A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Bearings are 440C stainless steel.

Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and race that eliminates the need for additional lubrication.

Made of slippery plastic, these bearings do not require lubrication and have excellent corrosion and chemical resistance.

Made of PVDF, these bearings resist moisture absorption, so they won’t warp in underwater applications.

The flange ensures proper positioning inside a tube or housing.

Install these acetal bearings in caustic environments and where lubrication can’t be used. They have good all-around corrosion and chemical resistance.

A combination of stainless steel and nylon components provide increased corrosion resistance over standard thrust ball bearings.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

Made of acetal with a PTFE filler, these bearings handle velocities up to twice as high as standard acetal bearings. They swivel to compensate for a small amount of shaft misalignment.

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

The oil in these bearings is suitable for incidental contact with food.

Use where high loads and speeds are not required.

Graphite provides a layer of dry lubrication that operates in high-temperature environments.

Good for underwater applications, these bearings won’t swell or warp when wet.

These leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads.

Adapt high-precision needle-roller bearings to use on unhardened, unground shafts.

The choice for low-friction motion in high-temperature environments.

Designed to handle heavy loads, these bearings have higher load capacities than comparable standard linear ball bearings.

Ridges on the inside of these bearings wipe away dust and debris as the bearing travels on a shaft.

Made of FDA-listed materials for use in food applications, these bearings also have excellent chemical and corrosion resistance.

Made of FDA-listed materials for use in food applications, these bearings also have excellent chemical and corrosion resistance.

The shell, housing, and balls of these bearings are stainless steel for excellent corrosion resistance.

4130 alloy steel has a low carbon content that provides good weldability. It's often used for gears, fasteners, and structural applications.

Mount these two-piece collars anywhere on an Acme lead screw without removing components.

Larger OD tolerances than standard press-fit bushings allow for finishing. Bushings should be machine ground.

Made of durable tungsten carbide, these bushings outlast steel.

Replace worn bushings and quickly change IDs without needing to repeatedly use a lever press. Instead of pressing bushings in and out of your jig fixture, which can cause damage, these bushings slide in and out of sleeves.

The knurls resist force and provide better holding strength than serrations. Encase in plastic tooling.

The serrations at the top of the bushing grip to prevent rotation and spin out.

Be prepared with ring shims in a variety of thicknesses. These shims fit around fasteners and shafts to precisely align, level, and adjust spacing.

These shims are made of layers of metal bonded with adhesive. Remove layers with a utility knife until you get the thickness you need.

Be prepared with ring shims in a variety of thicknesses. These shims are color-coded by thickness for easy identification.

These shims are shaped to fit over D-profile shafts. Use them to precisely align, level, and adjust spacing.

Place these shims under sharpened dies to restore their original height and extend their life.