About Plain Bearings
More
High-Load Oil-Embedded Flanged Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes these bearings to release a thin layer of oil onto their surface. Color is silver because of the iron.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||||||
| 1" | 1" | 1 1/4" | 3/16" | 2,200 lbs. @ 60 rpm | 1,600 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 00000 |
For 7/8" Shaft Dia. | ||||||||||
| 1" | 1/2" | 1 1/4" | 3/16" | 1,100 lbs. @ 60 rpm | 1,100 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 0000 |
| 1" | 1" | 1 1/4" | 3/16" | 2,200 lbs. @ 60 rpm | 1,100 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 0000 |
Food Industry Dry-Running Flanged Sleeve Bearings
Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
UHMW Plastic Bearings  | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | ||||||||||
| 1" | 3/4" | 1 1/4" | 5/32" | 95 lbs. @ 60 rpm | 75 lbs. @ 60 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 000000000 | 000000 |
| 1" | 3/4" | 1 1/4" | 3/16" | 95 lbs. @ 60 rpm | 75 lbs. @ 60 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 00000000 | 00000 |
| 1" | 1" | 1 3/16" | 1/16" | 125 lbs. @ 60 rpm | 70 lbs. @ 60 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 000000000 | 00000 |
| 1" | 1" | 1 3/16" | 1/8" | 125 lbs. @ 60 rpm | 70 lbs. @ 60 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 00000000 | 00000 |
| 1" | 1" | 1 1/4" | 5/32" | 125 lbs. @ 60 rpm | 75 lbs. @ 60 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 000000000 | 00000 |