McMaster-Carr logo
    Filter by
    Shaft Diameter
    Attribute Image
    OD
    Attribute Image
    Plain Bearing Type
    For Housing ID
    Attribute Image
    System of Measurement
    Shaft Mount Type
    Flange OD
    Attribute Image
    Lubrication
    Flange Thickness
    Bearing Type
    Shaft Type
    Lubricant
    Lubrication Method
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    38 Products

    Ultra-Low-Friction Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Ultra-Low-Friction Oil-Embedded Sleeve Bearings.
    Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    3/4"1 1/4"1"1,450 lb. @ 60 rpmSynthetic OilPTFE
    		-40 to 4601688K365000000
    3/4"1 1/4"1 1/2"2,200 lb. @ 60 rpmSynthetic OilPTFE
    		-40 to 4601688K36600000
    1"1 1/4"1/2"990 lb. @ 60 rpmSynthetic OilPTFE
    		-40 to 4601688K3670000
    1"1 1/4"3/4"1,450 lb. @ 60 rpmSynthetic OilPTFE
    		-40 to 4601688K3680000
    1"1 1/4"1"1,950 lb. @ 60 rpmSynthetic OilPTFE
    		-40 to 4601688K3690000
    1"1 1/4"1 1/4"2,450 lb. @ 60 rpmSynthetic OilPTFE
    		-40 to 4601688K3710000
    1"1 1/4"1 1/2"3,000 lb. @ 60 rpmSynthetic OilPTFE
    		-40 to 4601688K270000
    1"1 1/4"1 3/4"3,450 lb. @ 60 rpmSynthetic OilPTFE
    		-40 to 4601688K3720000
    1"1 1/4"2"1,950 lb. @ 60 rpmSynthetic OilPTFE
    		-40 to 4601688K37300000
    1"1 1/4"2 1/2"4,950 lb. @ 60 rpmSynthetic OilPTFE
    		-40 to 4601688K37400000
    1"1 1/4"3"1,950 lb. @ 60 rpmSynthetic OilPTFE
    		-40 to 4601688K37500000
     

    High-Temperature Graphite-Lubricated Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. High-Temperature Graphite-Lubricated Sleeve Bearings.
    Made of a graphite and metal alloy, these bearings stay slippery at high temperatures where oil burns off and other bearings fail. With no need for refills, they require little to no maintenance. You’ll find them in pumps, propellers, and mixers that spin near steam or inside ovens. However, graphite may eventually flake off, dropping flecks and leaving smudges. If you need a spic-and-span space, consider dry-running bearings made of slippery plastic instead. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    3/4"1 1/4"1"1,200 lb. @ 60 rpm-50 to 7009368T198000000
    1"1 1/4"1/2"800 lb. @ 60 rpm-50 to 7009368T820000
    1"1 1/4"3/4"1,200 lb. @ 60 rpm-50 to 7009368T830000
    1"1 1/4"1"1,600 lb. @ 60 rpm-50 to 7009368T340000
    1"1 1/4"1 1/4"2,000 lb. @ 60 rpm-50 to 7009368T840000
    1"1 1/4"1 1/2"2,400 lb. @ 60 rpm-50 to 7009368T850000
    1"1 1/4"2"3,200 lb. @ 60 rpm-50 to 7009368T8600000
    1"1 1/4"2 1/4"3,600 lb. @ 60 rpm-50 to 7009368T20500000
    1"1 1/4"2 1/2"4,000 lb. @ 60 rpm-50 to 7009368T20600000
    1"1 1/4"3"4,800 lb. @ 60 rpm-50 to 7009368T20700000
     

    Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings.
    Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    1"1 1/4"3/4"1 1/2"1/8"1,500 lb. @ 60 rpm1,950 lb. @ 60 rpmSynthetic OilPTFE
    		-140 to 4601677K1900000
    1"1 1/4"1"1 1/2"1/8"2,000 lb. @ 60 rpm1,950 lb. @ 60 rpmSynthetic OilPTFE
    		-140 to 4601677K210000
    1"1 1/4"1 1/4"1 1/2"1/8"2,500 lb. @ 60 rpm1,950 lb. @ 60 rpmSynthetic OilPTFE
    		-140 to 4601677K3840000
    1"1 1/4"1 1/2"1 1/2"1/8"3,000 lb. @ 60 rpm1,950 lb. @ 60 rpmSynthetic OilPTFE
    		-140 to 4601677K38500000
     

    High-Temperature Graphite-Lubricated Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. High-Temperature Graphite-Lubricated Flanged Sleeve Bearings.
    Made of a graphite and metal alloy, these bearings stay slippery at high temperatures where oil burns off and other bearings fail. With no need for refills, they require little to no maintenance. You’ll find them in pumps, propellers, and mixers that spin near steam or inside ovens. However, graphite may eventually flake off, dropping flecks and leaving smudges. If you need a spic-and-span space, consider dry-running bearings made of slippery plastic instead. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    1"1 1/4"3/4"1 1/2"1/8"1,200 lb. @ 60 rpm1,550 lb. @ 60 rpm-50 to 7009440T3400000
    1"1 1/4"1"1 1/2"1/8"1,600 lb. @ 60 rpm1,550 lb. @ 60 rpm-50 to 7009440T350000
    1"1 1/4"1 1/4"1 1/2"1/8"2,000 lb. @ 60 rpm1,550 lb. @ 60 rpm-50 to 7009440T470000
    1"1 1/4"1 1/2"1 1/2"1/8"2,400 lb. @ 60 rpm1,550 lb. @ 60 rpm-50 to 7009440T4800000
     

    Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Oil-Embedded Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Mineral Oil Base—Mineral oil consistently lubricates at most temperatures but doesn’t last as long as synthetic oil.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    7/8"1 1/4"3/4"1,300 lb. @ 60 rpmMineral Oil10 to 2206391K38800000
    7/8"1 1/4"1 3/8"2,400 lb. @ 60 rpmMineral Oil10 to 2206391K390000
    15/16"1 1/4"1"1,850 lb. @ 60 rpmSynthetic Oil-35 to 3006391K8220000
    15/16"1 1/4"1 1/4"2,300 lb. @ 60 rpmMineral Oil10 to 2206391K5390000
    15/16"1 1/4"1 1/2"2,800 lb. @ 60 rpmSynthetic Oil-35 to 3006391K64800000
     

    Oil-Embedded Flanged Sleeve Bearings for Food and Beverage

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings for Food and Beverage.
    These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for incidental contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for direct contact with food, consider dry-running flanged sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Specs. Met
    Each
    841 Bearing Bronze
    1"1 1/4"3/4"1 1/2"1/8"1,500 lb. @ 60 rpm1,950 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35703746K3100000
    1"1 1/4"1"1 1/2"1/8"2,000 lb. @ 60 rpm1,950 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35703746K320000
     

    Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    High-Strength 863 Iron Copper
    1"1 1/4"3/4"1 1/2"3/16"1,650 lb. @ 60 rpm1,450 lb. @ 60 rpmSynthetic Oil-15 to 3002938T70800000
    1"1 1/4"1"1 1/2"3/16"2,200 lb. @ 60 rpm1,450 lb. @ 60 rpmSynthetic Oil-15 to 3002938T7090000
     
    back to top