Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and ring that eliminates the need for additional lubrication. The solid lubricant blocks out water and dust, extending the life of the bearing.

Sealed bearings have even better resistance to dust and contaminants than open bearings.

For technical drawings and 3-D models, click on a part number.

Install these bearings for use with combined radial and thrust loads. They are often used in spindle applications and can be combined with cylindrical roller bearings to better handle radial loads.

Single-row bearings handle thrust loads on one side. For applications with thrust loads on both sides, mount them in pairs.

Open bearings dissipate heat more efficiently than shielded and sealed bearings.

For technical drawings and 3-D models, click on a part number.

These bearings have angular raceways for combined thrust and radial loads—install them where precision tolerances are required for accuracy and high speeds. They’re often used in spindle applications. To handle thrust loads in both directions, they have a double-row construction. Pair them with cylindrical roller bearings to better handle radial loads. They have an open construction to dissipate heat efficiently.

For technical drawings and 3-D models, click on a part number.

Bearings are for use with round end-supported shafts. To install, slide bearings into a housing (not included). For bearings with retaining ring grooves, secure with two retaining rings (sold individually).

Bearings with end seals keep lubricant in and dust out.

Bearings with stainless steel balls are more corrosion resistant than bearings with steel balls.

Fixed-alignment bearings are for use where shaft misalignment is unlikely.

For technical drawings and 3-D models, click on a part number.

The choice for low-friction motion in high-temperature environments. Bearings are for use with round end-supported shafts and have a fixed-alignment design for applications where shaft misalignment is unlikely. To install, slide bearings into a housing (not included). For bearings with retaining ring grooves, secure with two retaining rings (sold individually).

Stainless steel bearings are more corrosion resistant than steel bearings.

For technical drawings and 3-D models, click on a part number.

Designed to handle heavy loads, these bearings have higher load capacities than comparable standard linear ball bearings. They are for use with round end-supported shafts and have a self-aligning design to compensate for shaft misalignment. To install, slide bearings into a housing (not included). For bearings with retaining ring grooves, secure with two retaining rings (sold individually).

Bearing with stainless steel balls is more corrosion resistant than bearings with steel balls.

For technical drawings and 3-D models, click on a part number.

Bearings are for use with round end-supported shafts. To install, slide bearings into a housing (not included) and secure with two retaining rings (sold individually).

Self Aligning—Bearings compensate for shaft misalignment.

Fixed Alignment—Bearings are for use where shaft misalignment is unlikely.

PTFE-lined bearings are chemical resistant and nonabrasive. They have a ceramic coating for added corrosion resistance.

For technical drawings and 3-D models, click on a part number.

Ridges on the inside of these bearings wipe away dust and debris. To install, slide bearings into a housing (not included) and secure with two retaining rings (sold individually). All bearings are lined with lightweight, corrosion- and chemical-resistant PTFE.

Self-aligning bearings compensate for shaft misalignment. Fixed-alignment bearings are designed for use with round, end-supported shafts where shaft misalignment is unlikely.

6061 aluminum bearings have good corrosion resistance, and have a higher load capacity than bearings made entirely of PTFE.

For technical drawings and 3-D models, click on a part number.

A ceramic liner makes high speeds as well as rapid acceleration and deceleration possible. Bearings are for use with round end-supported shafts. They have a fixed-alignment design for applications where shaft misalignment is unlikely. To install, slide bearings into a housing (not included) and secure with two retaining rings (sold individually).

For technical drawings and 3-D models, click on a part number.

Made of FDA-listed materials for use in food applications, these bearings also have excellent chemical and corrosion resistance. They have a fixed-alignment design for applications where shaft misalignment is unlikely. To install, slide bearings into a housing (not included) and secure with two retaining rings (sold individually).

For technical drawings and 3-D models, click on a part number.

Mount these bearings on a support rail shaft for applications requiring maximum rigidity. All have end seals to keep lubricant in and dirt out. To install, slide bearings into a housing (not included) and secure in place with two retaining rings (sold individually).

Bearings with stainless steel balls are more corrosion resistant than bearings with steel balls.

Fixed-alignment bearings are for use where shaft misalignment is unlinkely.

For technical drawings and 3-D models, click on a part number.

Mount these bearings on a support rail shaft for applications requiring maximum rigidity. To install, slide bearings into a housing (not included) and secure with two retaining rings (sold individually).

Self Aligning—Bearings compensate for shaft misalignment.

Fixed Alignment—Bearings are for use where shaft misalignment is unlikely.

PTFE-lined bearings are chemical resistant and nonabrasive. They have a ceramic coating for added corrosion resistance.

For technical drawings and 3-D models, click on a part number.

These bearings for use in food applications also have excellent chemical and corrosion resistance. Mount them on a support rail shaft for applications requiring maximum rigidity. They have a fixed-alignment design for applications where shaft misalignment is unlikely. To install, slide bearings into a housing (not included) and secure in place with two retaining rings (sold individually).

For technical drawings and 3-D models, click on a part number.

These bearings have a ceramic liner to help them achieve high speeds as well as rapid acceleration and deceleration. Mount them on support rail shafts for applications requiring maximum rigidity. To install, slide bearings into a housing (not included) and secure in place with two retaining rings (sold individually).

Fixed-alignment bearings are for use where shaft misalignment is unlikely.

Self-aligning bearings compensate for shaft misalignment.

For technical drawings and 3-D models, click on a part number.

With a grooved inner diameter, these bearings are designed to work with splined shafts. Together, they transmit rotary power while allowing the bearing to move freely along the length of the shaft. All are for use where shaft misalignment is unlikely.

Also known as ball splines, ball bearings run with less friction than plain bearings, so they're smoother and more precise, even at high speeds. However, they don't transmit as much torque as plain bearings. They're commonly used for robotic systems and other automated applications that require complex, fast movements.

For technical drawings and 3-D models, click on a part number.

The flanged housing makes these bearings a good solution for vertical linear motion applications. All are for use with round end-supported shafts and have a fixed-alignment design for use where shaft misalignment is unlikely. End seals keep lubricant in and dirt out.

For technical drawings and 3-D models, click on a part number.

A flanged housing with mounting holes connects these bearings directly to your system. They have a grooved inner diameter that's designed to work with spline shafts. Together, they transmit rotary power while allowing the bearing to move freely along the length of the shaft. Wide and flat, the flange is especially useful for lifting and lowering loads on vertical shafts. All are for use where shaft misalignment is unlikely.

Also known as ball splines, ball bearings run with less friction than plain bearings, so they're smoother and more precise, even at high speeds. However, they don't transmit as much torque as plain bearings. They're commonly used for robotic systems and other automated applications that require complex, fast movements.

For technical drawings and 3-D models, click on a part number.

Often paired with spring lock washers to strengthen their hold, these retaining nuts—also known as shaft nuts—keep vibration from shifting bearings, bushings, pulleys, and gears on your threaded shaft or spindle. They have slotted sides, so you can tighten and loosen them with a spanner wrench or spanner socket. Made of carbon steel, they’re strong and wear resistant.

Use stepped-face retaining nuts with DIN 462 spring lock washers. You can also use them in pairs or with other bearing retaining nuts as jam nuts. For the nut closer to the bearing, position the stepped face towards the bearing. All meet DIN standards for bearing lockout dimensions.

Chamfered-face retaining nuts weigh less and produce less heat than stepped-face nuts. They meet ISO 2982 (formerly DIN 981), an international standard for bearing locknut dimensions. Their sizes correspond to SKF KM series. Use them with DIN 5406 spring lock washers.

For technical drawings and 3-D models, click on a part number.