McMaster-Carr logo
    Filter by
    System of Measurement
    Shaft Diameter
    Attribute Image
    OD
    Attribute Image
    Plain Bearing Type
    Material
    For Housing ID
    Attribute Image
    Shaft Mount Type
    Bearing Type
    Shaft Type
    Flange Thickness
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    25 Products

    Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Flanged Sleeve Bearings.
    These bearings don’t come with a lubricant, so you can select the oil that meets the needs of your application. You’ll need to refill the oil, so make sure the bearing is located where you can access it. All are fabricated and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    High-Load 932 Bearing Bronze—These bearings are strong enough for sudden starts and stops, plus they resist wear and tear. They are cast from an alloy of leaded tin bronze for uniform rigidity and strength. Also known as 660 leaded bronze bearings.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    High-Load 932 Bearing Bronze
    1 3/4"2 1/4"2 1/2"3"1/4"17,500 lb. @ 30 rpm14,800 lb. @ 30 rpm-350 to 4500000000000000
    2"2 1/4"3/4"2 1/2"1/8"6,000 lb. @ 30 rpm6,750 lb. @ 30 rpm-350 to 4500000000000000
    2"2 1/4"1 1/4"3 1/2"1/8"10,000 lb. @ 30 rpm17,650 lb. @ 30 rpm-350 to 4500000000000000
    2"2 1/4"2"4 1/2"1/8"16,000 lb. @ 30 rpm27,050 lb. @ 30 rpm-350 to 450000000000000
     

    Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Extreme-Load Heat-Treated Iron Copper—Our strongest oil-embedded flanged sleeve bearings. They’re heat treated to form a uniform internal grain that makes them stronger than 863 iron copper. As a result, they’re often used to support extreme loads in earth-moving equipment and railroad applications. The increased iron content makes these bearings appear silver.
    Mineral Oil Base—Mineral oil consistently lubricates at most temperatures but doesn’t last as long as synthetic oil.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    High-Load 863 Iron Copper
    1 3/4"2 1/4"2 1/2"3"1/4"11,100 lb. @ 30 rpm6,900 lb. @ 30 rpmSynthetic Oil-15 to 3000000000000000
     
    Extreme-Load Heat-Treated Iron Copper
    1 3/4"2 1/4"2 1/2"3"1/4"23,850 lb. @ 30 rpm14,800 lb. @ 30 rpmMineral Oil10 to 220000000000000
    2"2 1/4"2"2 1/2"1/8"19,050 lb. @ 30 rpm6,750 lb. @ 30 rpmMineral Oil10 to 220000000000000
     

    Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Oil-Embedded Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Extreme-Load Heat-Treated Iron Copper—Our strongest oil-embedded sleeve bearings. They’re heat treated to form a uniform internal grain that makes them stronger than 863 iron copper. As a result, they’re often used to support extreme loads in earth-moving equipment and railroad applications. The increased iron content makes these bearings appear silver.
    Mineral Oil Base—Mineral oil consistently lubricates at most temperatures but doesn’t last as long as synthetic oil.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    High-Load 863 Iron Copper
    2"2 1/4"2"8,900 lb. @ 30 rpmSynthetic Oil-15 to 30000000000000000
    2"2 1/4"2 1/2"11,100 lb. @ 30 rpmSynthetic Oil-15 to 3000000000000000
    2"2 1/4"4"17,800 lb. @ 30 rpmSynthetic Oil-15 to 30000000000000000
     
    Extreme-Load Heat-Treated Iron Copper
    2"2 1/4"1"9,500 lb. @ 30 rpmMineral Oil10 to 350000000000000
    2"2 1/4"2"19,050 lb. @ 30 rpmMineral Oil10 to 350000000000000
     

    Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Sleeve Bearings.
    These bearings don’t come with a lubricant, so you can select the oil that meets the needs of your application. You’ll need to refill the oil, so make sure the bearing is located where you can access it. All are fabricated and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    High-Load 932 Bearing Bronze—These bearings are strong enough for sudden starts and stops, plus they resist wear and tear. They are cast from an alloy of leaded tin bronze for uniform rigidity and strength. Also known as 660 leaded bronze bearings.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    High-Load 932 Bearing Bronze
    1 1/2"2 1/4"3"18,000 lb. @ 30 rpm-350 to 45000000000000000
    1 3/4"2 1/4"1 3/4"12,250 lb. @ 30 rpm-350 to 4500000000000000
    2"2 1/4"2"16,000 lb. @ 30 rpm-350 to 4500000000000000
    2"2 1/4"2 1/2"20,000 lb. @ 30 rpm-350 to 4500000000000000
    2"2 1/4"4"32,000 lb. @ 30 rpm-350 to 450000000000000
     

    Grooved Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Grooved Sleeve Bearings.
    A figure-8-shaped groove provides a flow path for lubricant and distributes it evenly inside the bearing’s surface. A refill hole on the outside lets you inject your lubricant straight into the groove. These bearings don’t come with a lubricant, so you can select the oil that meets the needs of your application. You’ll need to refill the oil, so make sure the bearing is located where you can access it. All are fabricated and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    High-Load 932 Bearing Bronze—These bearings are strong enough for sudden starts and stops, plus they resist wear and tear. They are cast from an alloy of leaded tin bronze for uniform rigidity and strength. Also known as 660 leaded bronze bearings.
    High-Load Chemical-Resistant 954 Bearing Bronze—The strongest of our bronze bearings. The addition of iron and aluminum makes them exceptionally strong and resistant to chemicals. They’re often used in the most demanding environments, such as salt mines. Also known as aluminum bronze.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    High-Load 932 Bearing Bronze
    1 1/2"2 1/4"3"15,750 lb. @ 30 rpm-350 to 4500000000000000
    1 3/4"2 1/4"1 3/4"10,700 lb. @ 30 rpm-350 to 450000000000000
    2"2 1/4"2"14,000 lb. @ 30 rpm-350 to 450000000000000
    2"2 1/4"2 1/2"17,500 lb. @ 30 rpm-350 to 450000000000000
     
    High-Load Chemical-Resistant 954 Bearing Bronze
    2"2 1/4"2"15,600 lb. @ 30 rpm-350 to 500000000000000
    2"2 1/4"2 1/2"19,500 lb. @ 30 rpm-350 to 500000000000000
     

    High-Temperature Graphite-Lubricated Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. High-Temperature Graphite-Lubricated Sleeve Bearings.
    Made of a graphite and metal alloy, these bearings stay slippery at high temperatures where oil burns off and other bearings fail. With no need for refills, they require little to no maintenance. You’ll find them in pumps, propellers, and mixers that spin near steam or inside ovens. However, graphite may eventually flake off, dropping flecks and leaving smudges. If you need a spic-and-span space, consider dry-running bearings made of slippery plastic instead. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    High-Load Chemical-Resistant 954 Bearing Bronze—The strongest of our bronze bearings. The addition of iron and aluminum makes them exceptionally strong and resistant to chemicals. They’re often used in the most demanding environments, such as salt mines. Also known as aluminum bronze.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    High-Load Chemical-Resistant 954 Bearing Bronze
    2"2 1/4"2"15,600 lb. @ 30 rpm-350 to 5000000000000000
    2"2 1/4"2 1/2"19,500 lb. @ 30 rpm-350 to 500000000000000
     
    back to top