6.02mm OD Bearings | McMaster-Carr

Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.

Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.

	For Housing ID, mm	Lg., mm	Dynamic Radial Load Cap. @ Speed	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



	3	6	4	37 lb. @ 120 rpm	Synthetic Oil	-35 to 300	0000000	00000


	3	6	6	55 lb. @ 120 rpm	Synthetic Oil	-35 to 300	00000000	0000
	3	6	10	90 lb. @ 120 rpm	Synthetic Oil	-35 to 300	00000000	0000


	High-Load 863 Iron Copper



			3	6	4	70 lb. @ 120 rpm	Synthetic Oil	-15 to 300	00000000	0000


			3	6	10	185 lb. @ 120 rpm	Synthetic Oil	-15 to 300	00000000	0000

Ultra-Low-Friction Oil-Embedded Sleeve Bearings

Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID, mm	Lg., mm	Dynamic Radial Load Cap. @ Speed	Base Oil	Lubricant Additive	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	3	6	4	37 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	00000000	00000


	3	6	10	90 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	00000000	0000


	High-Load 863 Iron Copper



			3	6	4	70 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	00000000	0000


			3	6	10	185 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	00000000	0000

Oil-Embedded Flanged Sleeve Bearings

Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

Mineral Oil Base—Mineral oil consistently lubricates at most temperatures but doesn’t last as long as synthetic oil.

	For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



	3	6	4	9	1.5	37 lb. @ 120 rpm	175 lb. @ 120 rpm	Synthetic Oil	-35 to 300	0000000	00000


	3	6	6	9	1.5	55 lb. @ 120 rpm	175 lb. @ 120 rpm	Mineral Oil	10 to 220	00000000	0000

Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Base Oil	Lubricant Additive	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	3	6	4	9	1.5	37 lb. @ 120 rpm	175 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	00000000	00000


	High-Load 863 Iron Copper



			3	6	4	9	1.5	70 lb. @ 120 rpm	270 lb. @ 120 rpm	Synthetic Oil	PTFE	-60 to 300	—	00000000	0000

Oil-Embedded Sleeve Bearings for Food and Beverage

These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for unintended contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for contact with food, consider dry-running sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID, mm	Lg., mm	Dynamic Radial Load Cap. @ Speed	Base Oil	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	3	6	10	90 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	00000000	00000


	High-Load 863 Iron Copper



			3	6	4	70 lb. @ 120 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, ASTM B439	00000000	0000