These steel ball bearings handle higher loads than stainless steel and plastic bearings.

For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.

Internal locking elements (sprags) lock to transmit torque in one direction while turning freely in the other direction.

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Bearings are 440C stainless steel.

Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and race that eliminates the need for additional lubrication.

Made of slippery plastic, these bearings do not require lubrication and have excellent corrosion and chemical resistance.

Flanged and creating twice as many contact points as angular-contact ball bearings, these bearings ensure correct positioning within a tube or housing and resist radial loads.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.

A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface.

Use where high loads and speeds are not required.

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together.

The choice for low-friction motion in high-temperature environments.

Because they usually do not require lubrication, linear sleeve bearings outperform linear ball bearings in dirty environments.

A ceramic liner makes high speeds as well as rapid acceleration and deceleration possible.

Ball bearings create less friction than sleeve bearings, so they require less force to operate.

Made of FDA-listed materials for use in food applications, these bearings also have excellent chemical and corrosion resistance.

Also known as spherical bearings, swivel joints support angular misalignment. Press them into a hole or housing where a ball joint rod end won’t fit.

A slippery PTFE liner reduces wear and eliminates the need for lubrication.

Also known as jig bushings, these metric drill bushings fit inside fixture plate holes to guide drill bits, counterbores, reamers, and other cutting tools. They improve accuracy so that your drilled holes and cuts are consistent from part to part.

With a nylon insert that grips your threaded shaft or spindle without damaging its threads, these locknuts—also called shaft nuts—hold bearings, bushings, gears, and pulleys prone to vibration tightly in place.