Manufacturer Manufacturer | Show |
|---|
|
Manufacturer Manufacturer | Hide |
|---|
|
|
Color Color | Show |
|---|
 | Beige |
Color Color | Hide |
|---|
Container Type Container Type |
|---|
 | Cartridge |
For Use On For Use On |
|---|
Container Size Container Size |
|---|
|
Shear Strength Shear Strength |
|---|
|
Consistency Consistency |
|---|
|
Type Type |
|---|
|
Formulation Formulation |
|---|
|
Adhesive Type Adhesive Type |
|---|
|
Connection Type Connection Type |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Cure Type Cure Type |
|---|
|
Mixing Required Mixing Required |
|---|
|
Approximate Coverage Approximate Coverage |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Epoxy Structural Adhesives
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals. The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
9460 and E-20NS are nonsagging, so they won't drip from vertical or overhead surfaces.
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| 1C-LV | 1.69 fl. oz. | Cartridge | 20 min. | 72 hrs. | 2,100 | Not Rated | 2:1 | Thick Liquid (66,750 cP) | -65° to 250° | Beige | Metal, Plastic, Rubber | 0000000 | 000000 |
| E-20NS | 1.69 fl. oz. | Cartridge | 20 min. | 24 hrs. | 2,790 | Not Rated | 2:1 | Thick Liquid (60,000 cP) | -65° to 250° | Beige | Metal, Plastic, Rubber | 0000000 | 00000 |
Toughened Epoxy Structural Adhesives
Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds. The most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
The size listed is the combined total of the two parts. Use with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
DP420NS, DP460NS, E-40HT, and 9462 are nonsagging, so they won't drip from vertical or overhead surfaces.
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| 9462 | 1.69 | Cartridge | 55 min. | 72 hrs. | 4,180 | 22 | 1:1 | Thick Liquid (70,000 cP) | -65° to 250° | Beige | Metal, Plastic, Rubber | 0000000 | 000000 |