A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.

Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and race that eliminates the need for additional lubrication.

Made of slippery plastic, these bearings do not require lubrication and have excellent corrosion and chemical resistance.

Made of PVDF, these bearings resist moisture absorption, so they won’t warp in underwater applications.

Use these bearings as miniature high-precision turntables. They have a unique design that allows your shaft to sit on top of the bearing rather than being inserted through it.

Use where high loads and speeds are not required.

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

The oil in these bearings is suitable for incidental contact with food.

Use where high loads and speeds are not required.

Graphite provides a layer of dry lubrication that operates in high-temperature environments.

Good for underwater applications, these bearings won’t swell or warp when wet.

These leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads.

Adapt high-precision needle-roller bearings to use on unhardened, unground shafts.

Thinner rollers allow these bearings to fit in tighter spaces than tapered-roller thrust bearings.

A slippery PTFE liner reduces wear and eliminates the need for lubrication.

Stronger than plastic models, these stainless steel swivel joints are also more corrosion resistant than steel joints.

The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

Larger OD tolerances than standard press-fit bushings allow for finishing. Bushings should be machine ground.

Made of durable tungsten carbide, these bushings outlast steel.

Replace worn bushings and quickly change IDs without needing to repeatedly use a lever press. Instead of pressing bushings in and out of your jig fixture, which can cause damage, these bushings slide in and out of sleeves.

The knurls resist force and provide better holding strength than serrations. Encase in plastic tooling.

Be prepared with ring shims in a variety of thicknesses. These shims fit around fasteners and shafts to precisely align, level, and adjust spacing.

These shims are made of layers of metal bonded with adhesive. Remove layers with a utility knife until you get the thickness you need.

Be prepared with ring shims in a variety of thicknesses. These shims are color-coded by thickness for easy identification.

Be prepared with shims in a variety of thicknesses. Also known as arbor spacers, these shims are notched to fit over keyed shafts.

These shims are shaped to fit over D-profile shafts. Use them to precisely align, level, and adjust spacing.

Use these round shims as they are, or punch out the middle to create the ID you need.