We will reply to your message within an hour.
More
These steel ball bearings handle higher loads than stainless steel and plastic bearings.
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.
For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.
With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.
Good for use in electric motors and power generators, these bearings have ceramic balls that insulate against stray current to prevent damage to the bearing.
Internal locking elements (sprags) lock to transmit torque in one direction while turning freely in the other direction.
Bearings are 440C stainless steel for good corrosion resistance.
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Bearings are 440C stainless steel.
Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and race that eliminates the need for additional lubrication.
These 316 stainless steel bearings are more corrosion resistant than our other stainless steel bearings, but they have a lower load capacity.
Made of slippery plastic, these bearings do not require lubrication and have excellent corrosion and chemical resistance.
With two rows of balls, these lightweight bearings have greater durability and load capacity—and a wider profile—than single-row plastic bearings.
Install these acetal bearings in caustic environments and where lubrication can’t be used. They have good all-around corrosion and chemical resistance.
Made with either PEEK or graphite, these ball bearings work in applications that are too hot for most other ball bearings.
Install these bearings for use with combined radial and thrust loads. They are often used in spindle applications and can be combined with cylindrical roller bearings to better handle radial loads.
An ABEC-7 rating means these bearings are made to some of the tightest tolerances, so they operate at the highest speeds.
Steel balls and washers allow these bearings to handle higher loads than bearings with stainless steel components.
Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together.
Thinner rollers allow these bearings to fit in tighter spaces than tapered-roller thrust bearings.
Adapt needle-roller thrust bearings to use on unhardened, unground surfaces.
Cylindrical-roller thrust bearings handle higher loads than needle-roller thrust bearings. They also run at faster speeds than tapered-roller thrust bearings.
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.
Use where high loads and speeds are not required.
Graphite provides a layer of dry lubrication that can operate in high-temperature environments.
A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface.
The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Thinner than standard linear sleeve bearings, these bearings fit where clearance is a concern.
Made of FDA-listed materials for use in food applications, these bearings also have excellent chemical and corrosion resistance.
Use these ultra-thin sleeve bearings in high-speed applications where clearance is a concern.
A flange with mounting holes makes it easy to attach a load to these bearings. Create a compact linear and rotary motion system for robots and other applications requiring complex, fast movements, by combining them with ball splines.
Also known as jig bushings, these metric drill bushings fit inside fixture plate holes to guide drill bits, counterbores, reamers, and other cutting tools. They improve accuracy so that your drilled holes and cuts are consistent from part to part.
Even under extreme drilling pressure, these metric bushings won't press through your jig plate. A flanged head on the top of the bushing acts as a stop, preventing it from moving as you push down your drill bit, reamer, or other cutting bit.
Also known as Trantorque bushings, these tighten with a twist of the collar nut—no screws needed.