McMaster-Carr logo
    Filter by
    Shaft Diameter
    Attribute Image
    System of Measurement
    Plain Bearing Type
    OD
    Attribute Image
    Flange OD
    Attribute Image
    Dynamic Radial Load Capacity @ Speed
    For Housing ID
    Attribute Image
    For Load Direction
    Flange Thickness
    DFARS Specialty Metals
    Dynamic Thrust Load Capacity @ Speed
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Maximum Temperature
    Bearing Type
    Shaft Type
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    2 Products

    Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    High-Strength 863 Iron Copper
    4046405657,000 lb. @ 30 rpm3,750 lb. @ 30 rpmSynthetic Oil-15 to 3002938T822000000
     

    Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Flanged Sleeve Bearings.
    These bearings don’t come with a lubricant, so you can select the oil that meets the needs of your application. You’ll need to refill the oil, so make sure the bearing is located where you can access it. All are fabricated and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    High-Strength 932 Bearing Bronze—These bearings are strong enough for sudden starts and stops, plus they resist wear and tear. They are cast from an alloy of leaded tin bronze for uniform rigidity and strength. Also known as 660 leaded bronze bearings.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Temp. Range,
    ° F
    Each
    High-Strength 932 Bearing Bronze
    4046205654,950 lb. @ 30 rpm7,450 lb. @ 30 rpm-350 to 4505448T29000000
     
    back to top