About Plain Bearings
More
Light Duty Dry-Running Thrust Bearings
Use where high loads and speeds are not required.
Thermoplastic bearings are fiber reinforced and lubricant infused for good wear resistance and low friction with light and medium loads.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| OD | Thick. | Dynamic Thrust Load Capacity | Color | Temp. Range, °F | Each | |
Thermoplastic Blend Bearings | ||||||
|---|---|---|---|---|---|---|
For 10 mm Shaft Dia. | ||||||
| 17.8mm | 0.5mm | 28 lbs. @ 120 rpm | Gray | -40° to 260° | 0000000 | 00000 |
Ultra-Low-Friction Dry-Running Thrust Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
PTFE bearings have good chemical resistance.
Rulon J bearings create the least amount of friction of any bearing that we offer. They handle heavier loads than PTFE bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
| OD | Thick. | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
PTFE Plastic Bearings  | ||||||
|---|---|---|---|---|---|---|
For 10mm Shaft Dia. | ||||||
| 17.8mm | 1.5mm | 4.5 lbs. @ 120 rpm | White | -450° to 500° | 0000000 | 000000 |
| 17.8mm | 2mm | 4.5 lbs. @ 120 rpm | White | -450° to 500° | 0000000 | 00000 |
Rulon J Plastic Bearings | ||||||
For 10mm Shaft Dia. | ||||||
| 17.8mm | 1.5mm | 85 lbs. @ 120 rpm | Gold | -400° to 550° | 0000000 | 00000 |
| 17.8mm | 2mm | 85 lbs. @ 120 rpm | Gold | -400° to 550° | 0000000 | 00000 |
Food Industry Dry-Running Thrust Bearings
Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.
Rulon 641 bearings are stronger than UHMW bearings and withstand a wider range of temperatures.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| OD, mm | Thick., mm | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
For 10 mm Shaft Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 17.8 | 1.5 | 115 lbs. @ 120 rpm | White | -400° to 550° | FDA Compliant 21 CFR 177.1550, USP Class VI | 0000000 | 000000 |
| 17.8 | 2 | 115 lbs. @ 120 rpm | White | -400° to 550° | FDA Compliant 21 CFR 177.1550, USP Class VI | 0000000 | 00000 |