 21 CFR 177.1550, USP Class VI | 6371K124 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" | 7/8" | 1" | 1 1/8" | 1/16" | 630 lb. @ 60 rpm | 310 lb. @ 60 rpm | White | -400 to 550 | FDA Compliant 21 CFR 177.1550, USP Class VI | 6371K128 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||