About Shaft Collars
Shaft collars are useful for holding and positioning components on a shaft. They can also serve as mechanical stops and stroke limiters.
More
About Plain Bearings
More
Light Duty Dry-Running Thrust Bearings
Use where high loads and speeds are not required.
Thermoplastic bearings are fiber reinforced and lubricant infused for good wear resistance and low friction with light and medium loads.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
| OD | Thick. | Dynamic Thrust Load Capacity | Color | Temp. Range, °F | Each | |
Thermoplastic Blend Bearings | ||||||
|---|---|---|---|---|---|---|
For 32 mm Shaft Dia. | ||||||
| 54mm | 1.5mm | 245 lbs. @ 30 rpm | Gray | -40° to 260° | 0000000 | 00000 |
Washdown Clamping Shaft Collars
Suitable for use in washdown applications, these plastic collars also offer good chemical resistance. They clamp evenly around the shaft to create a strong, mar-free hold. To use, slide onto your shaft and tighten the clamping screw to secure.
Acetal collars have a naturally slippery surface and resist swelling when exposed to moisture.
Clamping Screw | White Acetal Plastic | |||||
|---|---|---|---|---|---|---|
| For Shaft Dia., mm | OD, mm | Wd., mm | Type | No. Included | Each | |
| 30 | 54 | 15 | Socket Head Screw | 1 | 00000000 | 000000 |