Width Width |
|---|
Length Length |
|---|
Material Material |
|---|
|
|
Buckle Type Buckle Type |
|---|
 | Squeeze Release |
 | Cam |
 | Feed Through |
 | Ratchet |
 | Flip Lock |
 | Hinged Bar |
 | Slide Bar |
 | Spring- Loaded Clamp |
Reinforcement Material Reinforcement Material |
|---|
|
Capacity Capacity |
|---|
|
|
For Lace Number For Lace Number |
|---|
Belt Trade Number Belt Trade Number |
|---|
Finish Finish |
|---|
|
End Plates for Cut-to-Length Timing Belts
Secure the ends of Cut-to-Length Timing Belts to flat surfaces for linear motion drive applications. End plates fit belts with trapezoidal teeth.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Belt Trade Size | Lg. | Wd. | Material | Number of | Dia., mm | Fasteners Included | Each | |
| XL | 4.72" | 1.97" | Aluminum | 8 | 5.5 | No | 0000000 | 000000 |
| L | 6.3" | 1.97" | Aluminum | 8 | 6.5 | No | 0000000 | 00000 |
| L | 6.3" | 2.36" | Aluminum | 8 | 6.5 | No | 0000000 | 00000 |
| L | 6.3" | 4.33" | Aluminum | 8 | 6.5 | No | 0000000 | 00000 |
| H | 6.3" | 1.97" | Aluminum | 8 | 6.5 | No | 0000000 | 00000 |
| H | 6.3" | 2.36" | Aluminum | 8 | 6.5 | No | 0000000 | 00000 |
| H | 6.3" | 2.95" | Aluminum | 8 | 6.5 | No | 0000000 | 00000 |
| H | 6.3" | 4.33" | Aluminum | 8 | 6.5 | No | 0000000 | 00000 |
| AT10 | 6.3" | 1.97" | Aluminum | 8 | 6.5 | No | 0000000 | 00000 |
H Series Cut-to-Length Timing Belts
Designed for use in linear motion drives, these belts are neoprene with fiberglass reinforcement for quiet operation with high strength. They are H series (heavy) and have trapezoidal teeth. The teeth are nylon coated to protect the wear surface and minimize friction.
Secure belt ends to a flat surface with end plates.
These belts have a maximum continuous length of 50 feet.
For technical drawings and 3-D models, click on a part number.
Timing Belts | End Plates | |||||||
|---|---|---|---|---|---|---|---|---|
| Belt Trade Number | Pitch | Material | Color | Temperature Range, ° F | Per Ft. | Each | ||
1/2" Wd. | ||||||||
| LL050H | 0.500" | Neoprene | Black | -20° to 180° | 0000000 | 00000 | 0000000 | 000000 |
3/4" Wd. | ||||||||
| LL075H | 0.500" | Neoprene | Black | -20° to 180° | 0000000 | 0000 | 0000000 | 00000 |
1" Wd. | ||||||||
| LL100H | 0.500" | Neoprene | Black | -20° to 180° | 000000 | 00000 | 0000000 | 00000 |
1 1/2" Wd. | ||||||||
| LL150H | 0.500" | Neoprene | Black | -20° to 180° | 0000000 | 00000 | 0000000 | 00000 |
2" Wd. | ||||||||
| LL200H | 0.500" | Neoprene | Black | -20° to 180° | 0000000 | 00000 | 0000000 | 00000 |
3" Wd. | ||||||||
| LL300H | 0.500" | Neoprene | Black | -20° to 180° | 0000000 | 00000 | 0000000 | 00000 |
H Series Dust-Free Cut-to-Length Timing Belts
Known for excellent abrasion resistance, use a urethane belt in your linear motion application to avoid dust from wear. They have Kevlar reinforcement, which has very high strength, low stretch, and excellent shock resistance. Belts are H series (heavy) and have trapezoidal teeth.
Secure belt ends to a flat surface with end plates.
For technical drawings and 3-D models, click on a part number.
L Series Cut-to-Length Timing Belts
Quiet-running neoprene is reinforced with high-strength fiberglass for use in general purpose linear motion drives. Belts are L series (light) and have trapezoidal teeth. The teeth are nylon coated to protect the wear surface and minimize friction.
Secure belt ends to a flat surface with end plates.
These belts have a maximum continuous length of 50 feet.
For technical drawings and 3-D models, click on a part number.
L Series Dust-Free Cut-to-Length Timing Belts
Known for excellent abrasion resistance, use one of these urethane belts in your linear motion application to avoid dust from wear. Belts have Kevlar reinforcement, which has very high strength, low stretch, and excellent shock resistance. All are L series (light) and have trapezoidal teeth.
Secure belt ends to a flat surface with end plates.
For technical drawings and 3-D models, click on a part number.
Timing Belts | End Plates | |||||||
|---|---|---|---|---|---|---|---|---|
| Belt Trade Number | Pitch | Material | Color | Temperature Range, °F | Per Ft. | Each | ||
3/8" Wd. | ||||||||
| L037KX328 | 0.375" | Urethane | White | -13° to 176° | 00000000 | 00000 | 0000000 | 000000 |
1/2" Wd. | ||||||||
| L050KX328 | 0.375" | Urethane | White | -13° to 176° | 000000 | 0000 | 0000000 | 00000 |
3/4" Wd. | ||||||||
| L075KX328 | 0.375" | Urethane | White | -13° to 176° | 000000 | 0000 | 0000000 | 00000 |
1" Wd. | ||||||||
| L100KX328 | 0.375" | Urethane | White | -13° to 176° | 00000000 | 0000 | 0000000 | 00000 |
1 1/2" Wd. | ||||||||
| L150KX328 | 0.375" | Urethane | White | -13° to 176° | 00000000 | 00000 | 0000000 | 00000 |
3" Wd. | ||||||||
| L300KX328 | 0.375" | Urethane | White | -13° to 176° | 00000000 | 00000 | 0000000 | 00000 |
XL Series Cut-to-Length Timing Belts
Use quiet-running neoprene with high-strength fiberglass reinforcement in your linear motion drive system. Belts are XL series (extra light) and have trapezoidal teeth. The teeth are nylon coated to protect the wear surface and minimize friction.
Secure belt ends to a flat surface with end plates.
These belts have a maximum continuous length of 50 feet.
For technical drawings and 3-D models, click on a part number.
XL Series Dust-Free Cut-to-Length Timing Belts
Drive linear motion while maintaining a clean environment—urethane has excellent abrasion resistance, so these belts don’t create dust while they run. They have Kevlar reinforcement, which has very high strength, low stretch, and excellent shock resistance. Belts are XL series (extra light) and have trapezoidal teeth.
Secure belt ends to a flat surface with end plates.
For technical drawings and 3-D models, click on a part number.
AT Series Dust-Free Cut-to-Length Timing Belts
Urethane has excellent abrasion resistance, so these belts don’t create dust while they run. They have steel reinforcement, which has very high strength, low stretch, and excellent shock resistance.
Secure belt ends to a flat surface with end plates.
For technical drawings and 3-D models, click on a part number.
Load-Rated Sew-On Buckles for Webbing
Permanently sew webbing onto the buckles to create high-tension tie down straps.
Feed-through buckles are easy to cinch. Lift the buckle to release.
Flip-lock buckles, also known as over-center buckles, tighten by flipping the lever-style buckle.
Cam buckles tighten fast. Pull the strap through to tighten; lift the cam to release.
Ratchet buckles tighten incrementally for maximum tension.
Stainless steel fittings are more corrosion resistant than zinc-plated steel fittings.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
| For Max. Webbing Wd. | Capacity, lbs. | Wd. | Lg. | Each | |
Feed Through | |||||
|---|---|---|---|---|---|
Stainless Steel | |||||
| 1" | 500 | 1 3/8" | 2 7/16" | 0000000 | 00000 |
Flip Lock | |||||
Zinc-Plated Steel | |||||
| 1" | 330 | 1 1/2" | 3 3/4" | 0000000 | 0000 |
| 2" | 500 | 2 3/4" | 5 1/8" | 0000000 | 0000 |
Stainless Steel | |||||
| 1" | 260 | 1 1/2" | 3 5/8" | 0000000 | 00000 |
| 2" | 500 | 2 11/16" | 7 1/8" | 0000000 | 00000 |
Cam | |||||
Zinc-Plated Steel | |||||
| 1" | 400 | 1 1/2" | 2 1/2" | 0000000 | 0000 |
| 2" | 830 | 2 7/16" | 2 15/16" | 0000000 | 00000 |
Stainless Steel | |||||
| 1" | 100 | 1 3/16" | 1 3/4" | 0000000 | 0000 |
Ratchet | |||||
Zinc-Plated Steel | |||||
| 1" | 500 | 2 1/16" | 4 7/16" | 000000 | 0000 |
| 2" | 3,670 | 4 3/16" | 7 5/8" | 0000000 | 00000 |
Stainless Steel | |||||
| 1" | 350 | 2" | 4 1/2" | 0000000 | 00000 |
| 1 1/2" | 1,320 | 3 1/16" | 5 7/8" | 0000000 | 00000 |
| 2" | 1,670 | 3 1/2" | 6 9/16" | 0000000 | 00000 |
Light Duty Sew-On Buckles for Webbing
Sew webbing onto these buckles for use as light duty straps on backpacks and bags.
Feed-through buckles are easy to cinch. Lift the buckle to release.
Hinged-bar buckles hold tight upon cinching; push down on the buckle to release.
Squeeze-release buckles quickly release with one hand.
Cam buckles tighten fast. Pull the strap through to tighten; lift the cam to release.
Spring-loaded clamp buckles have a spring and gripping teeth to hold webbing tight. Push down on the clamp to release.
Slide-bar buckles have a movable center bar for quick cinching.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
| For Max. Webbing Wd. | Wd. | Lg. | Color | Pkg. Qty. | Pkg. | |
Feed Through | ||||||
|---|---|---|---|---|---|---|
Plastic | ||||||
| 3/4" | 15/16" | 1 9/16" | Black | 25 | 00000000 | 00000 |
| 1" | 1 5/16" | 1 9/16" | Black | 25 | 00000000 | 0000 |
| 1 1/2" | 2" | 2 1/8" | Black | 25 | 00000000 | 00000 |
| 2" | 2 7/16" | 2 15/16" | Black | 5 | 00000000 | 00000 |
Hinged Bar | ||||||
Nickel-Plated Steel | ||||||
| 1 1/2" | 2 1/16" | 2" | __ | 1 | 0000000 | 0000 |
| 2" | 2 1/2" | 2 5/16" | __ | 1 | 0000000 | 0000 |
Squeeze Release | ||||||
Plastic | ||||||
| 3/4" | 1" | 2 1/16" | Black | 10 | 00000000 | 0000 |
| 1" | 1 5/16" | 2 11/16" | Black | 10 | 00000000 | 0000 |
| 1 1/2" | 1 7/8" | 2 3/4" | Black | 10 | 000000000 | 00000 |
| 2" | 2 5/16" | 2 7/8" | Black | 5 | 00000000 | 00000 |
Aluminum | ||||||
| 3/4" | 1" | 2" | __ | 1 | 0000000 | 0000 |
| 1" | 1 5/16" | 2 1/2" | __ | 1 | 0000000 | 0000 |
| 1 1/2" | 1 13/16" | 2 11/16" | __ | 1 | 0000000 | 0000 |
| 2" | 2 3/8" | 2 11/16" | __ | 1 | 0000000 | 0000 |
Cam | ||||||
Plastic | ||||||
| 3/4" | 1" | 1 3/16" | Black | 10 | 00000000 | 0000 |
| 1" | 1 1/4" | 1 7/16" | Black | 10 | 00000000 | 0000 |
| 1 1/2" | 1 13/16" | 2 3/16" | Black | 10 | 00000000 | 00000 |
Spring-Loaded Clamp | ||||||
Nickel-Plated Steel | ||||||
| 1" | 1 3/8" | 2 7/16" | __ | 1 | 0000000 | 0000 |
Slide Bar | ||||||
Nickel-Plated Steel | ||||||
| 3/4" | 1" | 1 1/8" | __ | 5 | 0000000 | 0000 |
| 1" | 1 1/4" | 1 3/8" | __ | 5 | 0000000 | 0000 |
Light Duty No-Sew Buckles for Webbing
These buckles have a bar that grips webbing tightly without sewing. Use them for light duty strapping applications, such as on backpacks and bags.
Feed-through buckles are easy to cinch. Lift the buckle to release.
Squeeze-release buckles quickly release with one hand. Style C buckles have wings so it's easier to open with gloved hands.
Cam buckles tighten fast. Pull the strap through to tighten; lift the cam to release.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
| Style | For Max. Webbing Wd. | Wd. | Lg. | Color | Pkg. Qty. | Pkg. | |
Feed Through | |||||||
|---|---|---|---|---|---|---|---|
Plastic | |||||||
| A | 3/4" | 1" | 1 9/16" | Black | 25 | 00000000 | 00000 |
| A | 1" | 1 5/16" | 1 9/16" | Black | 25 | 00000000 | 0000 |
Squeeze Release | |||||||
Plastic | |||||||
| B | 1" | 1 5/16" | 2 15/16" | Black | 10 | 00000000 | 0000 |
| B | 1 1/2" | 1 7/8" | 2 15/16" | Black | 5 | 00000000 | 00000 |
| B | 2" | 2 5/16" | 3 1/16" | Black | 5 | 00000000 | 00000 |
| C | 1" | 1 11/16" | 3" | Black | 10 | 00000000 | 00000 |
| C | 2" | 2 3/4" | 3 3/4" | Black | 5 | 000000000 | 00000 |
Cam | |||||||
Plastic | |||||||
| D | 2" | 2 3/8" | 2 15/16" | Black | 5 | 00000000 | 00000 |
Load-Rated No-Sew Buckles for Webbing
Attach webbing to these buckles without sewing.
Ratchet buckles tighten incrementally for maximum tension. They have a hook on one end so you can secure them to an anchor point. Thread webbing through the other end.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
| For Max. Webbing Wd. | Capacity, lbs. | Wd. | Lg. | Hook Opening Wd. | Each | |
Ratchet | ||||||
|---|---|---|---|---|---|---|
Zinc-Plated Steel | ||||||
| 2" | 3,670 | 4 3/16" | 10 1/2" | 1 1/4" | 0000000 | 000000 |
Lacers for Quick-Install Hook-Style Lacing
Lacers quickly clinch lengths of lacing in a single operation. To lace belts wider than the working width, repeat the lacing operation.
Style A lacers mount in a vise. Styles B and C lacers are wider for more efficient installation.
Holding strips (sold separately) are required for Styles B and C to load the lacing.
Note: Lacers work with lacing in all leg and point styles for a given lace number.
Lacers | |||||||||
|---|---|---|---|---|---|---|---|---|---|
O'all | Holding Strips | ||||||||
| Style | For Lace No. | Working Wd. | Ht. | Wd. | Dp. | Each | Each | ||
| A | 25, 25LL, 25LP | 7" | 2" | 7 5/8" | 3 1/2" | 000000 | 0000000 | 000000 | 00 |
| A | 36, 36SP, 36LL, 36LLSP, UCM36, UCM36SP, UCM36LL, UCM36LLSP | 7" | 2" | 7 5/8" | 3 1/2" | 000000 | 000000 | 000000 | 00 |
| A | 1, 1SP, 1LL, 1XSP, UX1, UX1SP | 7" | 2" | 7 5/8" | 3 1/2" | 000000 | 000000 | 000000 | 00 |
| A | 2, 2SP, 3, 4, 4 1/2, 5, 6, 7, U3-1, U3-2, U3, U4, U5 | 4" | 2" | 5" | 3 1/2" | 000000 | 00000 | 000000 | 00 |
| A | 2, 2SP, 3, 4, 4 1/2, 5, 6, 7, U3-1, U3-2, U3, U4, U5 | 7" | 2" | 7 5/8" | 3 1/2" | 000000 | 000000 | 000000 | 00 |
| B | 36, 36SP, 36LL, 36LLSP, 1, 1SP, 1LL, 1XSP, 2, 2SP, 3, 4, 4 1/2, 5, 6, 7, UCM36, UCM36SP, UCM36LL, UCM36LLSP, UX1, UX1SP, U3-1, U3-2, U3, U4, U5 | 14" | 15" | 20" | 10" | 00000000 | 00000000 | 0000000 | 0000000 |
| C | 36, 36SP, 36LL, 36LLSP, 1, 1SP, 1LL, 1XSP, 2, 2SP, 3, 4, 4 1/2, 5, 6, 7, UCM36, UCM36SP, UCM36LL, UCM36LLSP, UX1, UX1SP, U3-1, U3-2, U3, U4, U5 | 24" | 15" | 30" | 10" | 0000000 | 00000000 | 000000 | 000000 |
| C | 36, 36SP, 36LL, 36LLSP, 1, 1SP, 1LL, 1XSP, 2, 2SP, 3, 4, 4 1/2, 5, 6, 7, UCM36, UCM36SP, UCM36LL, UCM36LLSP, UX1, UX1SP, U3-1, U3-2, U3, U4, U5 | 36" | 15" | 42" | 10" | 0000000 | 00000000 | 000000 | 000000 |
| C | 36, 36SP, 36LL, 36LLSP, 1, 1SP, 1LL, 1XSP, 2, 2SP, 3, 4, 4 1/2, 5, 6, 7, UCM36, UCM36SP, UCM36LL, UCM36LLSP, UX1, UX1SP, U3-1, U3-2, U3, U4, U5 | 48" | 15" | 54" | 10" | 0000000 | 00000000 | 000000 | 000000 |
| C | 36, 36SP, 36LL, 36LLSP, 1, 1SP, 1LL, 1XSP, 2, 2SP, 3, 4, 4 1/2, 5, 6, 7, UCM36, UCM36SP, UCM36LL, UCM36LLSP, UX1, UX1SP, U3-1, U3-2, U3, U4, U5 | 60" | 15" | 66" | 10" | 0000000 | 00000000 | 000000 | 000000 |
No-Sew Hooks with Quick-Tight Buckles
Quickly increase and release tension with the cam buckle on these hooks. They grip webbing tightly so there's no need to sew webbing on. Webbing is sold separately.
Warning: Never use for lifting applications.